Search Results
799
Products for "6-22 impact driver"
Filter
New
premium
- Description
- Premium band saw blade for low-noise cold cutting through metal and plastic
- Base material
- Metal, Steel, Stainless steel, Non-ferrous metal, Plastic
- Product Class
- Premium
premium
- Description
- High-performance thin cut-off wheel with depressed center for cutting stainless/carbon steel using an angle grinder
- Base material
- Steel, Stainless steel
- Arbor size
- 7/8 in
- Tool type
- Angle grinder
- Description
- Single drywall screw (zinc-plated) for fastening drywall boards to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- No
- Description
- Economical nail-in anchor (carbon steel)
- Head configuration
- Rounded head
- Environmental conditions
- Indoor, dry conditions
- Approvals / Test reports
- N/A
- Description
- Light-duty basic profile for use in indoor environments
- Material composition
- S280 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Single exterior sheathing screw (corrosion-resistant coating) for fastening into metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- No
- Description
- Premium SDS Plus (TE-C) hammer drill bit with 2-flute helix for drilling anchor holes into concrete
- Connection end
- TE-C (SDS Plus)
- Base material
- Brick, Concrete, Masonry, Natural stone, Sand-lime block
- Working mode
- Hammer drilling
- Description
- Standard-performance screwdriver bit for soft joint applications
- Connection end
- 1/4 in Hex shank
premium
- Description
- Ultra-robust TE-S shanks for connecting tamping plates and bushing heads to a compatible breaker
- Connection end
- TE-S
- Application
- Compacting, Rod and stake driving, Surface preparation
- Product Class
- Premium
- Description
- Insert shaft for setting anchor rods with HVU adhesive capsules (HVA anchoring system)
No technical data available
- Description
- Light-duty basic profile for use in outdoor environments
- Material composition
- S280 or better steel
- Surface finish
- Outdoor Coated - ZM
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Medium-duty unslotted double C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280GD
- Surface finish
- Indoor Coated - Pre-galvanized
- Material thickness
- 2.75 mm
ultimate
- Description
- Ultimate-performance collated nails for fastening to concrete and other base materials using powder-actuated tools
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Medium-duty double C-Channel profile for use with MT-FL/MT-TL components in outdoor environments
- Material composition
- S280GD
- Surface finish
- Outdoor Coated - ZM
- Material thickness
- 2.75 mm
- Description
- Collated nails for fastening metal decks to bar joists with stand-up powder-actuated nailers
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 1/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
ultimate
- Description
- Spade bit set for fast drilling of shallow holes in wood
- Connection end
- 1/4 in hexagonal
- Base material
- Wood, Wood composites
- Working length
- 100 mm
- Description
- Ultimate diamond cup wheel for the DG/DGH 150 diamond grinder – for removing thin coatings such as paint and adhesive
- Tool type
- Concrete grinder DG/DGH 150
- Base material
- Coatings, Adhesive, Paint, Epoxy
- Product Class
- Ultimate
- Description
- Ultimate diamond cup wheel for the DG/DGH 150 diamond grinder – for removing thick coatings such as epoxy
- Tool type
- Concrete grinder DG/DGH 150
- Base material
- Polyurethane, Epoxy, Plastic
- Product Class
- Ultimate
- Description
- Economical plastic insulation anchor for fastening hard insulating materials to concrete and masonry
- Base materials
- Masonry (solid), Masonry (hollow), Concrete (tough)
- Working principle
- Impact anchor
- Insulation material
- Mineral wool, Soft board (e.g. EPS), Hard board (e.g. XPS, PUR, PIR)
- Description
- Self-drilling screws (Kwik-cote coated carbon steel) without washer for medium-thick metal-to-metal fastenings (up to 0.25 in)
- Base materials
- Carbon steel
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor, rural or urban environment with low pollution
- Product Class
- Premium
- Description
- Ultimate diamond cup wheel for the DG/DGH 150 diamond grinder – for finishing grinding concrete and natural stone
- Tool type
- Concrete grinder DG/DGH 150
- Base material
- Concrete, Natural stone
- Product Class
- Ultimate
- Description
- Bimetal reciprocating saw blades for cutting metal, wood and other materials
- Product Class
- Standard
- Shank
- 1/2 in universal shank
- Teeth per inch
- 10-14
- Description
- Ultimate SDS Plus (TE-C) hammer drill bit for anchor drilling into reinforced concrete (imperial)
- Connection end
- TE-C (SDS Plus)
- Base material
- Reinforced concrete, Concrete, Brick, Masonry
- Working mode
- Hammer drilling
ultimate
- Description
- Ultimate diamond finishing pads for the DGH 130 diamond grinder – for concrete finishing without scratch marks
- Tool type
- Concrete grinder DGH 130
- Base material
- Concrete, Screed, Natural stone
- Product Class
- Ultimate
New
ultimate
- Description
- Ultimate fiber cement saw blade with polycrystalline diamond teeth, to increase performance and last longer when cutting abrasive materials with plunge saws
- Blade features
- Clean cut, Polycrystalline diamond
- Blade diameter
- 6.5 in
- Number of teeth
- 4
New
ultimate
- Description
- Ultimate fine finish circular saw blade with carbide teeth, for smoother and cleaner cuts in solid wood and wooden boards with cordless plunge saws
- Blade features
- Clean cut, Carbide tipped, Fine finish, Long life, Plunge cut, Straight cut, Ultra thin kerf technology
- Blade diameter
- 6-1/2 in
- Number of teeth
- 56
- Description
- Single wood screw (phosphate-coated) for fastening wood trim and base to studs
- Screw head type
- Flat head
- Screw drive/recess type
- Square
- Collated
- No
- Description
- Single wood screw (ceramic coated) for fastening wood to wood
- Screw head type
- Countersunk
- Screw drive/recess type
- PH #2
- Collated
- No
New
ultimate
- Description
- Top-performance circular plunge saw blade for wood, with carbide teeth to cut faster, last longer and maximize your productivity with cordless plunge saws
- Blade features
- Special for cordless, Long life, Ultra thin kerf technology, Carbide tipped
- Blade diameter
- 6.5 in
- Number of teeth
- 24
- Description
- Single wood screw (zinc-plated) for fastening wood trim and base to studs
- Screw head type
- Countersunk
- Screw drive/recess type
- Square
- Collated
- No
- Description
- Single wood screw (phosphate-coated) for fastening wood trim and base to studs
- Screw head type
- Flat head
- Screw drive/recess type
- Square
- Collated
- No
- Description
- Galvanized channel foot for fastening MQ channels to concrete
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanized
- Material thickness
- Channel connector: 4 mm, baseplate: 6 mm
- Description
- Easy-to-install speed lock clevis hanger for pipes
- Material composition
- Carbon steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Electrogalvanized threaded rod
- Material composition
- Carbon steel - AISI 1008, A36
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
ultimate
- Description
- Single nail for fastening metal elements to steel structures with powder-actuated tools
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 1/4 in
- Environmental Conditions
- Dry indoor
premium
- Description
- Self-sharpening SDS Plus (TE-C) tile chisels for scraping away surface materials
- Connection end
- TE-C (SDS Plus)
- Application
- Tile removal
- Product Class
- Premium
premium
- Description
- Premium HSS ground drill bit for drilling small holes in metal, DIN 338 compliant
- Product Class
- Premium
- Connection end
- Smooth shank
- Material composition
- HSS M2
standard
- Description
- Premium collated nails for fastening to concrete and other base materials using the BX 3 cordless nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Profile for attaching the panel to the window
- Height
- 45 mm
- Width
- 30 mm
- Length
- 6000 mm
- Description
- Intumescent, flexible firestop wrap strip to help create a fire and smoke barrier around combustible pipe penetrations
- Base materials
- Concrete, Masonry, Gypsum
- LEED VOC
- 7.6 g/l
- Expansion ratio (unrestricted, up to)
- 1:19
- Description
- Single winged self-drilling reamer for fastening untreated wood to metal
- Screw drive/recess type
- Phillips head
- Base materials
- Carbon steel
- Environmental Conditions
- Dry indoor
- Description
- Modular, versatile accessories to adapt CP 680 firestop cast-in devices for use in virtually any slab
No technical data available
- Description
- Ultimate diamond blade engineered to last longer and maximize cuts-per-charge and cutting speed with battery-powered cut-off saws in a variety of base materials
- Tool type
- Battery cut-off saw
- Base material
- Masonry, Natural stone, Concrete, Concrete (reinforced)
- Product Class
- Ultimate
New
premium
- Description
- Premium diamond blade engineered to maximize your cuts-per-charge and cutting speed with battery-powered cut-off saws, in a wide range of base materials
- Tool type
- Battery cut-off saw
- Base material
- Concrete, Concrete (reinforced), Masonry, Natural stone
- Product Class
- Premium
- Description
- Heavy-duty bimetal reciprocating saw blades for cutting metal, wood and other materials
- Product Class
- Premium
- Shank
- 1/2 in universal shank
- Teeth per inch
- 10-14
- Description
- Ultimate-performance anchor rod for injectable hybrid anchors (carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- Base materials
- Concrete (cracked), Concrete (uncracked)
- PROFIS Software
- Yes
- Description
- Firestop Preformed solution for top-of-wall drywall joints – eliminates the need for slow, messy caulk
- Approvals
- UL 2079
- Length
- 120.5 in
- Application
- Joints
- Description
- Reusable intumescent firestop solution for permanent or temporary cable openings in walls and floors
- Approx. Density
- 0.27 g/cm³
- LEED VOC
- 4.9 g/l
- Storage and transportation temperature range
- 23 - 104 °F
- Description
- Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- Standard-performance bit holder with magnet for use with regular screwdrivers
- Connection end
- 1/4 in Hex shank
- Description
- Medium-duty double C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280GD
- Surface finish
- Indoor Coated - Pre-galvanized
- Material thickness
- 2 mm
- Description
- Medium-duty double C-Channel profile for use with MT-FL/MT-TL components in outdoor environments
- Material composition
- S280GD
- Surface finish
- Outdoor Coated - ZM
- Material thickness
- 2 mm
- Description
- Arbors with 1/4" HSS Pilot Drill for Hilti Hole Saws
- Base material
- Metal, Wood with nails, Wood, Steel, Plastic
- Working mode
- Drilling
- Connection end
- Hex shank
- Description
- Medium-duty unslotted C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280GD
- Surface finish
- Indoor Coated - Pre-galvanized
- Material thickness
- 2.75 mm
- Description
- Longer-lasting reciprocating saw blade for cutting 3.5-10 mm (1/8 - 7/16") thick metal
- Product Class
- Premium
- Shank
- 1/2 in universal shank
- Teeth per inch
- 14
- Description
- Medium-duty double C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280GD
- Surface finish
- Indoor Coated - Pre-galvanized
- Material thickness
- 2.75 mm
- Description
- Medium-duty double C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280GD
- Surface finish
- Indoor Coated - Pre-galvanized
- Material thickness
- 2.75 mm
- Description
- High performing foil capsule for heavy-duty applications in concrete in combination with HAS-B, HAS-E & HAS-R threaded rods and HIS-N internally threaded rods (sold separately)
- Anchoring elements
- HIS-N internally threaded rods
- Approvals / Test reports
- ICC-ES report (concrete), Seismic
- Base material condition (as per approval)
- Dry, Wet
- Description
- Economical nail-in anchor (stainless steel)
- Head configuration
- Rounded head
- Environmental conditions
- Outdoor
- Approvals / Test reports
- N/A