Search Results
614
Products for "HMH-Nail In"
Filter
New
- Description
- Subcompact-class cordless impact wrench with 3/8” friction ring anvil for economical anchoring and bolting, especially in cramped spaces
- Anvil type
- 3/8" friction ring
- Maximum torque
- 133 ft-lbs (1)
- Full hammering frequency
- 3.988 impacts/minute
- Description
- Cordless 12V reciprocating saw engineered for light-duty demolition and cutting to length, especially in hard-to-reach places
- Base material
- Wood, Metal, Plastic, Drywall, Sandwich panel
- Stroke length
- 5/8 in
- Stroke rate
- 2900 strokes/minute
- Description
- Versatile diamond coring machine for handheld or rig-based coring from 8-162 mm (5/16 - 6-3/8") in diameter
- Diameter range
- 5/16 - 6-3/8 in
- Base material
- Concrete, Reinforced concrete, Asphalt, Masonry
- Operation mode
- Hand-held and rig-mounted drilling system
Nuron
- Description
- Cordless brushless drywall cut-out tool for quick, clean and accurate cuts in board and thin sheet metal (Nuron battery platform)
- Tool body weight
- 3.1 lb
- Base material
- Drywall
- A-weighted emission sound pressure level
- 79 dB (A)
- Description
- Variable speed angle grinder with slide switch for cutting and grinding in metal, concrete, and masonry with discs up to 5”
- Disc diameter
- 127 mm
- No load RPM
- gear 1: 3000 rpm; gear 2: 4000 rpm; gear 3: 5000 rpm; gear 4: 6000 rpm; gear 5: 7500 rpm; gear 6: 9400 rpm
- Trigger type
- Constant on
- Description
- Outdoor rotary laser level with automatic vertical alignment and dual slope dial-in functions for leveling, aligning, grading and squaring tasks
- Accuracy
- ±0.02 in at 33 ft
- Operating range with laser receiver (diameter)
- 7 - 1969 ft
- Laser class
- < 4.85 mW, 620-690 nm, Class 2 (EN 60825), Class II (FDA CFR 21 art. 1040)
- Description
- Compact, light diamond coring machine for wet or dry handheld coring from 16-162 mm (5/8 - 6-3/8") in diameter
- Diameter range
- 5/8 - 6-3/8 in
- Base material
- Concrete, Masonry
- Operation mode
- Hand-held drilling system
- Description
- Compact but powerful diamond coring machine for rig-based concrete coring from 25-202 mm (31/32 - 7-15/16”) in diameter
- Diameter range
- 31/32 - 7-15/16 in
- Drilling stand
- Baseplate dimensions and system weight based on usage of SFL stand
- Base material
- Concrete
- Description
- Our most compact SDS Max (TE-Y) rotary hammer for lightweight comfort and control while drilling or chiseling in concrete, stone, and masonry
- Weight according EPTA-Procedure 01/2003 without battery
- 13.4 lb
- Single impact energy
- 4.4 ft-lbs
- Hammer drilling diameter range
- 15/32 - 3-7/32 in
Nuron
- Description
- Compact-class cordless drill driver with Active Torque Control for everyday drilling and driving, especially in hard-to-reach places (Nuron battery platform)
- Maximum torque (Soft / Hard Joint)
- 314 in-lb (soft joint), 549 in-lb (hard joint)
- No load RPM
- gear 1: 610 rpm; gear 2: 2100 rpm
- Chuck clamping range
- 1/16 - 1/2 in
Nuron
- Description
- Compact-class hammer drill driver with Active Torque Control for everyday drilling and driving, especially in hard-to-reach places (Nuron battery platform)
- Maximum torque (Soft / Hard Joint)
- 314 in-lb (soft joint), 549 in-lb (hard joint)
- No load RPM
- gear 1: 610 rpm; gear 2: 2100 rpm
- Chuck clamping range
- 1/16 - 1/2 in
- Description
- Versatile rear-handle gas saw (70cc) with auto-choke, for cutting up to 5" with 14" blades in concrete, masonry, and metal
- Motor cylinder
- 87 cm³
- Rated power
- 4.2 kW
- Wet or dry operation
- Wet and Dry
- Description
- Powerful rear-handle gas saw (87cc) with auto-choke, for cutting up to 6" with 16" blades in concrete, masonry, and metal
- Motor cylinder
- 87 cm³
- Rated power
- 4.2 kW
- Wet or dry operation
- Wet and Dry
- Description
- Compact dual-mode, pistol-grip SDS Plus (TE-C) rotary hammer – for hammer drilling and rotary-only drilling
- Weight according EPTA-Procedure 01/2003 without battery
- 6 lb
- Optimum Hammer drilling range
- 5/32 - 15/32 in
- Single impact energy
- 1.3 ft-lbs
- Description
- Extremely compact, light and mobile diamond coring machine for rig-based concrete coring from 16-162 mm (5/8 - 6-3/8") in diameter
- Diameter range
- 5/8 - 6-3/8 in
- Base material
- Concrete
- Operation mode
- Rig-based drilling system
- Description
- Powerful 14-amp angle grinder with dead man’s switch for cutting and grinding in metal, concrete, and masonry with discs up to 6”
- Disc diameter
- 152 mm
- No load RPM
- gear 1: 9400 rpm
- Trigger type
- Paddle with deadman
Nuron
- Description
- Compact top-handle battery cut-off saw, for cutting up to 4-3/4" with 12" blades in concrete, masonry, and metal (Nuron battery platform)
- Base materials
- All types of concrete and brick, All types of masonry (hollow brick, limestone, etc), Asphalt, Steel
- Protection class
- IEC Battery operated
- Work environment
- Interior and Exterior
Nuron
- Description
- Versatile rear-handle battery cut-off saw, for cutting up to 4-3/4" with 12" blades in concrete, masonry, and metal (Nuron battery platform)
- Base materials
- All types of concrete and brick, All types of masonry (hollow brick, limestone, etc), Asphalt, Steel, Masonry
- Protection class
- IEC Battery operated
- Work environment
- Interior and Exterior
- Description
- Compact top-handle gas saw (63cc) with blade brake, for cutting up to 4-3/4" with 12" blades in concrete, masonry, and metal
- Motor cylinder
- 63.3 cm³
- Rated power
- 3.2 kW
- Wet or dry operation
- Wet and Dry
- Description
- Powerful corded angle grinder with dead man’s switch for cutting and grinding in metal, concrete, and masonry with discs up to 5” (14-amp)
- Disc diameter
- 127 mm
- No load RPM
- gear 1: 9400 rpm
- Trigger type
- Paddle with deadman
- Description
- Powerful 14-amp angle grinder with variable speed and slide switch, for cutting and grinding in metal, concrete, and masonry with discs up to 6”
- Disc diameter
- 152 mm
- No load RPM
- gear 1: 3000 rpm; gear 2: 4000 rpm; gear 3: 5000 rpm; gear 4: 6000 rpm; gear 5: 7500 rpm; gear 6: 9400 rpm
- Trigger type
- Constant on
Nuron
- Description
- Compact and cordless SDS Max (TE-Y) rotary hammer drill with lighter weight, more power and less vibration for drilling and chiseling in concrete (Nuron battery)
- Weight according EPTA-Procedure 01/2003 without battery
- 12.1 lb
- Optimum Hammer drilling range
- 5/8 - 1-3/8 in
- Hammer drilling diameter range
- 15/32 - 3-7/32 in
Nuron
- Description
- Cordless circular saw with maximized run time per charge for fast, straight cuts in wood up to 57 mm│2-1/4” depth (Nuron battery platform)
- Max. cutting depth
- 2.24 in
- Blade diameter
- 6.5 in
- Base material
- Wood
Nuron
- Description
- Powerful and cordless SDS Max (TE-Y) rotary hammer with high power-to-weight ratio for heavy-duty drilling and chiseling in concrete and masonry (Nuron battery)
- Weight according EPTA-Procedure 01/2003 without battery
- 14.1 lb
- Optimum Hammer drilling range
- 23/32 - 1-9/16 in
- Single impact energy
- 6.5 ft-lbs
- Description
- Compact, light diamond coring machine for wet, handheld coring of heavy-duty anchor and rebar holes from 8-35 mm (5/16 - 1-3/8") in diameter
- Diameter range
- 5/16 - 1-3/8 in
- Base material
- Concrete, Masonry
- Operation mode
- Hand-held and rig-mounted drilling system
Nuron
- Description
- Precision plunge circular saw with high dust capture rate for clean and controlled, straight cuts in wood up to 53 mm│2-1/8” depth with guiderail
- Max. cutting depth
- 2.24 in
- Blade diameter
- 6-1/2 in
- Base material
- Drywall, Fibre board, Fibre cement board, Gypsum board, Hardwood (beech, oak etc.), Laminated board, Plastic, Plexiglass, Plywood, Softwood (fir, pine etc.), Wood, Wood composites
- Description
- Powerful dust extractor with built-in power outlet for connection with power tools and jobsite clean ups (wet & dry), 4 gallon tank - OSHA compliant with 150 CFM
- Water capacity
- 2 gal (US)
- Container capacity
- 15 l
- Dust capacity
- 33 lb
- Description
- Powerful dust extractor with built-in power outlet for connection with power tools and jobsite clean ups (wet & dry), 4 gallon tank - OSHA compliant with 150 CFM
- Max. Vacuum
- 3.55 psi
- Water capacity
- 2.4 gal (US)
- Container capacity
- 15 l
- Description
- Powerful dust extractor with built-in power outlet for connection with power tools and jobsite clean ups (wet & dry), 8 gallon tank - OSHA compliant with 150 CFM
- Max. Vacuum
- 3.55 psi
- Water capacity
- 6 gal (US)
- Container capacity
- 30 l
- Description
- Subcompact-class 12V multi-head cordless drill driver (offset, right-angle, 13 mm keyless and hex bit holder) for installation work in tight spaces and around corners
- Maximum torque (Soft / Hard Joint)
- 186 in-lb (soft joint), 301 in-lb (hard joint)
- No load RPM
- gear 1: 400 rpm; gear 2: 1600 rpm
- Number of gears
- 2
Nuron
- Description
- Cordless double cut shear for fast cuts in sheet metal and profiles up to 2.5 mm│12 Gauge - with Hilti SSH CS blades included (Nuron battery platform)
- Material type
- Flat sheet, C.L.U. profile
- Rated voltage
- 21.6 V
- Tool body weight
- 4.9 lb
- Description
- Robust interior rotary laser level with highly visible green beam and automatic functions for leveling, aligning, sloping and squaring (Nuron platform)
- Accuracy
- ±0.06 in at 100 ft
- Laser class
- < 4.85 mW, 510-530 nm, Class 2 (EN 60825), Class II (FDA CFR 21 art. 1040)
- Self leveling range at room temperature
- ±5(±8.7%) °
- Description
- Heavy-duty diamond coring machine with high-frequency motor and optional auto-feed unit for rig-based coring from 52-500 mm (2-1/16 - 19-11/16”) in diameter
- Diameter range
- 2-1/16 - 19-11/16 in
- Base material
- Concrete, Reinforced concrete
- Operation mode
- Rig-based drilling system
Nuron
- Description
- Cordless double cut shears for fast cuts in spiral and ventilation ducts up to 4 x 0.9 mm│20 Gauge - with Hilti SSH CD blades included (Nuron battery platform)
- Material type
- Flat sheet, C.L.U. profile
- Rated voltage
- 21.6 V
- Tool body weight
- 4.9 lb
Nuron
- Description
- Cordless circular saw with pre-mounted 190 mm | 7-1/4” blade, for precise cuts up to 70 mm│2-3/4" in wood and wood-based panels (Nuron battery platform)
- Max. cutting depth
- 2.76 in
- Base material
- Wood
- Guiding rail compatibility
- Yes
- Description
- Three-phase heavy-duty diamond coring machine with high-frequency motor and optional auto-feed unit for rig-based concrete coring from 82-600 mm (3-7/32 - 23-5/8”) in diameter
- Diameter range
- 3-7/32 - 23-5/8 in
- Base material
- Concrete, Reinforced concrete
- Operation mode
- Rig-based drilling system
- Description
- Plug seal for sealing single cables/pipes in round penetrations
- Temperature resistance range
- -40 - 122 °F
- Free from
- Halogen (halogen content <= 0.1 weight %)
- Reaction to fire class (EN 13501-1)
- E
- Description
- 1000W heavy-duty compact reciprocating saw with keyless blade clamp
- Base material
- Metal, Wood
- Stroke length
- 1-1/4 in
- Stroke rate
- 2800 strokes/minute
New
- Description
- Accessory for cordless impact wrenches to automate fastener pre-tensioning in line with approvals (Nuron battery platform)
- Weight according EPTA-Procedure 01/2003 without battery
- 0.5 lb
- Description
- Self-drilling hex head screw (zinc-plated) for fastening sheet metal to steel substructures
- Screw head type
- Hexagon head
- Screw drive/recess type
- 5/16 Hexagon
- Collated
- No
- Description
- Self-drilling screw (A2 stainless steel) with 5/16" washer for fastening steel and aluminum to wood (up to 0.08 inch)
- Screw drive/recess type
- Hexagon 8
- Base materials
- Wood
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor, rural or urban environment with low pollution, Outdoor with moderate concentration of pollution
Nuron
- Description
- Cordless portable band saw inc. 14/18 TPI blade for precise, low-noise, low-spark cuts through metal up to 63.5 mm│2-1/2” cutting depth (Nuron battery platform)
- Base material
- Metal, Stainless steel
- Description
- Silicone insulating band for adding galvanic separation and mild acoustic isolation to MP-PS pipe shoes
- Fire resistance ( Yes/No)
- No
- Temperature resistance
- -4 - 410 °F
- Material composition
- Silicone, Self-adhesive layer, Release liner
- Description
- Glass fiber insulating band for adding galvanic separation to MP-PS pipe shoes
- Fire resistance ( Yes/No)
- No
- Temperature resistance
- -4 - 932 °F
- Material composition
- Texturized E-Glass fiber, Self-adhesive layer
- Description
- Ultimate screw anchor for quicker and more economical fastening of threaded rod to concrete (carbon steel, internally threaded)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Internally threaded
- Approvals / Test reports
- FM (Factory Mutual), ICC-ES report (concrete), LABC, Seismic
- Description
- Cordless pistol-grip copper and aluminum cable cutter with high cutting capacity up to 3.3" / 85 mm diameter
No technical data available
- Description
- Versatile, high-performance screw anchor for concrete and masonry (carbon steel, hex head with Torx®)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Hex head
- Approvals / Test reports
- Miami Dade County
- Description
- Self-drilling screw (A2 stainless steel) with 5/16" washer for thin-medium metal-to-metal fastenings (up to 0.16 inch)
- Screw drive/recess type
- Hexagon 8
- Base materials
- Aluminium, Carbon steel
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor, rural or urban environment with low pollution, Outdoor with moderate concentration of pollution
- Description
- Self-drilling screw (A2 stainless steel) without washer for DBV (drained & back-ventilated) rainscreen façade installation (up to 0.16 inch)
- Screw drive/recess type
- Hexagon 8
- Base materials
- Aluminium
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor, rural or urban environment with low pollution, Outdoor with moderate concentration of pollution
- Description
- Online Li-ion battery training with practical knowledge about safety features and risks of cordless power tool batteries, and certificate for course completion
- Target Group
- Workers, Operators, Installers, Foremen, Site managers, HSE Managers, Management, Warehouse manager and selected employees, Owners
- Language
- English, German, Polish, Romanian, Turkish, French, Spanish, Portuguese, Dutch, Slovene, Swedish
- Duration
- 45 minutes
- Description
- Versatile, high-performance screw anchor for concrete and masonry (carbon steel, Phillips countersunk flat head)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Countersunk Phillips
- Approvals / Test reports
- Miami Dade County
- Description
- Self-drilling screw (Kwik-cote coated carbon steel) without washer for heavy gauge metal-to-metal fastenings (up to 0.5 in)
- Screw drive/recess type
- 5/16 Hexagon
- Base materials
- Carbon steel
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor, rural or urban environment with low pollution
- Description
- Self-drilling screw (zinc-plated carbon steel) without washer for thick metal-to-metal fastenings (up to 0.5 in)
- Screw drive/recess type
- 5/16 Hexagon
- Base materials
- Carbon steel
- Environmental Conditions
- Dry indoor
- Description
- Versatile breaker for demolishing or chiseling floors and occasional wall applications (with universal power cord)
- Working direction
- Floor, Wall
- Tool chuck type
- TE-S
- Weight according EPTA-Procedure 01/2003 without battery
- 27.6 lb
- Description
- Robust laser meter with smart measuring functions and Bluetooth® connectivity for interior applications up to 100 m / 330 ft
- Measuring range
- 2 in - 328 ft
- Measurement accuracy
- 1.5 mm
- Measuring functions
- Single and continuous measurement
- Description
- Accessories for use with the BX 3-IF cordless nailer optimized for interior finishing applications
- For use with (tools)
- BX 3-IF, BX 3-ME (02)
- Additional Accessory Information
- Fastener guide for Interior Finishing for BX 3
- Description
- Marking head for the DX 462 powder-actuated tool used for marking on cold and hot metal surfaces
- Application
- Marking cold steel, Marking hot steel
- Base materials
- Steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Description
- Self-drilling hex head screw (zinc-plated) with superior corrosion resistance for fastening sheet metal to steel substructures in exterior applications.
- Screw head type
- Hexagon head
- Screw drive/recess type
- 5/16 Hexagon
- Collated
- No
- Description
- Self-drilling screw (zinc-plated carbon steel) with superior corrosion resistance without washer for thick metal-to-metal fastenings (up to 0.5 in)
- Screw head type
- Hexagon head
- Screw drive/recess type
- 5/16 Hexagon
- Collated
- No