Search Results
651
Products for "HIT-RE 500 V3"
Filter
- Description
- Modular, versatile accessories to adapt CP 680 firestop cast-in sleeves for use in virtually any slab
No technical data available
New
- Description
- Grade 8.8 bolt with hot-dip galvanized square washer used for assembling raised floor systems in moderately corrosive environments
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanized base connector for fastening MT-70 and MT-80 girders to structural steel in moderately corrosive environments
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 6 mm
- Description
- Replacement springs for the TCT Hole Cutters.
- Base material
- n/a
- Description
- Collated .27 caliber Clean-Tec cartridges for use with stand-up powder-actuated nailers for fastening metal decks
- For use with (tools)
- DX 860-HSN, DX 9-HSN
- Cartridge type
- .27 caliber short, 6.8/11 M40
- Approvals
- CE, CIP, PTB
- Description
- High-performance anchor rod for injectable adhesive mortars and HVU adhesive capsule (carbon steel, ASTM F1554 grade 105, hot-dip galvanized)
- Material, corrosion
- Carbon steel, HDG (Hot-Dip Galvanized)/Sherardized
- Base materials
- Concrete (cracked), Concrete (uncracked)
- PROFIS Software
- Yes
- Description
- Rails and rail accessories for Hilti wall saws
No technical data available
- Description
- Accessories for circular saws such as guide rails, clamps and tool cases
No technical data available
- Description
- Replacement parts and optional extras for Hilti cordless nibblers, including dies, punches, guides and cases
- Additional Accessory Information
- For cutting laterally or longitudinally across fluted or corrugated sheet metal.
- Description
- High-performance bit holder with impact zone for use with impact screwdrivers
- Connection end
- 1/4 in Hex shank
- Description
- Heavy-duty adjustable baseplate for connecting an MT girder horizontally between two parallel walls
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- baseplate 8 mm
- Description
- Premium diamond silent blade reduces noise by up to 50% – designed for cutting masonry
- Tool type
- Bench saws
- Base material
- Concrete, Masonry, Natural stone
- Arbor size
- 1 in
- Description
- 45-degree angle bracket for bracing MT-40 and MT-50 strut channel structures
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Universal fire caulk, providing a flexible firestop seal for fire-rated joints and through penetrations
- LEED VOC
- 49.5 g/l
- Base materials
- Concrete, Masonry, Drywall
- Application temperature range
- 35 - 104 °F
- Description
- Super Premium diamond silent blade reduces noise by up to 50% – designed for cutting masonry
- Tool type
- Bench saws
- Base material
- Concrete, Masonry, Natural stone
- Arbor size
- 1 in
- Description
- Ultimate-performance multi-thread, cast-in-place threaded inserts for concrete on wood formwork with approvals
- Approvals / Test reports
- FM (Factory Mutual), ICC-ES report (concrete), LABC, Seismic, UL (Underwriter Laboratories)
- Base materials
- Concrete (cracked), Concrete (lightweight), Concrete (uncracked)
- Material, corrosion
- Carbon steel, zinc-plated
- Description
- Nut setter with non-magnetic / ball-lock screw retention for use with hex-head screws
- Connection end
- 1/4 in Hex shank
- Description
- Online training for the role of Dust Competent Person, with practical knowledge, corrective measures, role responsibilities and certificate for course completion
- Target Group
- HSE Managers, Foremen, Site managers
- Language
- English, Spanish, French
- Duration
- 45 minutes
- Description
- Replacement center drill bits for the TCT Hole Cutters.
- Base material
- Metal, Stainless steel, Sheet Metal, Metal Plate, Carbon steel, Cast iron
- Description
- Manual setting tool for drop-in anchors (HDI-L/HDI/HDI-S/HDV)
No technical data available
- Description
- Manual setting tool for drop-in anchors (HDI-L/HDI/HDI-S/HDV)
No technical data available
- Description
- Manual setting tool for drop-in anchors (HDI-L/HDI/HDI-S/HDV)
No technical data available
- Description
- Adjustable brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Collated cartridges for use with powder actuated nailers
- For use with (tools)
- DX 2, DX 351, DX 351 CT, DX 351 M/E, DX 351 MX 27, DX 351 MX 32, DX 36, DX 450, DX 460 F10, DX 460 F8, DX 460 F8S12, DX 460 FP8, DX 460 GR, DX 460 IE, DX 460 IE-XL, DX 460 MX, DX 460 MX, DX 460 SM, DX 460 SR, DX 462 CM, DX 462 CM, DX 462 F8, DX 462 F8S12, DX 5 F10, DX 5 F8, DX 5 F8S12, DX 5 GR, DX 5 IE, DX 5 IE-XL, DX 5 MX, DX 5 MX, DX 5 SM, DX A40, DX A41
- Cartridge type
- .27 caliber short
- Approvals
- CE, CIP, PTB
- Description
- Splice connector for coupling MT strut channels end-to-end (MT-40, 50, 60, 40D)
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Splice connector for coupling MT strut channels end-to-end (MT-40, 50, 60, 40D)
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Accessory for vacuum cleaners
- For use with
- IC RC
- Product information
- Rubber strap to fix an IC-RM remote control to a vacuum cleaner hose or power tools (pack of 5)
- Description
- Rails and rail accessories for Hilti wall saws
No technical data available
- Description
- Medium-duty C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Collated nail for fastening metal decks to steel structures using the DX 9 powder-actuated nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 1/4 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Medium-duty double C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280GD
- Surface finish
- Indoor Coated - Pre-galvanized
- Material thickness
- 2.75 mm
- Description
- Collated .27 caliber long Clean-Tec cartridges for use with stand-up powder-actuated nailers for fastening metal decks
- For use with (tools)
- DX 860 ENP, DX 9-ENP
- Cartridge type
- .27 caliber long, 6.8/18 M40
- Approvals
- CE, CIP, PTB
- Description
- Single .27 caliber long cartridges for use with powder-actuated nailers
- For use with (tools)
- DX 600N
- Cartridge type
- .27 caliber long single
- Approvals
- CIP
- Description
- 45-degree angle brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Standard hand setting tools for short embedment drop-in anchors (HDI-P/HDI-P TZ)
No technical data available
- Description
- Standard hand setting tools for short embedment drop-in anchors (HDI-P/HDI-P TZ)
No technical data available
- Description
- Accessories for wall saw remote controls, such as extension cords and harness belts
No technical data available
- Description
- Accessories for the DS TS20-E wall saw
No technical data available
- Description
- Speed kit for use with the SDT stand-up handle and SD 5000/4500(-A) screwdrivers for high-speed sidelap fastening
- Screw diameter d
- 0.19 in
- Description
- Speed kit for use with the SDT stand-up handle and SD 5000/4500(-A) screwdrivers for high-speed sidelap fastening
- Screw diameter d
- 0.19 in
- Description
- Remote/receivers and holders for your Hilti PR rotating lasers
- Product information
- Bluetooth® enabled universal rotary laser remote/receiver with IP66 rating, transparent lens for detecting red rotating laser beams up to 800m (2600 ft) and green rotating laser beams up to 300m (980 ft) diameter, digital screen for displaying the offset value, and keypad for triggering automatic functions
- Description
- Ultimate-performance multi-thread long plate cast-in-place anchor for concrete on metal deck with approvals
- Approvals / Test reports
- FM (Factory Mutual), ICC-ES report (concrete), LABC, Seismic, UL (Underwriter Laboratories)
- Base materials
- Concrete (cracked), Concrete (lightweight over metal deck), Concrete (normal-weight over metal deck), Concrete (uncracked)
- Material, corrosion
- Carbon steel, zinc-plated
- Description
- Silicon-based fire caulk, providing a highly flexible firestop seal for construction joints and pipe penetrations
- LEED VOC
- 48 g/l
- Base materials
- Concrete, Masonry, Metal, Gypsum
- Application temperature range
- 35 - 104 °F
- Description
- Medium-duty C-Channel profile for use with MT-FL/MT-TL components in outdoor environments
- Material composition
- S280 or better steel
- Surface finish
- Outdoor Coated - ZM
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Medium-duty unslotted C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280GD
- Surface finish
- Indoor Coated - Pre-galvanized
- Material thickness
- 2.75 mm
- Description
- Clamp for channel-to-channel or channel-to-girder cross-connections with MT strut channel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- 45-degree angle bracket for bracing MT-40 and MT-50 strut channel structures, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Ultimate-performance multi-thread short plate cast-in-place anchor for concrete on metal deck with approvals
- Approvals / Test reports
- FM (Factory Mutual), ICC-ES report (concrete), LABC, Seismic, UL (Underwriter Laboratories)
- Base materials
- Concrete (cracked), Concrete (lightweight over metal deck), Concrete (uncracked)
- Material, corrosion
- Carbon steel, zinc-plated
- Description
- Medium-duty unslotted double C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280GD
- Surface finish
- Indoor Coated - Pre-galvanized
- Material thickness
- 2.75 mm
- Description
- Ceiling clip with ultimate-performance nail and pre-tied wire
- Application
- Acoustic ceiling
- Material
- Carbon steel
- Base materials
- Steel, Concrete (soft), Concrete (tough), Concrete (lightweight over metal deck)
- Description
- Single nail for fastening to steel structures using the DX 76 powder-actuated nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 1/4 in
- Environmental Conditions
- Dry indoor
- Description
- Collated nail for fastening to concrete and steel using powder-actuated nailers
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- High-performance stand-up handle for use with collated decking screws for sidelap and frame fastening
- For use with
- SDT 9
- Screw length - min
- 0.75 in
- Screw length - max
- 1.57 in
- Description
- Tool bags for storing and carrying chisels up to 50 cm (20") long
- Connection end
- TE-S
- Application
- n/a
- For use with
- All Hilti chisels up to length 50cm
- Description
- Single nail for fastening to concrete and steel using powder-actuated nailers
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- High-durability joint sealant spray for general purpose applications
- Base materials
- Concrete, Masonry, Gypsum, Steel, Metal
- Application temperature range
- 39 - 104 °F
- Approx. cure time
- 1.5 mm/day
- Description
- Clamp for channel-to-channel or channel-to-girder cross-connections with MT strut channel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Adjustable brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)