Search Results
793 Products for "6-22 impact driver"
Filter
- Description
- Self-Feed Bits designed for fast drilling of deep holes in wood
No technical data available
- Description
- DS-BF Cured Concrete Floor saw Blades
- Tool type
- Hydraulic Hand Saw
- Base material
- Concrete
- Wet or dry operation
- Wet
- Description
- Ultimate screw anchor for quicker and more economical fastenings to concrete and grout-filled CMU (carbon steel, hex head)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Hex head
- Approvals / Test reports
- ICC-ES report (concrete), ICC-ES report (masonry), LABC, Seismic
- Description
- Versatile wall bracket for installing rainscreen façade substructures
- Material composition
- EN AW-6063 T66
- Insulation material
- Polypropylene
- Thickness Insulation Material
- 0.24 in
- Description
- Horizontal fiberglass bracket - Large
- Material composition
- Polyamide, EN AW-6063 T66
- Width
- 62 mm
- Height
- 150 mm
- Description
- Versatile wall bracket for installing rainscreen façade substructures
- Material composition
- EN AW-6063 T66
- Insulation material
- Polypropylene
- Thickness Insulation Material
- 0.24 in
- Description
- Sharp-tipped, wide letter and number characters for stamping identification markings onto metal
- Application
- Marking cold steel, Marking hot steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Character type
- Sharp
- Description
- Round-tipped, wide letter and number characters for stamping identification markings onto metal
- Application
- Marking cold steel, Marking hot steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Character type
- Low stress
- Description
- High-performance anchor rod for adhesive capsules and injectable hybrid/epoxy anchors (316 stainless steel)
- Material, corrosion
- Stainless Steel, 316
- PROFIS Software
- Yes
- Cleaning procedures
- Automatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air Cleaning, Manual Cleaning
- Description
- Standard hand setting tools for short embedment drop-in anchors (HDI-P/HDI-P TZ)
No technical data available
- Description
- High-performance wedge anchor with everyday approvals for uncracked concrete (304 stainless steel)
- Material, corrosion
- Stainless Steel, 304
- Head configuration
- Externally threaded
- Approvals / Test reports
- ICC-ES report (concrete), LABC, Miami Dade County, Nuclear (NQA-1)
- Description
- Torque tool for use with new-generation X-BT threaded studs
No technical data available
- Description
- High-performance anchor rod for injectable adhesive mortars and adhesive HVU2 capsule (carbon steel, ASTM F1554 grade 105, zinc-plated)
- Material, corrosion
- Carbon steel, zinc-plated
- Base materials
- Concrete (cracked), Concrete (uncracked), Masonry (hollow), Masonry (solid)
- PROFIS Software
- Yes
- Description
- Accessory for vacuum cleaners
- Accessory type
- Hoses
- For use with
- VC 125-6, VC 125-9, VC 150-10 G01, VC 150-10 G02, VC 150-6 G01, VC 150-6 G02, VC 5
- Product information
- Antistatic hose
- Description
- Serrated cast-in anchor channels with upgraded load capacity and multiple embedment depths for economical fastening of curtain wall façades
- Material, corrosion
- Carbon Steel, Hot-Dip Galvanized
- PROFIS Software
- Yes
- Product type
- Anchor channel
- Description
- DS-BF Asphalt Floor Saw Blade (HNA)
- Tool type
- Floor saw
- Base material
- Asphalt
- Arbor size
- 1 in
- Description
- High-performance anchor rod for injectable hybrid/epoxy anchors (carbon steel, ASTM F1554 grade 36, hot-dip galvanized)
- Material, corrosion
- Carbon steel, HDG (Hot-Dip Galvanized)/Sherardized
- Base materials
- Concrete (cracked), Concrete (uncracked), Masonry (hollow), Masonry (solid)
- PROFIS Software
- Yes
- Description
- High-performance anchor rod for injectable hybrid/epoxy anchors (carbon steel, ASTM F1554 grade 36, zinc-plated)
- Material, corrosion
- Carbon steel, zinc-plated
- Base materials
- Concrete (cracked), Concrete (uncracked), Masonry (hollow), Masonry (solid)
- PROFIS Software
- Yes
- Description
- Seal for the DD-WCS water collector system
- Accessory type
- Water collector systems
- For use with
- DD 160, DD 200, DD 250, DD 250-CA, DD 350-CA, DD 500-CA
- Description
- SDS Max (TE-Y) cruciform hammer drill bit for larger-diameter drilling into concrete and masonry
- Base material
- Concrete, Masonry, Brick, Limestone
- Working mode
- Hammer drilling
- Product Class
- Ultimate
- Description
- SDS Max (TE-Y) rotary hammer core bit for cutting holes in concrete
- Connection end
- TE-Y (SDS Max)
- Base material
- Concrete, Brick, Masonry, Limestone
- Working mode
- Hammer drilling, Drilling
New
standard
- Description
- Ultra-robust SDS Max (TE-Y) pointed chisel bits for chipping/breaking up concrete and masonry
- Connection end
- TE-Y (SDS Max)
- Product Class
- Standard
New
standard
- Description
- Ultra-robust SDS Max (TE-Y) flat chisel bits for chipping/channeling into concrete and masonry
- Connection end
- TE-Y (SDS Max)
- Width
- 0.9 in
- Product Class
- Standard
- Description
- Ultimate wall saw blade (10kw) for high speed and a long lifetime in reinforced concrete (60H Arbor)
- Base material
- Concrete, Reinforced concrete, Abrasive concrete
- Segment type
- Equidist
- Wet or dry operation
- Wet and Dry
- Description
- BiM plunge cutting blade for the oscillating multitool, for plunge cuts in nail embedded wood, plastics, and metal
No technical data available
- Description
- Ultimate-performance wedge anchor for cracked concrete and seismic (316 stainless steel)
- Material, corrosion
- Stainless Steel, 316
- Head configuration
- Externally threaded
- Approvals / Test reports
- ICC-ES report (concrete), ICC-ES report (masonry), LABC, Nuclear (NQA-1)
- Description
- Ultimate-performance wedge anchor for cracked concrete and seismic (carbon steel)
- Material, corrosion
- Carbon steel, Zinc plated (min. 5 microns)
- Head configuration
- Externally threaded
- Approvals / Test reports
- FM (Factory Mutual), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Nuclear (NQA-1), UL (Underwriter Laboratories)
- Description
- Ultimate-performance wedge anchor for cracked concrete and seismic (304 stainless steel)
- Material, corrosion
- Stainless Steel, 304, Stainless steel, A2
- Head configuration
- Externally threaded
- Approvals / Test reports
- ICC-ES report (concrete), ICC-ES report (masonry), LABC, Nuclear (NQA-1)
- Description
- High-performance wedge anchor for cracked concrete and seismic (carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Externally threaded
- Approvals / Test reports
- FM (Factory Mutual), IAPMO, LABC, UL (Underwriter Laboratories)
- Description
- Premium single nail with steel washer for fastening to concrete using powder-actuated tools
- Base materials
- Concrete (soft), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
premium
- Description
- Single formwork nail for use with powder-actuated tools on concrete
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Steel
- Minimum thickness of base material (concrete)
- 3-1/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Collated formwork nail for use with powder-actuated tools for temporary fixing to concrete
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Steel
- Minimum thickness of base material (concrete)
- 3-1/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Universal fasteners for concrete
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick)
- Minimum thickness of base material (steel)
- 1/4 in
- Corrosion protection
- Galvanized zinc coated <20 µm
standard
- Description
- Mechanically fastened grating fastener
- Application
- Grating
- Approvals
- ITB
- Corrosion protection
- Hot-dip galvanized
- Description
- Soft washer for use with collated nails to attach waterproofing membrane to concrete or masonry
- Application
- Water proofing
- For use with (tools)
- BX 3, DX 351, DX 460, DX 5, DX 6, GX 120, GX 3
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor temporary applications
premium
- Description
- Plastic membrane washer with pre-mounted nail, for attaching waterproofing membrane to concrete or masonry
- Application
- Water proofing
- For use with (tools)
- DX 2, DX 351, DX 460, DX 5, DX 6
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Basket clip with preassembled nail for fastening rebar baskets to road beds
- Material
- Carbon steel
- Color
- Grey
- Application
- Formwork
- Description
- Medium-duty C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Medium-duty C-Channel profile for use with MT-FL/MT-TL components in outdoor environments
- Material composition
- S280 or better steel
- Surface finish
- Outdoor Coated - ZM
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Splice connector with pre-assembled Fast-Lock nut and bolt for coupling MT strut channels end-to-end (MT-40, 50, 60, 40D)
- Material composition
- S235JR, Q235B
- Material and coating
- Carbon steel - indoor coated
- Material thickness
- 4 mm
- Description
- Splice connector with pre-assembled Fast-Lock nut and bolt for coupling MT strut channels end-to-end (MT-40, 50, 60, 40D), for outdoor use with low pollution
- Material composition
- S235JR, Q235B
- Material and coating
- Carbon steel - outdoor coated
- Material thickness
- 4 mm
- Description
- Splice connector for coupling MT strut channels end-to-end (MT-40, 50, 60, 40D)
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Splice connector for coupling MT strut channels end-to-end (MT-40, 50, 60, 40D)
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Splice connector for coupling MT-60 strut channels end-to-end
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Splice connector for coupling MT-60 strut channels end-to-end, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Channel end cap for MT-60 strut channels
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Aluminum bracket for horizontal attachment of wood lathing
- Material composition
- EN AW-6063 T66
- Description
- Profile for closing panel joints
- Width
- 62 mm
- Length
- 2500 mm
- Material composition
- Aluminium
- Description
- Mounting elements for extending façade mounting brackets (Large)
- Height
- 150 mm
- Material composition
- EN AW-6063 T66
- Description
- Mounting elements for extending façade mounting brackets (Medium)
- Height
- 75 mm
- Material composition
- EN AW-6063 T66
- Description
- Mounting elements for extending façade mounting brackets (Small)
- Height
- 50 mm
- Material composition
- EN AW-6063 T66
- Description
- Installation kit for installing glass balustrades and handrails, including HIT-HY 270 mortar, EP foam positioning aids and HIT-RE 60-glass mixer attachments
- Storage and transportation temperature range
- 41 - 77 °F
- Description
- Nozzle accessory for injecting HIT-HY 270 mortar for glass balustrade applications
No technical data available
New
- Description
- Charger for the battery in FX 3-A Stud Fusion units
- Application
- Fastening to steel
- Battery voltage compatibility
- FX 3-A
- Certificates
- CE
- Description
- High-pressure gas can for use with the GX 2 and GX-IE gas nailers
- For use with (tools)
- GX 2, GX-IE, GX-IE XL
- Substances contained
- 1-buthene, propene, propane, polyglycol
- Storage temperature - min.
- 41 °F
- Description
- Hard-sided carrying case for storing and transporting your Hilti measuring device and its accessories
- Types
- Individual tool cases
- Compatible with
- Measuring devices
- For use with
- PM 20-CG, PM 20-CG 12V, PM 20-CGE, PM 2-L, PM 2-LG, PM 2-P, PMP 45
- Description
- Hard-sided carrying case for storing and transporting your Hilti measuring device and its accessories
- Types
- Individual tool cases
- Compatible with
- Measuring devices
- Description
- Hard-sided carrying case for storing and transporting your Hilti rotary hammer and its accessories
- Types
- Individual tool cases
- Compatible with
- Rotary hammers
- Dimensions (LxWxH)
- 23.2 x 5.9 x 18.1 mm
- Description
- Hard-sided carrying case for storing and transporting your Hilti rotary hammer and its accessories
- Types
- Individual tool cases
- Compatible with
- Rotary hammers
- Dimensions (LxWxH)
- 24 x 5.5 x 18.9 mm
- Description
- Soft tool bag for storing and transporting your Hilti measuring device and its accessories
- Types
- Bags and pouches
- Compatible with
- Optical tools
- For use with
- POS 150, POS 180