Search Results
703
Products for "MT-B-LDP"
Filter
- Description
- Self-drilling screw (zinc-plated carbon steel) with superior corrosion resistance without washer for thick metal-to-metal fastenings (up to 0.5 in)
- Screw head type
- Hexagon head
- Screw drive/recess type
- 5/16 Hexagon
- Collated
- No
- Description
- Self-drilling screw (Kwik-cote coated carbon steel) with washer for light-medium metal-to-metal fastenings (up to 0.22 in)
- Screw drive/recess type
- Hexagon head
- Base materials
- Carbon steel
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor, rural or urban environment with low pollution
- Description
- Self-drilling screw (zinc-plated carbon steel) without washer for thick metal-to-metal fastenings (up to 0.5 in)
- Screw drive/recess type
- 5/16 Hexagon
- Base materials
- Carbon steel
- Environmental Conditions
- Dry indoor
- Description
- Hard-sided carrying case for storing and transporting your Hilti measuring device and its accessories
- Types
- Individual tool cases
- Compatible with
- Measuring devices
- For use with
- PM 40-MG
- Description
- Grease to lubricate chucks for rotary hammers, demolition hammers and breakers
No technical data available
- Description
- Lubricant and corrosion-protection spray
- For use with (tools)
- All DX tools
- Product type
- Cleaning equipment
- Additional Accessory Information
- Cleaning spray for DX tools
- Description
- Premium single nail with steel washer for fastening to concrete using powder-actuated tools
- Base materials
- Concrete (soft), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Outdoor coated (OC) pipe shoe with height and slope adjustability for heavy industrial applications with outer pipe diameters of 217-610 mm (8" to 24")
- Fire resistance ( Yes/No)
- No
- Temperature resistance
- -4 - 572 °F
- Material composition
- Base-plate: S280GD / Modif POSMAC-C, Bows: S235JR - DIN EN 10025, Middle-plate: S235JR - DIN EN 10025, Sliding-plate: PA66 + GF30, Bolt: Steel grade 8.8, Nut: Steel grade 8
- Description
- Multi-voltage, multi-bay charger for Hilti Li-ion batteries (excluding Nuron batteries)
- Battery voltage compatibility
- 22 V, 36 V
- Output power
- 90 W
- Output current
- 4 A
- Description
- Hanger for concealed fastening of façade cladding using mechanical fasteners for rear fixing
- Height
- 63.5 mm
- Length
- 50 mm
- Material composition
- EN AW-6063 T66
- Description
- Hanger for concealed fastening of façade cladding using mechanical fasteners for rear fixing
- Height
- 63.5 mm
- Length
- 50 mm
- Material composition
- EN AW-6063 T66
- Description
- Hanger for concealed fastening of façade cladding using mechanical fastener for rear fixing
- Height
- 63.5 mm
- Length
- 50 mm
- Material composition
- EN AW-6063 T66
- Description
- Hanger for concealed fastening of façade cladding using mechanical fastener for rear fixing
- Height
- 63.5 mm
- Length
- 50 mm
- Material composition
- EN AW-6063 T66
- Description
- Self-drilling hex head screw (zinc-plated) with superior corrosion resistance for fastening sheet metal to steel substructures in exterior applications.
- Screw head type
- Hexagon head
- Screw drive/recess type
- 5/16 Hexagon
- Collated
- No
- Description
- Self-drilling hex head screw (zinc-plated) for fastening sheet metal to steel substructures
- Screw head type
- Hexagon head
- Collated
- No
- Drilling capacity - min (ga)
- 20 ga
- Description
- Platform to simplify the placement of post-drill, cast-in firestop sleeves on corrugated metal decks
No technical data available
- Description
- Installation aid for use with post-drill, cast-in firestop devices for corrugated metal decks
No technical data available
- Description
- Ultimate 12" miter saw blade (305mm) for universal wood cutting, with carbide teeth to cut faster, last longer and increase productivity with cordless miter saws
No technical data available
- Description
- Outdoor coated (OC) pipe shoe with height and slope adjustability for heavy industrial applications with outer pipe diameters of 21-173 mm (1/2" to 6")
- Fire resistance ( Yes/No)
- No
- Temperature resistance
- -4 - 572 °F
- Material composition
- Base-plate: S280GD / Modif POSMAC-C, Bows: S235JR - DIN EN 10025, Middle-plate: S235JR - DIN EN 10025, Sliding-plate: PA66 + GF30, Bolt: Steel grade 8.8, Nut: Steel grade 8
- Description
- Outdoor coated (OC) pipe shoe with height and slope adjustability for heavy industrial applications with outer pipe diameters of 21-328 mm (1/2" to 12")
- Fire resistance ( Yes/No)
- No
- Temperature resistance
- -4 - 572 °F
- Material composition
- Base-plate: S280GD / Modif POSMAC-C, Bows: S235JR - DIN EN 10025, Middle-plate: S235JR - DIN EN 10025, Sliding-plate: PA66 + GF30, Bolt: Steel grade 8.8, Nut: Steel grade 8
- Description
- Self-drilling screw (zinc-plated carbon steel) without washer for light-medium gauge metal-to-metal fastenings (up to 0.22 in)
- Screw drive/recess type
- 5/16 Hexagon, 3/8 Hexagon
- Base materials
- Carbon steel
- Environmental Conditions
- Dry indoor
- Description
- Pole tool for use with the GX 120 gas nailer
- For use with (tools)
- GX 120, GX 120-ME
- Pole tool length
- 23.03 in
- Description
- 16 Nm torque tool for installing S-BT threaded screw-in studs on steel (thickness < 6 mm)
No technical data available
- Description
- Pipe shoe with weldable pipe interface and height and slope adjustability in heavy industrial applications with outer pipe diameters of 21-328 mm (1/2" to 12")
- Fire resistance ( Yes/No)
- No
- Temperature resistance
- -4 - 572 °F
- Material composition
- Base-plate: S280GD / Modif POSMAC-C, Middle-plate: S235JR - DIN EN 10025, Sliding-plate: PA66 + GF30, Bolt: Steel grade 8.8, Nut: Steel grade 8
- Description
- Rails and rail accessories for Hilti wall saws
- Accessory type
- Other
- For use with
- DST 10-CA, DST 20-CA, DS TS20-E
- Description
- One-step firestop cast-in sleeve for metal pipe penetrations through corrugated metal deck slabs
- Application temperature range
- 23 - 122 °F
- Product Class
- Ultimate
- Description
- One-step firestop cast-in sleeve for plastic pipe penetrations through corrugated metal deck slabs
- Application temperature range
- 23 - 122 °F
- Product Class
- Ultimate
- Description
- Ultimate-performance push-to-connect long plate cast-in-place anchor for concrete on metal deck with approvals
No technical data available
- Description
- Ultimate-performance push-to-connect short plate cast-in-place anchor for concrete on metal deck with approvals
No technical data available
- Description
- Self-drilling screw (A2 stainless steel) with 5/16" washer for thin-medium metal-to-metal fastenings (up to 0.16 inch)
- Screw drive/recess type
- Hexagon 8
- Base materials
- Aluminium, Carbon steel
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor, rural or urban environment with low pollution, Outdoor with moderate concentration of pollution
- Description
- Self-drilling hex head screw (zinc-plated) for fastening sheet metal to steel substructures
- Screw head type
- Hexagon head
- Screw drive/recess type
- 5/16 Hexagon
- Collated
- No
- Description
- Hanger for concealed fastening of façade cladding using self-tapping screws
- Height
- 63.5 mm
- Length
- 50 mm
- Material composition
- Aluminum EN AW-6063 T66
- Description
- Hanger for concealed fastening of façade cladding using self-tapping screws
- Height
- 63.5 mm
- Length
- 40 mm
- Material composition
- Aluminum EN AW-6063 T66
- Description
- Magnetic ground clamp (X-MC F3) and ground cable (X-GC F3) help close the electrical circuit during stud fusion
No technical data available
- Description
- Accessories and replacement parts for the GX 3 gas nailer
- For use with (tools)
- GX 3, GX 3-ME
- Additional Accessory Information
- Fastener guide for GX 3 for ME applications
New
ultimate
- Description
- Ultimate wood fine finish miter saw blade (12” | 305mm) with carbide teeth, for precise and clean cuts in wooden beams with our SM 60-22 cordless miter saw
- Product Class
- Ultimate
New
ultimate
- Description
- Threaded screw-in stud (Stainless Steel, Metric thread) for electrical connections on steel in highly corrosive environments - Recommended maximal cross section of connected cable: 120 mm² / AWG 4.0
- Point type
- Blunt tip
- Base materials
- Steel
- Corrosion protection
- Equivalent corrosion protection as A4(316)
- Description
- Hard-sided carrying case for storing and transporting your Hilti direct fastening tool or nailer and its accessories
- Types
- Individual tool cases
- Compatible with
- Direct fastening tools
- Description
- 5 Nm torque tool for installing S-BT threaded screw-in studs on aluminium or steel (thickness < 6 mm)
No technical data available
- Description
- Ultimate-performance heavy-duty expansion stud anchor with approvals for safety-relevant applications in concrete (carbon steel, external thread)
- Material, corrosion
- Carbon steel, zinc-plated, Zinc plated (min. 5 microns)
- Head configuration
- Externally threaded
- Approvals / Test reports
- ICC-ES report (concrete), LABC, Seismic
- Description
- Hard-sided carrying case for storing and transporting your Hilti circular saw, recip saw, or jigsaw and its accessories
- Types
- Individual tool cases
- Compatible with
- Saws
- Description
- Hard-sided carrying case for storing and transporting your Hilti measuring device and its accessories
- Types
- Individual tool cases
- Compatible with
- Measuring devices
- Description
- Ultimate-performance short plate push-to-connect, cast-in-place anchor with multi-thread for concrete on metal deck with approvals
No technical data available
- Description
- Ultimate-performance long plate push-to-connect, cast-in-place anchor with multi-thread for concrete on metal deck with approvals
No technical data available
- Description
- Self-drilling screw (A2 stainless steel) with 5/16" washer for thick metal-to-metal fastenings (up to 0.59 inch)
- Screw drive/recess type
- Hexagon 8
- Base materials
- Carbon steel, Aluminium
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor, rural or urban environment with low pollution, Outdoor with moderate concentration of pollution
- Description
- Slim stainless steel centering spacer to help position drill bits in grates with openings bigger than 13x18 mm
- Length
- 3.1 in
- Material composition
- Stainless steel
- Description
- High-performance tool-set drop in anchor
- Environmental conditions
- Dry indoor
- Approvals / Test reports
- FM (Factory Mutual), UL (Underwriter Laboratories)
- Material, corrosion
- Carbon steel, zinc-plated
- Description
- Hard-sided carrying case for storing and transporting your Hilti direct fastening tool or nailer and its accessories
- Types
- Individual tool cases
- Compatible with
- Direct fastening tools
- Dimensions (LxWxH)
- 23.6 x 15.7 x 24.1 mm
New
ultimate
- Description
- Threaded screw-in stud (multilayer coated carbon steel - corrosion protection comparable to HDG) for electrical connections on steel in mildly corrosive environments - Recommended maximal cross section of connected cable: 120 mm² / AWG 4.0
- Point type
- Blunt tip
- Base materials
- Steel
- Corrosion protection
- Duplex coating equivalent to 45 µm hot dipped galvanized
- Description
- 16” | 40cm low kickback saw chain with 3/8" | 9.52mm Low Profile™ pitch for the SCN 60-22 cordless chain saw
- Chain Drive Links
- 56
- Bar Length
- 16 in
- Chain Pitch
- 0.37 in
- Description
- 16” | 40cm low kickback saw chain with 3/8" | 9.52mm Low Profile™ pitch for the SCN 60-22 cordless chain saw
- Chain Drive Links
- 56
- Bar Length
- 16 in
- Chain Pitch
- 0.37 in
- Description
- 16” | 40cm narrow kerf bar for use with 3/8" | 9.52mm Low Profile™ chains on the SCN 60-22 cordless chain saw
- Chain Drive Links
- 56
- Bar Length
- 16 in
- Chain Pitch
- 0.37 in
- Description
- 16” | 40cm narrow kerf bar for use with 3/8" | 9.52mm Low Profile™ chains on the SCN 60-22 cordless chain saw
- Chain Drive Links
- 56
- Bar Length
- 16 in
- Chain Pitch
- 0.37 in
- Description
- Ultimate-performance injectable hybrid mortar with approvals for fastening in all masonry materials
- Base materials
- Masonry (grout-filled CMU), Masonry (hollow), Masonry (multi wythe brick/unreinforced masonry), Masonry (solid)
- Base material condition (as per approval)
- Dry, Wet
- Approvals / Test reports
- ICC-ES report (masonry), LABC, Seismic
- Description
- Ultimate-performance short drop in anchor for shallow embedments in cracked/uncracked concrete and seismic applications
- Environmental conditions
- Dry indoor
- Approvals / Test reports
- FM (Factory Mutual), Seismic, UL (Underwriter Laboratories)
- Material, corrosion
- Carbon steel, zinc-plated
- Description
- High-performance tool-set short drop in anchor (carbon steel)
- Approvals / Test reports
- FM (Factory Mutual)
- Material, corrosion
- Carbon steel, zinc-plated
- Base materials
- Concrete (uncracked)
- Description
- Stud holders (M6-1/4" - M12-1/2"), designed to be paired with studs for Hilti's cordless stud fusion system
No technical data available
- Description
- Stud holders (M6-1/4" - M12-1/2"), designed to be paired with studs for Hilti's cordless stud fusion system
No technical data available