Search Results
703
Products for "MT-B-LDP"
Filter
- Description
- Fully automatic, high-productivity and compact powder actuated tool for fastening X-BT threaded stud
- Dimensions (LxWxH)
- 17 x 2.2 x 6.5 in
- Weight
- 5.2 lb
- Fastener Intake
- Threaded stud
New
- Description
- Stud Fusion hand tool for more comfortable, maneuverable and efficient fastening of F-BT threaded studs to steel
- Application
- Fastening to steel
- Battery voltage compatibility
- FX 3-A
- Certificates
- CE
- Description
- Fully automatic, high-productivity and compact powder actuated tool for fastening X-BT threaded stud
- Dimensions (LxWxH)
- 15.9 x 2.2 x 6.5 in
- Weight
- 5 lb
- Fastener Intake
- Threaded stud
- Description
- Powerful construction vacuum for daily jobsite clean ups (wet & dry), 5 gallon tank
- Water capacity
- 5.3 gal (US)
- Container capacity
- 30 l
- Dust capacity
- 51 lb
ultimate
- Description
- MC/AC cable stacker for supporting multiple metal-clad/armored cables directly to walls or ceilings
- Application
- Conduit Fastening, Cable Fastenings
- Material
- Carbon steel
- Attachable to
- Directly to base material
premium
- Description
- Carbon steel threaded stud for use with powder actuated nailers on concrete (10 mm washer)
- Base materials
- Concrete (soft), Concrete (tough)
- Corrosion protection
- Galvanized zinc coated <20 µm
- Environmental Conditions
- Dry indoor
ultimate
- Description
- MC/AC cable stacker with batwing clip for supporting multiple metal-clad/armored cables to a drop rod
- Application
- Conduit Fastening, Cable Fastenings
- Material
- Carbon steel
- Base materials
- Concrete
- Description
- Horizontal rail for installation of cassettes
- Material composition
- EN AW-6063 T66
- Description
- Equidist Cured Concrete Low HP FSB
- Tool type
- Floor saw
- Base material
- Concrete
- Wet or dry operation
- Wet
premium
- Description
- Plastic bunched cable holder for use with collated nails
- Application
- Cable Fastenings, Conduit Fastening
- Material
- Polyamide (PA), Halogen-free, Flame-retardant, UV-resistant (fair)
- For use with (tools)
- BX 3, DX 351, DX 460, DX 5, DX 6, GX 3
premium
- Description
- Batwing hanger for attaching single MC/AC cables, EMTs and rigid conduits to drop rods, wires or beam flanges
- Application
- Conduit Fastening, Cable Fastenings
- Material
- Carbon steel
- Base materials
- Concrete
- Description
- Serrated T-bolts for tension, perpendicular and parallel shear loads (3D loads)
- Material, corrosion
- Carbon Steel, Hot-Dip Galvanized, Carbon steel, zinc-plated
- Compatible Anchor Channel
- HAC-30
- Channel profile
- HAC-V-T 50, HAC-V-T 70, HAC-V-T EDGE, HAC-V-T Rebar XTS
- Description
- Collated .27 caliber cartridges for use with stand-up powder-actuated nailers for fastening metal decks
- For use with (tools)
- DX 860-HSN, DX 9-HSN
- Cartridge type
- .27 caliber short, 6.8/11 M40
- Approvals
- CE, CIP, PTB
- Description
- High-performance pre-bent anchor rod for use in unreinforced masonry with HIT-HY 270 injectable adhesive anchor (carbon steel, ASTM F1554 grade 36, zinc-plated)
- Material, corrosion
- Carbon steel, zinc-plated
- Base materials
- Masonry (multi wythe brick/unreinforced masonry)
- Cleaning procedures
- Compressed-Air Cleaning, Manual Cleaning
- Description
- Sharp-tipped, wide letter and number characters for stamping identification markings onto metal
- Application
- Marking cold steel, Marking hot steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Character type
- Sharp
- Description
- Round-tipped, wide letter and number characters for stamping identification markings onto metal
- Application
- Marking cold steel, Marking hot steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Character type
- Low stress
- Description
- Sharp-tipped, narrow letter and number characters for stamping identification markings onto metal
- Application
- Marking cold steel, Marking hot steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Character type
- Sharp
- Description
- Round-tipped, narrow letter and number characters for stamping identification markings onto metal
- Application
- Marking cold steel, Marking hot steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Character type
- Low stress
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- Accessory type
- Screws
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- For use with
- DST 20-CA
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- Accessory type
- Hand tools
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- Accessory type
- Flanges
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- Accessory type
- Flanges
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- Accessory type
- Flanges
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- Accessory type
- Flanges
- Description
- Ultimate SDS Plus (TE-C) hammer drill bits sets with different bit diameters and lengths (imperial)
- Connection end
- TE-C (SDS Plus)
- Base material
- Reinforced concrete, Concrete, Brick, Masonry
- Working mode
- Hammer drilling
- Description
- Separate washer for MFT-FOX H
- Height
- 25.3 mm
- Length
- 19.6 mm
- Material composition
- Aluminium
- Description
- Ultimate-performance multi-thread, cast-in-place threaded inserts for concrete on wood formwork with approvals
No technical data available
ultimate
- Description
- Male-Female coated carbon steel threaded standoff for fastening to passive fire protection (PFP) coated steel beams
- Point type
- N/A
- Base materials
- Steel
- Corrosion protection
- Duplex coating equivalent to 45 µm hot dipped galvanized
- Description
- Ultimate-performance multi-thread long plate cast-in-place anchor for concrete on metal deck with approvals
No technical data available
- Description
- Sharp-tipped, wide special characters for stamping identification markings onto metal
- Application
- Marking cold steel, Marking hot steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Character type
- Sharp
- Description
- Sharp-tipped, narrow special characters for stamping identification markings onto metal
- Application
- Marking cold steel, Marking hot steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Character type
- Sharp
premium
- Description
- Single nails with washer for sill plate attachment on concrete using powder-actuated tools
- Base materials
- Concrete (soft)
- Minimum thickness of base material (concrete)
- 80 mm
- Environmental Conditions
- Dry indoor
- Description
- Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools
- Additional Accessory Information
- T-handle for tightening X-BT threaded studs
- Description
- Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools
- Additional Accessory Information
- Torque tool for tightening X-BT threaded studs
- Description
- High-performance single nail with steel washer for fastening to concrete and steel using powder-actuated tools
- Base materials
- Concrete (soft), Concrete (tough), Steel
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Hot-dip galvanized (HDG) single beam clamp for connecting MI steel baseplates to steel beams
- Material composition
- Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Omega support profile for façade panel substructures (3 mm material thickness)
- Height
- 90 mm
- Width
- 110 mm
- Length
- 6000 mm
- Description
- Sealing for the DD-WC-ML water dam for core bit diameters from 24 mm (15/16") to 250 mm (9-13/16")
- Accessory type
- Sealing washers
- For use with
- DD 200, DD 250, DD 250-CA, DD 350-CA, DD 500-CA
- Description
- Firestop Preformed Solution for top-of-wall drywall joints under metal deck – eliminates the need for slow, messy stuff-and-spray firestop
- Length
- 48 in
- Application
- Joints
- Movement
- Yes
- Description
- Firestop Preformed solution for top-of-wall drywall joints under metal deck – eliminates the need for slow, messy stuff-and-spray firestop
- Application
- Joints
- Movement
- Yes
- Product Class
- Ultimate
- Description
- High-performance collated nails for fastening to concrete and steel using powder-actuated tools
- Base materials
- Concrete (soft), Concrete (tough), Steel
- Minimum thickness of base material (concrete)
- 80 mm
- Minimum thickness of base material (steel)
- 1/4 in
- Description
- Firestop Preformed solution for top-of-wall drywall joints under metal deck – eliminates the need for slow, messy stuff-and-spray firestop
- Length
- 120 in
- Application
- Joints
- Movement
- Yes
- Description
- High-temperature endothermic mat for passive fire protection of critical cable circuits, fuel lines, communication systems and many other MEP systems
- Thickness
- 0.5 in
- Weight
- 54.4 lb
- Application temperature range
- 14 - 122 °F
- Description
- Universal fasteners for concrete
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick)
- Minimum thickness of base material (steel)
- 1/4 in
- Corrosion protection
- Galvanized zinc coated <20 µm
premium
- Description
- High-performance single nail for fastening to concrete and steel using powder-actuated tools
- Base materials
- Concrete (soft), Concrete (tough), Steel
- Minimum thickness of base material (concrete)
- 80 mm
- Minimum thickness of base material (steel)
- 1/4 in
- Description
- Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- Basket clip with preassembled nail for fastening rebar baskets to road beds
- Material
- Carbon steel
- Color
- Grey
- Application
- Formwork
- Description
- Ultimate core bit for coring in all types of concrete – for <2.5 kW tools
- For use with
- DD 120, DD 130, DD 150-U, DD 160
- Base materials
- Concrete
- Drilling Mode
- Rig-mounted
- Description
- Collated self-drilling screws for use with the SDT 9 stand-up handle for sidelap and frame fastening
- Screw drive/recess type
- 5/16 Hexagon
- Base materials
- Carbon steel
- Environmental Conditions
- Dry indoor
- Description
- Magnetic ground clamp (X-MC F3) and ground cable (X-GC F3) help close the electrical circuit during stud fusion
No technical data available
- Description
- Rivet nose piece set for fastening steel, aluminum and stainless-steel rivets with your RT 6-22 cordless rivet tool (set includes 2.4mm, 3.2mm, 4.0mm and 4.8mm)
No technical data available
- Description
- Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to wood or metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to wood
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- Collated exterior sheathing screw (corrosion-resistant coating) for SD-M 1 or SD-M 2 for fastening exterior sheathing boards to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- Collated drywall screw (zinc-plated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
premium
- Description
- Carbon steel threaded stud for use with powder-actuated nailers on concrete or for sprayed concrete testing
- Base materials
- Concrete (soft)
- Corrosion protection
- Galvanized zinc coated 5-13 µm
- Environmental Conditions
- Dry indoor
premium
- Description
- Threaded stud for grating and multi-purpose fastenings on steel in mildly corrosive environments
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 1/4 in
- Corrosion protection
- Stainless steel A4(316) or equivalent