Search Results
811
Products for "6-22 impact driver"
Filter
premium
- Description
- Clips for suspending drop ceilings from concrete, metal deck or steel
- Application
- Acoustic ceiling
- Base materials
- Concrete, Metal, Steel
- Product Class
- Premium
- Description
- Helps reduce the spread of flames and smoke in residential type V-B and commercial non-rated construction
- Foam Yield (up to)
- 1.6 ft³
- Approx. tack free time (at 74°F / 50% rel. humidity)
- 12 min
- Approx. cut time (at 23°C / 50% rel. Humidity)
- 25 min
New
ultimate
- Description
- Ultimate core bit for hand-held and rig-based core drilling in virtually all types of concrete and masonry – core bit for cordless core drills
- For use with
- DD 150-U-22
- Base materials
- Concrete, Masonry
- Drilling Mode
- Hand-held and rig-mounted
New
ultimate
- Description
- Stainless steel threaded studs for use with Hilti Stud Fusion
- Base materials
- Carbon steel
- Corrosion protection
- Stainless steel A5
- Environmental Conditions
- Outdoor, areas with heavy industrial pollution
- Description
- Single nail (stainless steel) for fastening to concrete and steel using powder-actuated nailers in corrosive environments
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Steel
- Minimum thickness of base material (steel)
- 3/16 in
- Corrosion protection
- Stainless steel A4(316) or equivalent
- Description
- Economical sleeve anchor (Phillips flat head)
- Head configuration
- Countersunk Phillips
- Environmental conditions
- Indoor, dry conditions
- Approvals / Test reports
- N/A
ultimate
- Description
- Ultimate-performance Zirconium cut-off wheel for precise, low-vibration metalwork using an angle grinder – recommended for stainless steel
- Base material
- Steel, Stainless steel
- Arbor size
- 7/8 in
- Tool type
- Angle grinder
New
ultimate
- Description
- Stainless steel threaded studs for use with Hilti Stud Fusion, including sealing washer and safety flange nut
- Base materials
- Carbon steel
- Corrosion protection
- Stainless steel A5
- Environmental Conditions
- Outdoor, areas with heavy industrial pollution
- Description
- DD-CE connection end, threaded barrel bits
- Base materials
- Concrete
- Drilling Mode
- N/A
- Wet or dry operation
- Wet
- Description
- Collated exterior sheathing screw (corrosion-resistant coating) for SD-M 1 or SD-M 2 for fastening exterior sheathing boards to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- One-step firestop cast-in solution for pipe floor penetrations
- LEED VOC
- 0.19 g/l
- W-rating
- Yes, with W-rating module
- Application temperature range
- 23 - 122 °F
- Description
- Self-drilling screw (Kwik-cote coated carbon steel) without washer for heavy gauge metal-to-metal fastenings (up to 0.5 in)
- Screw drive/recess type
- 5/16 Hexagon
- Base materials
- Carbon steel
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor, rural or urban environment with low pollution
- Description
- Threaded core bit barrel crowns
- Base materials
- Concrete
- Wet or dry operation
- Wet
- Connection end
- BS (1-1/4 in)
- Description
- Connectors and U-Bolts for attaching single pipe runs to vertical MT box profiles
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Single wood screw (zinc-plated) for fastening untreated wood to metal
- Screw head type
- Wafer head
- Screw drive/recess type
- PH #3
- Collated
- No
- Description
- Premium SDS Max (TE-Y) hammer drill bit for high drilling performance in reinforced concrete (fractional)
- Connection end
- TE-Y (SDS Max)
- Base material
- Reinforced concrete, Concrete, Masonry, Brick, Limestone
- Working mode
- Hammer drilling
- Description
- Ultimate SDS Max (TE-Y) hollow hammer drill bit for virtually dust-free drilling in concrete
- Connection end
- TE-Y (SDS Max)
- Base material
- Reinforced concrete, Concrete
- Head shape
- Multi Cutter
- Description
- SDS Max (TE-Y) bell-shaped hammer drill bit for drilling into concrete and masonry
- Connection end
- TE-Y (SDS Max)
- Base material
- Concrete, Masonry, Brick, Limestone
- Working mode
- Hammer drilling
- Description
- Ultimate-performance heavy-duty wedge anchor with approvals for flush-mount fastenings in concrete (carbon steel, countersunk)
- Material, corrosion
- Zinc plated (min. 5 microns)
- Head configuration
- Countersunk
- Approvals / Test reports
- ICC-ES report (concrete), LABC, Seismic
- Description
- Ultimate-performance removable heavy-duty wedge anchor with approvals for fire, seismic and cracked concrete (A4 stainless steel, countersunk)
- Material, corrosion
- Stainless steel, A4
- Head configuration
- Countersunk
- Approvals / Test reports
- BZS/shock, ETA, Fire, ICC-ES report (concrete)
- Description
- Adjustable conduit clamp optimized for collated nails and compatible with a wide variety fastening methods, base materials, and conduit diameters
- Application
- Electrical applications
- Material
- High-density polyethylene (HDPE)
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry, brick/hollow brick, Steel, Wood
premium
- Description
- Premium core bit for faster, smoother coring in virtually all types of concrete – for ≥2.5 kW tools
- For use with
- DD 200, DD 250-CA, DD 350-CA
- Base materials
- Concrete
- Drilling Mode
- Rig-mounted
- Description
- Ultimate core bit with X-Change Module for faster, smoother coring in virtually all types of concrete – for ≥2.5 kW tools
- For use with
- DD 200, DD 250-CA, DD 350-CA
- Base materials
- Concrete
- Drilling Mode
- Rig-mounted
- Description
- Rigid strut clamp with angled top for attaching tubing and pipes to strut channels
- Material composition
- Carbon steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Ultimate-performance heavy-duty wedge anchor with approvals for safety-relevant applications in concrete (carbon steel, hex head)
- Material, corrosion
- Carbon steel, zinc-plated, Zinc plated (min. 5 microns)
- Head configuration
- Hex head
- Approvals / Test reports
- ICC-ES report (concrete), LABC, Seismic
- Description
- Heavy-duty box profile for use with MT-TFB components in outdoor environments
- Material composition
- S350 or better steel
- Surface finish
- Outdoor Coated - ZM
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- High-performance injectable epoxy mortar with everyday approvals for anchoring and rebar connections in concrete
- Base materials
- Concrete (cracked), Concrete (uncracked)
- Base material condition (as per approval)
- Dry, Submerged, Water-filled, Wet
- Approvals / Test reports
- ICC-ES report (concrete)
- Description
- SDS Plus undercut tool for creating the undercut for HDA anchors where rebars are hit
- Material, corrosion
- N/A
- Head configuration
- N/A
- Approvals / Test reports
- N/A
ultimate
- Description
- Single nail for fastening shear connectors to steel structures using the DX 76 powder-actuated nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 1/4 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Stud- or surface-mounted gangplate to increase the capacity of firestop speed sleeves and simplify cable management
- Maximum wall thickness
- 300
- Product Class
- Ultimate
- Application temperature range
- 23 - 122 °F
- Description
- Ultimate-performance injectable hybrid mortar with approvals for fastening in all masonry materials
- Base materials
- Masonry (grout-filled CMU), Masonry (hollow), Masonry (multi wythe brick/unreinforced masonry), Masonry (solid)
- Base material condition (as per approval)
- Dry, Wet
- Approvals / Test reports
- ICC-ES report (masonry), LABC, Seismic
premium
- Description
- Collated nails for fastening to concrete and other base materials using the GX 2 gas nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Connectors and coated U-Bolts for attaching single pipe runs on vertical MT box profiles
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
premium
- Description
- Single nail for fastening to concrete and steel using powder-actuated nailers
- Base materials
- Concrete (soft), Concrete (tough), Steel
- Minimum thickness of base material (concrete)
- 80 mm
- Minimum thickness of base material (steel)
- 1/4 in
- Description
- Small dia. extended length core bits (5/8"-11) & (1-1/4"-7)
- Base materials
- Concrete
- Drilling Mode
- Rig-mounted
- Wet or dry operation
- Wet
- Description
- High-performance injectable hybrid mortar for anchoring in concrete and for rebar connections
- Base materials
- Concrete (cracked), Concrete (uncracked), Masonry (grout-filled CMU)
- Base material condition (as per approval)
- Dry, Wet
- Approvals / Test reports
- ICC-ES report (concrete)
ultimate
- Description
- Super Premium diamond silent blade reduces noise by up to 50% – designed for cutting masonry
- Tool type
- Bench saws
- Base material
- Concrete, Masonry, Natural stone
- Arbor size
- 1 in
premium
- Description
- Premium diamond silent blade reduces noise by up to 50% – designed for cutting masonry
- Tool type
- Bench saws
- Base material
- Concrete, Masonry, Natural stone
- Arbor size
- 1 in
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
No technical data available
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- For use with
- DST 20-CA
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
No technical data available
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
No technical data available
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
No technical data available
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
No technical data available
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
No technical data available
- Description
- Economical coil anchor for temporary fastening in concrete (carbon steel, hex head)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Hex head
- Base materials
- Concrete (uncracked)
premium
- Description
- Collated nails for fastening to concrete and steel using powder-actuated nailers
- Base materials
- Concrete (soft), Concrete (tough), Steel
- Minimum thickness of base material (concrete)
- 80 mm
- Minimum thickness of base material (steel)
- 1/4 in
- Description
- Hot-dip galvanized (HDG) beam clamp for connecting MQ strut channels directly to steel beams
- Material composition
- Claw plate: S235JR - DIN EN 10025, U-bolt: S235JRG2 - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Galvanized beam clamp for connecting MQ strut channels directly to steel beams
- Material composition
- Claw plate: S235JR - DIN EN 10025, U-bolt: S235JRG2 - DIN EN 10025, Nut - DIN 50961
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- High-performance anchor rod for HVU2 adhesive capsules and injectable adhesive hybrid/epoxy mortars (304 stainless steel)
- Material, corrosion
- Stainless Steel, 304
- Base materials
- Concrete (cracked), Concrete (uncracked), Masonry (hollow), Masonry (solid)
- PROFIS Software
- Yes
- Description
- Universal fire caulk, providing a flexible firestop seal for fire-rated joints and through penetrations
- LEED VOC
- 49.5 g/l
- Base materials
- Concrete, Masonry, Drywall
- Application temperature range
- 35 - 104 °F
- Description
- Stainless steel (A4) channel foot for fastening channels to various base materials
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Hot-dip galvanized (HDG) flat washer corresponding to ISO 7089
- Material composition
- Steel - DIN EN ISO 7089
- Surface finish
- Outdoor Coated - HDG
- Load range
- Light duty
- Description
- Standard core bit for coring in all types of concrete – for all tools
- For use with
- DD 130, DD 150-U, DD 160, DD 200, DD 250-CA, DD 350-CA
- Base materials
- Concrete
- Drilling Mode
- Rig-mounted
- Description
- High-performance wedge anchor with everyday approvals for uncracked concrete (hot-dip galvanized)
- Material, corrosion
- Carbon steel, HDG (Hot-Dip Galvanized)/Sherardized
- Head configuration
- Externally threaded
- Approvals / Test reports
- ICC-ES report (concrete)
- Description
- Charging adapter for 12V batteries on C4/36 chargers
- Charger compatibility
- C 4/36-90, C 4/36-350, C4/36-DC, C 4/36-MC4, C 4/36, RC 4/36, RC 4/36-DAB
- Dimensions (LxWxH)
- 5.3 x 3.7 x 2.1 in
- Weight
- 0.4 lb
- Description
- Low-pressure foam for air-sealing, filling and insulating doors and windows without warping the frames or jambs
- Foam Yield (up to)
- 1.3 ft³
- Approx. tack free time (at 74°F / 50% rel. humidity)
- 10 min
- Approx. cut time (at 23°C / 50% rel. Humidity)
- 20 min
premium
- Description
- Steel washers for use with nails
- Application
- Water proofing, Fasten plastic, netting, etc., Wire mesh
- For use with (tools)
- BX 3, GX 120, GX 3
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Ultimate-performance injectable epoxy mortar with approvals for rebar connections and heavy-duty anchoring
- Base materials
- Concrete (cracked), Concrete (uncracked)
- Base material condition (as per approval)
- Dry, Submerged, Water-filled, Wet
- Approvals / Test reports
- Fire, ICC-ES report (concrete), Seismic
standard
- Description
- Collated nails for fastening to concrete and other base materials using the GX 2 gas nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm