Search Results
1074
Products for "AG 6D-22"
Filter
- Description
- Medium-duty C-Channel profile for use with MT-FL/MT-TL components in outdoor environments
- Material composition
- S280 or better steel
- Surface finish
- Outdoor Coated - ZM
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
ultimate
- Description
- Collated nail for fastening to concrete and steel using powder-actuated nailers
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Ultimate SDS Max (TE-Y) hammer drill bit for exceptional concrete drilling performance (imperial)
- Connection end
- TE-Y (SDS Max)
- Base material
- Reinforced concrete, Concrete, Masonry, Brick, Limestone
- Working mode
- Hammer drilling
- Description
- Galvanized channel foot for fastening channels to concrete at an angle
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanized
- Material thickness
- 4 mm
- Description
- Ultimate metal cutting disc engineered to maximize your cutting speed and cuts-per-charge with battery-powered cut-off saws
- Base material
- Metal
- Product Class
- Ultimate
- Description
- SDS Plus undercut tool for creating the undercut for HDA anchors where rebars are hit
- Material, corrosion
- N/A
- Head configuration
- N/A
- Approvals / Test reports
- N/A
- Description
- Standard hand setting tools for short embedment drop-in anchors (HDI-P/HDI-P TZ)
No technical data available
- Description
- Helps reduce the spread of flames and smoke in residential type V-B and commercial non-rated construction
- Foam Yield (up to)
- 1.6 ft³
- Approx. tack free time (at 74°F / 50% rel. humidity)
- 12 min
- Approx. cut time (at 23°C / 50% rel. Humidity)
- 25 min
standard
- Description
- Collated nails for fastening to concrete and other base materials using the BX 3 cordless nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Splice connector for coupling MT-60 strut channels end-to-end
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Ultimate-performance through-set undercut anchor for dynamic loads (stainless)
- Material, corrosion
- Stainless steel, A4
- Head configuration
- Externally threaded
- Approvals / Test reports
- ICC-ES report (concrete), LABC, Nuclear (NQA-1), Seismic
- Description
- Ultimate-performance pre-set undercut anchor for dynamic loads (stainless steel)
- Material, corrosion
- Stainless steel, A4
- Head configuration
- Externally threaded
- Approvals / Test reports
- ICC-ES report (concrete), LABC, Nuclear (NQA-1), Seismic
- Description
- Single winged self-drilling reamer for fastening untreated wood to metal
- Screw drive/recess type
- Phillips head
- Base materials
- Carbon steel
- Environmental Conditions
- Dry indoor
- Description
- Channel end cap for MT-60 strut channels
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Cast-in anchor channels with upgraded load capacity and multiple embedment depths for economical fastening of curtain wall façades
- Material, corrosion
- Carbon Steel, Hot-Dip Galvanized
- PROFIS Software
- Yes
- Description
- Ultimate-performance removable heavy-duty wedge anchor with approvals for fire, seismic and cracked concrete (A4 stainless steel, hex head)
- Material, corrosion
- Stainless steel, A4
- Head configuration
- Hex head
- Approvals / Test reports
- ICC-ES report (concrete)
- Description
- Torque tool for use with new-generation X-BT threaded studs
No technical data available
- Description
- Splice connector for coupling MT-60 strut channels end-to-end, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
ultimate
- Description
- Single nail for fastening to steel structures using the DX 76 powder-actuated nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 1/4 in
- Environmental Conditions
- Dry indoor
- Description
- Profile for closing panel joints
- Width
- 62 mm
- Length
- 2500 mm
- Material composition
- Aluminium
- Description
- Basket clip with preassembled nail for fastening rebar baskets to road beds
- Material
- Carbon steel
- Color
- Grey
- Application
- Formwork
- Description
- Standard, flush, and dry flanges for the second generation DST 10-CA wall saw and DST 20-CA 2nd wall saw
No technical data available
- Description
- Continuous bag tank with wheels and push-bar for use with VC-20/40/150-X dust extractors (dry)
- Dust capacity
- 71 lb
- Application
- Cleaning, Drilling and breaking, Wood sawing, Cutting and grinding (light, up to 125 mm / 5 in), Drywall and wood sanding, Socket cutting, Slitting, Cutting and grinding (heavy, above 125 mm / 5 in)
- Power source
- Corded
- Description
- Soft washer for use with collated nails to attach waterproofing membrane to concrete or masonry
- Application
- Water proofing
- For use with (tools)
- BX 3, DX 351, DX 460, DX 5, DX 6, GX 120, GX 3
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor temporary applications
standard
- Description
- Mechanically fastened grating fastener
- Application
- Grating
- Approvals
- ITB
- Corrosion protection
- Hot-dip galvanized
- Description
- Charging adapter for 12V batteries on C4/36 chargers
- Charger compatibility
- C 4/36-90, C 4/36-350, C4/36-DC, C 4/36-MC4, C 4/36, RC 4/36, RC 4/36-DAB
- Dimensions (LxWxH)
- 5.3 x 3.7 x 2.1 in
- Weight
- 0.4 lb
premium
- Description
- Collated nails for fastening to concrete and other base materials using the BX 3 cordless nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Very robust aluminum asset tag with metal wire shackle for tracking tools and equipment exposed to heavy usage
- Dimensions (LxWxH)
- 1 x 0.4 x 1.4 in
- Barcode type
- 2D barcode (Datamatrix ECC200)
- Operating temperature range
- -4 - 149 °F
- Description
- Serrated cast-in anchor channels with upgraded load capacity and multiple embedment depths for economical fastening of curtain wall façades
- Material, corrosion
- Carbon Steel, Hot-Dip Galvanized
- PROFIS Software
- Yes
- Description
- Ultimate-performance through-set undercut anchor for dynamic loads (zinc-plated)
- Material, corrosion
- Zinc plated (min. 5 microns)
- Head configuration
- Externally threaded
- Approvals / Test reports
- ICC-ES report (concrete), LABC, Nuclear (NQA-1), Seismic
- Description
- Ultimate-performance pre-set undercut anchor for dynamic loads (zinc-plated)
- Material, corrosion
- Carbon steel, zinc-plated, Zinc plated (min. 5 microns)
- Head configuration
- Externally threaded
- Approvals / Test reports
- ICC-ES report (concrete), LABC, Nuclear (NQA-1), Seismic
premium
- Description
- Single nail for fastening to concrete and steel using powder-actuated nailers
- Base materials
- Concrete (soft), Concrete (tough), Steel
- Minimum thickness of base material (concrete)
- 80 mm
- Minimum thickness of base material (steel)
- 1/4 in
- Description
- Modules to seal cables within transit frames which penetrate switch cabinets
- Temperature resistance range
- -40 - 122 °F
- Free from
- Halogen (halogen content <= 0.1 weight %)
- Reaction to fire class (EN 13501-1)
- E
- Description
- Screw magazine for collated screws from 1" to 2" long – for interior finishing applications
- Length
- 7.6 in
- Magazine capacity
- 40
- Screw length - min
- 0.98 in
- Description
- Premium core bit for coring in all types of concrete – for ≥2.5 kW tools
- For use with
- DD 200, DD 250-CA, DD 350-CA, DD 500-CA
- Base materials
- Concrete
- Drilling Mode
- Rig-mounted
premium
- Description
- Collated nails for fastening plywood to steel framing using the GX 3 gas nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 3/16 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Firestop Preformed solution for top-of-wall drywall joints – eliminates the need for slow, messy caulk
- Approvals
- UL 2079
- Length
- 120.5 in
- Application
- Joints
premium
- Description
- Single nail for fastening formwork to concrete using powder-actuated nailers
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Steel
- Minimum thickness of base material (concrete)
- 3-1/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Connection end for diamond coring inserts with M24 thread
- Connection end
- BI (Hilti)
premium
- Description
- Collated nails for fastening to concrete and steel using powder-actuated nailers
- Base materials
- Concrete (soft), Concrete (tough), Steel
- Minimum thickness of base material (concrete)
- 80 mm
- Minimum thickness of base material (steel)
- 1/4 in
New
- Description
- Charger for the battery in FX 3-A Stud Fusion units
- Application
- Fastening to steel
- Battery voltage compatibility
- FX 3-A
- Certificates
- CE
- Description
- Ultimate SDS Plus (TE-C) hollow hammer drill bit for virtually dust-free drilling in concrete
- Connection end
- TE-C (SDS Plus)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
premium
- Description
- Collated nail for temporarily fastening formwork to concrete using powder-actuated nailers
- Base materials
- Concrete (soft), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 3-1/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Installation kit for installing glass balustrades and handrails, including HIT-HY 270 mortar, EP foam positioning aids and HIT-RE 60-glass mixer attachments
- Storage and transportation temperature range
- 41 - 77 °F
- Description
- Nozzle accessory for injecting HIT-HY 270 mortar for glass balustrade applications
No technical data available
- Description
- Aluminum bracket for horizontal attachment of wood lathing
- Material composition
- EN AW-6063 T66
standard
- Description
- Collated nail for fastening to concrete using powder-actuated nailers
- Base materials
- Concrete (soft), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Mounting elements for extending façade mounting brackets (Large)
- Height
- 150 mm
- Material composition
- EN AW-6063 T66
- Description
- Mounting elements for extending façade mounting brackets (Medium)
- Height
- 75 mm
- Material composition
- EN AW-6063 T66
- Description
- Mounting elements for extending façade mounting brackets (Small)
- Height
- 50 mm
- Material composition
- EN AW-6063 T66
- Description
- Horizontal aluminum bracket with thermal pad
- Material composition
- EN AW-6063 T66
- Insulation material
- Polypropylene
- Thickness Insulation Material
- 0.2 in
- Description
- Single nail for fastening to concrete and steel using powder-actuated nailers
- Base materials
- Concrete (soft), Concrete (tough), Steel
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
New
premium
- Description
- Collated nails for fastening to concrete and other base materials using the BX 4 cordless nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Environmental Conditions
- Dry indoor
- Description
- Adhesive tape, metal holders, wires, cable binders, or accessory kits for ON!Track equipment management
- Dimensions (LxWxH)
- 9.8 x 0.1 x 0.1 in
- Operating temperature range
- -4 - 113 °F
- Description
- Hot-dip galvanized base connector for fastening MT-70 and MT-80 girders to structural steel in moderately corrosive environments
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 6 mm
- Description
- Autofeed unit to assist the drilling process with rig-based diamond coring systems – for use with the DD 350-CA and DD 500-CA
- For use with
- DD 350-CA, DD 500-CA
- Weight
- 9.92 lb
- Dimensions (LxWxH)
- 14.2 x 7.6 x 5.2 in
- Description
- Chucks and side handles for use with TE-C (SDS Plus) rotary hammers
- For use with
- TE 5-22 G01, TE 6-22, TE 6-CL
- Chuck type
- Angular chuck
- Product information
- Drilling in concrete and masonry
- Description
- Versatile wall bracket for installing rainscreen façade substructures
- Material composition
- Aluminum EN AW-6063 T66
- Insulation material
- Polypropylene
- Thickness Insulation Material
- 0.24 in
- Description
- Elasticated tool tether for better tool drop protection when working at heights
No technical data available
- Description
- Adhesive tape, metal holders, wires, cable binders, or accessory kits for ON!Track equipment management
- Operating temperature range
- -4 - 113 °F