Nails
Browse all single and collated nails for use with battery-, gas- or powder-actuated fastening tools here
46 Products
Filter
New
premium
- Description
- High-performance collated nails for fastening to concrete and other base materials using the BX 4 cordless nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Environmental Conditions
- Dry indoor
- Description
- Ultimate-performance collated nails for fastening to concrete and other base materials using the BX 3 cordless nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Ultimate-performance collated nails for fastening to concrete and other base materials using the GX 3 gas nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Minimum thickness of base material (steel)
- 3/16 in
New
standard
- Description
- Premium collated nails for fastening to concrete and other base materials using the BX 4 cordless nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Environmental Conditions
- Dry indoor
standard
- Description
- Premium collated nails for fastening to concrete and other base materials using the BX 3 cordless nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
standard
- Description
- Premium collated nails for fastening to concrete and other base materials using the GX 3 gas nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
New
ultimate
- Description
- Ultimate-performance collated nails for fastening to steel using the BX 4 cordless nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 5/32 in
- Environmental Conditions
- Dry indoor
ultimate
- Description
- Ultimate-performance collated nails for fastening to steel using the BX 3 cordless nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 3/16 in
- Corrosion protection
- Galvanized zinc coated <20 µm
premium
- Description
- Ultimate-performance collated nails for fastening to steel using the GX 3 gas nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 3/16 in
- Corrosion protection
- Galvanized zinc coated <20 µm
New
premium
- Description
- Premium collated nails for fastening plywood to steel framing using the BX 4 cordless nailer
- Base materials
- Steel
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Environmental Conditions
- Dry indoor
- Description
- Premium collated nails for fastening plywood to steel framing using the GX 3 nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 3/16 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Collated formwork nail for use with powder-actuated tools for temporary fixing to concrete
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Steel
- Minimum thickness of base material (concrete)
- 3-1/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
premium
- Description
- Single formwork nail for use with powder-actuated tools on concrete
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Steel
- Minimum thickness of base material (concrete)
- 3-1/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
standard
- Description
- Premium collated nails for fastening to concrete using powder-actuated tools
- Base materials
- Concrete (soft), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
standard
- Description
- Single nail for fastening to concrete using powder-actuated tools
- Base materials
- Concrete (soft), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Premium single nail with steel washer for fastening to concrete using powder-actuated tools
- Base materials
- Concrete (soft), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
ultimate
- Description
- Ultimate-performance collated nails for fastening to concrete and other base materials using powder-actuated tools
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
ultimate
- Description
- Ultimate-performance single nail for fastening to concrete and other base materials using powder-actuated tools
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Single nail with steel washer for use with powder actuated tools on concrete
- Base materials
- Concrete (soft), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
premium
- Description
- Single nails with washer for sill plate attachment on concrete using powder-actuated tools
- Base materials
- Concrete (soft)
- Minimum thickness of base material (concrete)
- 80 mm
- Environmental Conditions
- Dry indoor
- Description
- High-performance collated nails for fastening to concrete and steel using powder-actuated tools
- Base materials
- Concrete (soft), Concrete (tough), Steel
- Minimum thickness of base material (concrete)
- 80 mm
- Minimum thickness of base material (steel)
- 1/4 in
premium
- Description
- High-performance single nail for fastening to concrete and steel using powder-actuated tools
- Base materials
- Concrete (soft), Concrete (tough), Steel
- Minimum thickness of base material (concrete)
- 80 mm
- Minimum thickness of base material (steel)
- 1/4 in
- Description
- High-performance single nail with steel washer for fastening to concrete and steel using powder-actuated tools
- Base materials
- Concrete (soft), Concrete (tough), Steel
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
premium
- Description
- Single nail for fastening to steel using powder-actuated tools
- Base materials
- Steel
- Minimum thickness of base material (concrete)
- 80 mm
- Minimum thickness of base material (steel)
- 1/4 in
- Description
- Ultimate-performance collated nails for fastening to steel using powder-actuated tools
- Base materials
- Steel
- Minimum thickness of base material (concrete)
- 80 mm
- Minimum thickness of base material (steel)
- 1/4 in
premium
- Description
- Ultimate-performance collated drywall nail for fastening to steel using powder-actuated tools
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 1/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
ultimate
- Description
- Ultimate-performance single drywall nail for fastening to steel using powder-actuated tools
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 1/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Collated nails for fastening metal decks to bar joists with stand-up powder-actuated nailers
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 1/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Collated nails for fastening metal decks to steel structures with stand-up powder-actuated nailers
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 1/4 in
- Corrosion protection
- Galvanized zinc coated <20 µm
ultimate
- Description
- Single nail for fastening metal decks to steel structures with powder-actuated nailers
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 1/4 in
- Corrosion protection
- Galvanized zinc coated <20 µm
ultimate
- Description
- Single nail for fastening shear connectors to steel structures with powder-actuated nailers
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 1/4 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Single nail for use with powder actuated tools on steel and concrete in corrosive environments
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Steel
- Minimum thickness of base material (steel)
- 3/16 in
- Corrosion protection
- Stainless steel A4(316) or equivalent
- Description
- Single nail for use with powder actuated tools on steel in corrosive environments
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Steel
- Minimum thickness of base material (steel)
- 1/4 in
- Corrosion protection
- Stainless steel A4(316) or equivalent
- Description
- Stainless steel single nail with steel washer for use with powder-actuated nailers on steel and concrete in corrosive environments
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Steel
- Minimum thickness of base material (steel)
- 1/4 in
- Corrosion protection
- Stainless steel A4(316) or equivalent
ultimate
- Description
- High-performance single nail for use with powder actuated tools on steel in corrosive environments
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 3/16 in
- Corrosion protection
- Stainless steel A4(316) or equivalent
ultimate
- Description
- Single nail for fastening metal elements to steel structures with powder-actuated tools
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 1/4 in
- Environmental Conditions
- Dry indoor
- Description
- Universal fasteners for concrete
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick)
- Minimum thickness of base material (steel)
- 1/4 in
- Corrosion protection
- Galvanized zinc coated <20 µm
premium
- Description
- Ultimate-performance single nail for use with the BX 3 cordless nailer on concrete and other base materials
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Ultimate-performance collated nails for fastening to concrete and other base materials using the GX 2 gas nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
standard
- Description
- Premium collated nails for fastening to concrete and other base materials using the GX 2 gas nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Premium-performance collated nails for fastening to steel using the GX 2 gas nailer
- Base materials
- Steel
- Environmental Conditions
- Dry indoor
- For use with (tools)
- GX 2
premium
- Description
- Premium collated nails for fastening plywood to steel framing using the GX 2 gas nailer
- Base materials
- Steel
- Corrosion protection
- Galvanized zinc coated <20 µm
- Environmental Conditions
- Dry indoor
- Description
- Ultimate-performance collated nails for fastening to concrete and other base materials using the GX 120 gas nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
standard
- Description
- Collated nails for fastening to concrete and other base materials using the GX 120 gas nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
ultimate
- Description
- Ultimate-performance collated nails for fastening to steel using the GX 120 gas nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 3/16 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Premium collated nails for fastening plywood to steel framing using the GX 120 gas nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 3/16 in
- Corrosion protection
- Galvanized zinc coated <20 µm