Search Results
614
Products for "HMH-Nail In"
Filter
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
New
premium
- Description
- Insulation fastener for installing continuous insulation directly to cold-formed steel stud framing without the use of sheathing
- Application
- Rigid Board Insulation
- Insulation material
- Hard board (e.g. XPS, PUR, PIR), Mineral wool
- Base materials
- Steel
- Description
- Spare parts and optional extras for your PC 2-22 pressure cleaner, such as pressure washer lances, nozzles, connectors, hoses, filters, foldable buckets and more
- For use with
- PC 2-22
- Description
- Nuron battery-powered fastening tool for installing cables, conduits and threaded studs to concrete, steel and masonry (max. nail length 24 mm│15/16”)
- Dimensions (LxWxH)
- 18.7 x 5.3 x 11.6 in
- Tool body weight
- 7.6 lb
- Fastener Intake
- Collated
ultimate
- Description
- Plastic cable/conduit clamp with clip-in design and snap-lock for use with collated nails
- Application
- Conduit Fastening
- Material
- Polyamide (PA), Halogen-free, Flame-retardant, UV-resistant (fair)
- For use with (tools)
- BX 4-22, DX 2, DX 351, DX 460, DX 5, DX 6
- Description
- BiM plunge cutting blade for the oscillating multitool, for plunge cuts in nail embedded wood, plastics, and metal
No technical data available
- Description
- Inspection card S-IC BT for S-BT threaded screw-in studs to ensure the correct screw-in depth
No technical data available
Nuron
- Description
- Nuron battery-powered cordless nailer for fastening drywall track and light-duty materials to concrete, steel, and masonry
- Dimensions (LxWxH)
- 18.7 x 5.9 x 15.2 in
- Fastener Intake
- Nails on strip
- Rated voltage
- 21.6 V
premium
- Description
- Ceiling clip without premounted nail
- Application
- Acoustic ceiling
- Base materials
- Concrete, Concrete over metal deck
- Corrosion protection
- Galvanized zinc coated
premium
- Description
- Steel washers for use with nails
- Application
- Water proofing, Fasten plastic, netting, etc., Wire mesh
- For use with (tools)
- BX 3, GX 120, GX 3
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Tripods and measuring rods compatible with rotating lasers
- Additional Accessory Information
- "Imperial (in) and metric (cm) aluminum measuring rod with a maximum adjustable height of 7'11"" (2.41 m).Aluminum is 100% recycled, reducing CO2 by 83%."
- Product information
- Imperial (in) and metric (cm) aluminum measuring rod with a maximum adjustable height of 7'11" (2.41 m)
- Max. Height
- 2400 mm
premium
- Description
- Plastic cable clasp for use with collated nails
- Application
- Cable Fastenings, Conduit Fastening
- Material
- Polyamide (PA)
- For use with (tools)
- BX 3, BX 4-22, DX 351, DX 460, DX 5, DX 6, GX 3
- Description
- Tripods and measuring rods compatible with rotating lasers
- For use with
- PR 2-HS, PR 300-HV2S, PR 30-HVS, PR 30-HVSG, PR 3-HVSG
- Additional Accessory Information
- Imperial (in) telescopic staff with a maximum height of 16' (4.88 m) and scale grid on the front and rear High-grade, fibreglass-reinforced plastic, suitable for outdoor applications
- Product information
- Imperial (in) telescopic staff with a maximum height of 16' (4.88 m) and scale grid on the front and rear High-grade, fibreglass-reinforced plastic, suitable for outdoor applications
ultimate
- Description
- Metal cable/conduit clip for use with collated nails
- Application
- Cable Fastenings, Conduit Fastening
- Material
- Carbon steel
- For use with (tools)
- BX 4-22, DX 2, DX 351, DX 460, DX 5, DX 6
premium
- Description
- Plastic bunched cable holder for use with collated nails
- Application
- Cable Fastenings, Conduit Fastening
- Material
- Polyamide (PA), Halogen-free, Flame-retardant, UV-resistant (fair)
- For use with (tools)
- BX 3, BX 4-22, DX 351, DX 460, DX 5, DX 6, GX 3
premium
- Description
- Plastic cable/conduit tie holder for use with collated nails
- Application
- Cable Fastenings, Conduit Fastening
- Material
- Polyamide (PA)
- For use with (tools)
- BX 3, BX 4-22, DX 351, DX 460, DX 5, DX 6, GX 3
ultimate
- Description
- Plastic cable trunking fastener/universal washer for use with collated nails
- Application
- Conduit Fastening, Cable Fastenings, Piping Connections
- Material
- Halogen-free
- For use with (tools)
- BX 3, BX 4-22, DX 351, DX 460, DX 5, DX 6, GX 120, GX 3
ultimate
- Description
- Metal cable/conduit standoff clamp with screw closing for use with collated nails
- Application
- Conduit Fastening
- Material
- Carbon steel
- For use with (tools)
- BX 3, BX 4-22, DX 351, DX 460, DX 5, DX 6, GX 120, GX 3
- Description
- Soft washer for use with collated nails to attach waterproofing membrane to concrete or masonry
- Application
- Water proofing
- For use with (tools)
- BX 3, DX 351, DX 460, DX 5, DX 6, GX 120, GX 3
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor temporary applications
- Description
- Soft washer for use with collated nails to attach waterproofing membrane to concrete or masonry
- Application
- Water proofing
- For use with (tools)
- BX 3, DX 351, DX 460, DX 5, DX 6, GX 120, GX 3
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor temporary applications
- Description
- EPDM insulating band for adding galvanic separation and mild acoustic isolation to MP-PS pipe shoes
- Fire resistance ( Yes/No)
- No
- Temperature resistance
- -4 - 212 °F
- Material composition
- EPDM, Self-adhesive layer, Release liner
- Description
- Metal pipe clamp mount with pre-installed threaded stud for light-duty electrical/mechanical fastenings on ceilings and use with collated nails
- Base materials
- Concrete, Steel
- Environmental Conditions
- Dry indoor
- Material
- Carbon steel
- Description
- Ultimate Carbide Wood Hole Saw for cutting wood and nail embedded wood (arbor sold separately)
- Base material
- Wood
- Working mode
- Drilling
- Connection end
- Hex shank, 7/16 in hexagonal
- Description
- BiM segmented saw blade for the oscillating multitool, for sawing nail embedded wood, plastics, and metal
No technical data available
ultimate
- Description
- Metal ceiling clip for light-duty electrical/mechanical fastenings on ceilings and use with collated nails
- Application
- Conduit Fastening, Cable Fastenings, Piping Connections
- Material
- Carbon steel
- For use with (tools)
- BX 3, BX 4-22, DX 351, DX 460, DX 5, DX 6, GX 120, GX 3
ultimate
- Description
- Ultimate X-Change module for coring in all types of masonry
- For use with
- DD 110-D, DD 110-W, DD 130, DD 150-U
- Base materials
- Masonry
- Drilling Mode
- Hand-held, Rig-mounted
- Description
- Heavy-duty internally threaded wedge anchor for flush fastenings in concrete
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Internally threaded
- Base materials
- Concrete (uncracked)
ultimate
- Description
- Ultimate X-Change module for coring in all types of concrete
- For use with
- DD 120, DD 130, DD 150-U, DD 160
- Base materials
- Concrete
- Drilling Mode
- Rig-mounted
- Description
- Powerful SDS Max (TE-Y) demolition hammer for heavy-duty chiseling in concrete and masonry, with Active Vibration Reduction (AVR)
- Working direction
- Wall
- Tool chuck type
- TE-Y (SDS Max)
- Weight according EPTA-Procedure 01/2003 without battery
- 17.4 lb
premium
- Description
- Metal threaded rod hanger for light-duty electrical/mechanical fastenings on ceilings and use with collated nails
- Application
- Suspended systems
- Material
- Carbon steel
- For use with (tools)
- BX 3, BX 4-22, DX 351, DX 460, DX 5, DX 6, GX 120, GX 3
- Description
- Ultimate core bit for coring in all types of concrete – for <2.5 kW tools
- For use with
- DD 120, DD 130, DD 150-U, DD 160
- Base materials
- Concrete
- Drilling Mode
- Rig-mounted
- Description
- Premium core bit for coring in all types of masonry – for <2.5 kW tools
- For use with
- DD 110-D, DD 110-W, DD 130, DD 150-U
- Base materials
- Masonry
- Drilling Mode
- Hand-held, Rig-mounted
ultimate
- Description
- Ultimate X-Change module for faster, smoother coring in virtually all types of concrete
- For use with
- DD 200, DD 250-CA, DD 350-CA
- Base materials
- Concrete
- Drilling Mode
- Rig-mounted
Nuron
- Description
- Cordless drill driver with higher torque which specializes in demanding applications in wood and other materials
- Maximum torque (Soft / Hard Joint)
- 841 in-lb (soft joint), 1062 in-lb (hard joint)
- No load RPM
- gear 1: 330 rpm; gear 2: 560 rpm; gear 3: 1300 rpm; gear 4: 2230 rpm
- Dimensions (LxWxH)
- 9.4 x 2.6 x 8.7 in
- Description
- Checker plate fastener disc for threaded studs in mildly corrosive environments
- Application
- Grating
- Approvals
- ABS
- For use with (tools)
- BX 3, DX 351
- Description
- Plastic cable clasp optimized for collated nails and compatible with a wide variety of fastening methods and base materials
- Application
- Cable Fastenings, Conduit Fastening, Electrical applications
- For use with (tools)
- BX 3, BX 4-22, GX 120, GX 3
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Steel, Wood, Masonry (hollow clay brick), Masonry (solid clay brick)
- Description
- Metal ceiling clip with preassembled wire for light-duty mechanical/electrical fastenings on ceilings and use with collated nails
- Application
- Acoustic ceiling
- Material
- Carbon steel
- For use with (tools)
- BX 3, BX 4-22, DX 351, DX 460, DX 5, DX 6, GX 120, GX 3
- Description
- Ultimate core bit with X-Change Module for faster, smoother coring in virtually all types of concrete – for ≥2.5 kW tools
- For use with
- DD 200, DD 250-CA, DD 350-CA
- Base materials
- Concrete
- Drilling Mode
- Rig-mounted
- Description
- Fully automatic, high-productivity, powder-actuated tool for marking on cold and hot metal surfaces
- Dimensions (LxWxH)
- 21.5 x 2.2 x 6.5 in
- Weight
- 9.6 lb
- Fastener Intake
- Specialty
- Description
- High-performance internally threaded insert for HVU2 adhesive capsule and injectable adhesive hybrid/epoxy anchors (carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- PROFIS Software
- Yes
- Cleaning procedures
- Automatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air Cleaning, Manual Cleaning
- Description
- High-performance internally threaded insert for HVU2 adhesive capsule and injectable adhesive hybrid/epoxy anchors (316 stainless steel)
- Material, corrosion
- Stainless Steel, 316
- PROFIS Software
- Yes
- Type of fixing
- Pre-fastening
Nuron
- Description
- Cordless 12-Ton crimper for crimping cables up to 750 kcmil │ up to 300 mm² in aluminum and 400 mm² in copper
- Crimping capacity
- 10-400 mm² Al (fine stranded), 10-400 mm² Al (stranded), 10-400 mm² Cu (fine stranded), 10-400 mm² Cu (stranded), 750 kcmil Al, 750 kcmil Cu
- Dimensions (LxWxH)
- 14.6 x 4.1 x 16.6 in
- Battery System
- Nuron
- Description
- Plastic bunched cable holder optimized for collated nails and compatible with a wide variety of fastening methods and base materials
- Application
- Cable Fastenings, Conduit Fastening, Electrical applications
- Material
- High-density polyethylene (HDPE)
- For use with (tools)
- BX 3, BX 4-22, GX 120, GX 3
- Description
- Adjustable conduit clamp optimized for collated nails and compatible with a wide variety fastening methods, base materials, and conduit diameters
- Application
- Electrical applications
- Material
- High-density polyethylene (HDPE)
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry, brick/hollow brick, Steel, Wood
- Description
- Setting tools and accessories for the Kwik-Con + and Kwik-Con II+ screw anchors
- Material, corrosion
- N/A
- Head configuration
- N/A
- Material composition
- N/A
ultimate
- Description
- Ultimate core bit for coring in all types of concrete – for use with the DD EC-1 and DD 30-W (incl. Hilti C+ quick-release connection end)
- For use with
- DD 30-W
- Base materials
- Concrete
- Drilling Mode
- Hand-held, Rig-mounted
- Description
- Efficient concrete scanner to locate embedded objects in multiple layers
- Max. detection depth for object localization
- 12 in
- Accuracy of depth indication
- <4 in: ±0.5 in;>4 in: ±15 %
- Localization accuracy
- ±10 mm
- Description
- Lightweight, compact corded drill driver for applications in metal and wood
- Chuck clamping range
- 1/32 - 13/32 in
- No load RPM
- gear 1: 3200 rpm
- Maximum torque (Soft / Hard Joint)
- 106 in-lb (soft joint)
- Description
- Cordless diamond coring machine for handheld or rig-based coring from 52-162 mm (2 - 6-3/8") in concrete or up to 252mm (10”) in masonry (Nuron battery)
- Diameter range
- 2-1/16 - 6-3/8 in
- Base material
- Masonry, Asphalt, Concrete, Reinforced concrete, Wood
- Operation mode
- Hand-held and rig-mounted drilling system
- Description
- Cast-in accessory to allow the installation of a single-stack waste pipe aerator system
No technical data available
- Description
- Concrete detector for rebar localization, depth measurement and size estimation in structural analysis
- Max. detection depth for object localization
- 8 in
- Accuracy of depth indication
- 1% +/-3mm
- Localization accuracy
- 1% +/-3mm mm
- Description
- Efficient concrete scanner for structural analysis and to locate embedded objects in multiple layers
- Max. detection depth for object localization
- 12 in
- Accuracy of depth indication
- <100 mm: ±10 mm, >100 mm: ±15 %
- Localization accuracy
- ±10 mm
- Description
- Robust SDS Max (TE-Y) demolition hammer for light-duty chiseling in concrete and masonry
- Working direction
- Wall
- Tool chuck type
- TE-Y (SDS Max)
- Weight according EPTA-Procedure 01/2003 without battery
- 10.8 lb
- Description
- Very powerful SDS Max (TE-Y) rotary hammer for heavy-duty drilling and chiseling in concrete
- Weight according EPTA-Procedure 01/2003 without battery
- 22 lb
- Single impact energy
- 10.7 ft-lbs
- Hammer drilling diameter range
- 15/32 - 5-29/32 in
- Description
- Self-drilling screw (Kwik-cote coated carbon steel) with washer for light-medium metal-to-metal fastenings (up to 0.22 in)
- Screw drive/recess type
- Hexagon head
- Base materials
- Carbon steel
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor, rural or urban environment with low pollution
- Description
- Very powerful TE-S demolition hammer for heavy-duty chiseling in concrete, with Active Vibration Reduction (AVR)
- Working direction
- Wall, Floor
- Tool chuck type
- TE-S
- Weight according EPTA-Procedure 01/2003 without battery
- 23.4 lb
- Description
- Transit frames for fitting modules to seal existing cable/pipe penetrations in concrete walls and floors
- Temperature resistance range
- -40 - 122 °F
- Free from
- Halogen (halogen content <= 0.1 weight %)
Nuron
- Description
- Steel drilling and driving tool for predrilling accurate holes and installing S-BT screw-in studs (Nuron battery platform)
- RPM
- 2000 rpm
- Max. torque
- 752.3 in-lbf
- Chuck type
- Keyless chuck
- Description
- Versatile SDS Max (TE-Y) demolition hammer for light-duty chiseling in concrete and masonry, with Active Vibration Reduction (AVR)
- Working direction
- Wall
- Tool chuck type
- TE-Y (SDS Max)
- Weight according EPTA-Procedure 01/2003 without battery
- 13.9 lb
Nuron
- Description
- Compact brushless impact driver optimized for more reliable and efficient non-structural fastening in wood and metal (Nuron battery platform)
- Feature
- LED light around the chuck
- Chuck type
- 1/4" hexagonal click-in
- No load RPM
- gear 1: 3000 rpm