Search Results
1058
Products for "AG 6D-22"
Filter
- Description
- DS-BF Joint Floor Saw Blade
- Tool type
- Floor saw
- Base material
- Concrete
- Wet or dry operation
- Wet
ultimate
- Description
- Ultimate non-woven belts for use with a band file for fine grinding and finishing of stainless steel, steel, aluminum and other metals
- Base material
- Stainless steel, Steel
- Length
- 21 in
- Product Class
- Ultimate
- Description
- Knockout dies for punching ½ - 4” diameter conduit holes in up to 10-gauge steel
No technical data available
- Description
- Economical, multiple-use replacement coils for reusing HCA coil anchors in a new drill hole
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- N/A
- Base materials
- Concrete (uncracked)
- Description
- Support plates to create a stable base for narrow material when fastening with F-BT-MR SN fusion threaded studs
- Application
- Multi-purpose fastening (electrical, mechanical elements and support system fastenings)
- For use with (tools)
- FX 3
- Material composition
- Ultramid® A3WG10
- Description
- Plastic bunched cable holder optimized for collated nails and compatible with a wide variety of fastening methods and base materials
- Application
- Cable Fastenings, Conduit Fastening, Electrical applications
- Material
- High-density polyethylene (HDPE)
- For use with (tools)
- BX 3, GX 120, GX 3
- Description
- Plastic cable clasp optimized for collated nails and compatible with a wide variety of fastening methods and base materials
- Application
- Cable Fastenings, Conduit Fastening, Electrical applications
- For use with (tools)
- BX 3, GX 120, GX 3
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Steel, Wood, Masonry (hollow clay brick), Masonry (solid clay brick)
- Description
- Data cable hook for supporting cable bundles on walls and ceilings, for use with battery-powered nailers on concrete and steel, or with anchors and screws on wood and drywall
- Application
- Conduit Fastening, Cable Fastenings
- Material
- Carbon steel, Polyamide (PA), Flame-retardant, Plenum rated
- Base materials
- Concrete, Steel, Drywall, Wood
- Description
- Data cable hook for supporting cable bundles on walls and ceilings, for use with powder-actuated tools on concrete and steel
- Application
- Cable Fastenings
- Material
- Carbon steel, Polyamide (PA), Flame-retardant, Plenum rated
- Base materials
- Concrete, Steel, Drywall, Wood
- Description
- Data cable hook with batwing clip for supporting cable bundles on a drop rod
- Application
- Conduit Fastening, Cable Fastenings
- Material
- Carbon steel, Polyamide (PA), Flame-retardant, Plenum rated
- Base materials
- Concrete
ultimate
- Description
- Data cable hook for supporting cable bundles on walls or ceilings
- Application
- Conduit Fastening, Cable Fastenings
- Material
- Carbon steel, Polyamide (PA), Flame-retardant, Plenum rated
- Base materials
- Concrete
- Description
- Two-step solution for sealing cable penetrations requiring a sleeved opening
- Surface burning characteristics UL 723 (ASTM E84)
- Flame spread: 10<BR>Smoke development: 15
- LEED VOC
- 4.9 g/l
- Product Class
- Ultimate
- Description
- Intumescent, flexible firestop wrap strip to help create a fire and smoke barrier around combustible pipe penetrations
- Base materials
- Concrete, Masonry, Gypsum
- LEED VOC
- 7.6 g/l
- Expansion ratio (unrestricted, up to)
- 1:19
- Description
- Pre-cut, intumescent, flexible firestop wrap strip to help create a fire and smoke barrier around combustible pipe penetrations
- Base materials
- Concrete, Masonry, Gypsum
- LEED VOC
- 7.6 g/l
- Expansion ratio (unrestricted, up to)
- 1:19
- Description
- BS and UL compliant, FM approved retrofit firestop collar to help create a fire and smoke barrier around existing pipe penetrations
- Base materials
- Concrete, Drywall, Masonry
- LEED VOC
- 7.6 g/l
- Expansion ratio (unrestricted, up to)
- 1:17
- Description
- Retrofit firestop collar with a galvanized steel housing for 8" and 10" pipes
- Base materials
- Concrete, Drywall, Masonry
- LEED VOC
- 7.6 g/l
- Expansion ratio (unrestricted, up to)
- 1:17
- Description
- Easily moldable and reusable firestop putty designed to help create a fire and smoke barrier around cables and metal pipes
- Approx. Density
- 1.6 kg/m³
- Color
- Red
- Surface burning characteristics UL 723 (ASTM E84)
- Flame spread: 15<BR>Smoke development: 10
- Description
- Rigid and fast-curing firestop foam with excellent water resistance to help create a fire, smoke and moisture barrier around cable and mixed penetrations
- Application temperature range
- 50 - 86 °F
- Color
- Red
- Content per can/cartridge
- 300 ml
- Description
- Silicon-based fire caulk, providing a highly flexible firestop seal for construction joints and pipe penetrations
- LEED VOC
- 48 g/l
- Base materials
- Concrete, Masonry, Metal, Gypsum
- Application temperature range
- 35 - 104 °F
- Description
- Easy-to-install flexible firestop foam to help create a fire and smoke barrier around for cable and mixed penetrations
- Approx. cure time
- 10 min
- Application temperature range
- 50 - 95 °F
- Color
- Red
- Description
- Wedge compression kit for quickly and easily forming a tight, effective seal within cable transit frames in potentially explosive atmospheres
- Temperature resistance range
- -40 - 167 °F
- Description
- Anchor plate sets to secure cable modules within a transit frame in potentially explosive atmospheres
- Temperature resistance range
- -4 - 167 °F
- Description
- Cast-in accessory to allow the installation of a single-stack waste pipe aerator system
No technical data available
- Description
- Pre-installed water barrier that meets W-rating requirements for a wide range of penetrants
- W-rating
- Yes
- Description
- Anchor plate sets to secure cable modules within a transit frame and increase pressure-tightness
- Approvals
- UL
- Temperature resistance range
- -40 - 122 °F
- Free from
- Halogen (halogen content <= 0.1 weight %)
- Description
- Wedge compression kit for quickly and easily forming a tight, effective seal within cable transit frames
- Approvals
- UL
- Temperature resistance range
- -40 - 122 °F
- Free from
- Halogen (halogen content <= 0.1 weight %)
- Description
- Node with pre-assembled Fast-Lock nut and bolt for assembling strut channels in a T shape
- Material composition
- S235JR, Q235B
- Material and coating
- Carbon steel - indoor coated
- Material thickness
- 4 mm
- Description
- Node with pre-assembled Fast-Lock nut and bolt for assembling strut channels in a T shape, for outdoor use with low pollution
- Material composition
- S235JR, Q235B
- Material and coating
- Carbon steel - outdoor coated
- Material thickness
- 4 mm
- Description
- Node for assembling strut channels in a T shape
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Node for assembling strut channels in a T shape, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Adjustable angle bracket for assembling strut channels in a T shape
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Adjustable angle bracket for assembling strut channels in a T shape, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Pipe stanchion for connecting pipe saddles to the top of a vertical girder
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Galvanized pre-assembled threaded rod stiffener for attaching strut channel to a threaded rod to accommodate compression loads
- Material composition
- Carbon steel
- Surface finish
- Indoor Coated - Electro galvanized
- Base material type
- Modular Support
- Description
- Electro-galvanized channel connector for joining any modular support elements with a butterfly opening
- Product Class
- Premium
- Material composition
- Bolt: M10 grade 8.8 - DIN ISO 898, Nut: C4C - DIN EN 10263, Plate: S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanized
- Description
- Hot-dip galvanized (HDG) channel connector for joining any elements with a butterfly opening
- Product Class
- Premium
- Tightening torque
- 30 ft-lbf
- Material composition
- Bolt: M10 grade 8.8 - DIN ISO 898, Nut: C4C - DIN EN 10263, Plate: DD11 - DIN EN 10111
- Description
- Packages including flat-rate freight and other time-saving services with a choice of convenient subscription options to fit your business
No technical data available
- Description
- High-pressure gas can for use with the GX 2 and GX-IE gas nailers
- For use with (tools)
- GX 2, GX-IE, GX-IE XL
- Substances contained
- 1-buthene, propene, propane, polyglycol
- Storage temperature - min.
- 41 °F
- Description
- Marking head for the DX 462 powder-actuated tool used for marking on cold and hot metal surfaces
- Application
- Marking cold steel, Marking hot steel
- Base materials
- Steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Description
- Baseplates and baseplate accessories
- Fixation mode
- Vacuum
- Product information
- Vacuum pad for DD-ST 120 and DD-ST 160 drill stands - 566 mm x 73 mm
- Additional Accessory Information
- Vacuum pad for DD-ST 120 and DD-ST 160 drill stands
- Description
- Drill stand for Hilti DD 30-W coring machines
- Fixation mode
- Vacuum
- Column extension
- No
- For use with
- DD 30-W
- Description
- Baseplates and baseplate accessories
- Product information
- Wheel (1 piece) for DD-ST 150 and DD-ST 160 drill stands
- Additional Accessory Information
- Wheel (1 piece) for DD-ST 150 and DD-ST 160 drill stands
- Description
- Baseplates and baseplate accessories
- Fixation mode
- Anchor
- Product information
- Steel base plate for DD-HD 30 drill stands
- Additional Accessory Information
- Alternative anchor base plate made of steel
- Description
- Column extension for Hilti core drill stands
- Column extension
- n/a
- Additional Accessory Information
- Swiveling column allowing access to the hole in deep coring applications with DD 150-U and DD 160
- Product information
- Swiveling column allowing access to the hole in deep coring applications with DD 150-U and DD 160 (useful length: 250mm)
- Description
- Drill stand for Hilti DD 120 coring machines
- Fixation mode
- Anchor, vacuum with add-on vacuum pad
- Angular coring
- Yes
- Column extension
- No
- Description
- Column extension for Hilti core drill stands
- Column extension
- n/a
- Additional Accessory Information
- 30 cm long column extension for DD-HD 30 drill stand, includes eccentric pin.
- Product information
- 30 cm long column extension for DD-HD 30 drill stand
- Description
- Column extension for Hilti core drill stands
- Column extension
- n/a
- Additional Accessory Information
- 100 cm long column extension for DD-HD 30 drill stand, includes eccentric pin.
- Product information
- 100 cm long column extension for DD-HD 30 drill stand
- Description
- Baseplates and baseplate accessories
- Fixation mode
- Vacuum
- Product information
- Vacuum pad for DD-HD 30 drill stand
- Additional Accessory Information
- Vacuum pad for DD-HD 30 drill stand
- Description
- Baseplates and baseplate accessories
- For use with
- DD-HD 30
- Product information
- Set of wheels for DD-HD 30 drill stands
- Additional Accessory Information
- Set of wheels for DD-HD 30 drill stands
- Description
- Baseplates and baseplate accessories
- Fixation mode
- Vacuum
- Product information
- Vacuum pad to drill in pipes with DD-HD 30 drill stands. Can be affixed to pipes with a min. diameter of 300 mm and allows coring holes up to 250 mm diameter.
- Additional Accessory Information
- Vacuum pad to drill in pipes with DD-HD 30 drill stands
- Description
- Drill stand for heavy duty Hilti coring machines (see technical data for tool compatibility)
- Fixation mode
- Anchor, vacuum with add-on vacuum pad
- Angular coring
- Yes
- Column extension
- Yes
- Description
- Drill stand for heavy duty Hilti coring machines (see technical data for tool compatibility)
- Fixation mode
- Anchor, vacuum with add-on vacuum pad
- Angular coring
- Yes
- Column extension
- Yes
- Description
- Drill stand for Hilti DD 160 coring machines
- Fixation mode
- Anchor, vacuum integrated in baseplate
- Angular coring
- Yes
- Column extension
- Yes
- Description
- Drill stand for Hilti DD 160 coring machines
- Fixation mode
- Anchor, vacuum with add-on vacuum pad
- Angular coring
- No
- Column extension
- Yes
- Description
- Drill stand for Hilti DD 120 coring machines
- Fixation mode
- Anchor, vacuum with add-on vacuum pad
- Angular coring
- No
- Column extension
- No
- Description
- Drill stand for Hilti DD 120 coring machines
- Fixation mode
- Anchor, vacuum with add-on vacuum pad
- Angular coring
- No
- Column extension
- No
- Description
- Drill stand for heavy duty Hilti coring machines (see technical data for tool compatibility)
- Angular coring
- Yes
- Column extension
- Yes
- For use with
- DD 250-CA, DD 350-CA, DD 500-CA
- Description
- Drill stand for heavy duty Hilti coring machines (see technical data for tool compatibility)
- Angular coring
- Yes
- Column extension
- Yes
- For use with
- DD 250-CA, DD 350-CA, DD 500-CA
- Description
- Dust removal system and components for cutting with Hilti angle grinders
- Tool type
- Angle grinder
- For use with
- AG 115, AG 450
- Additional Accessory Information
- For use with AG 115 / 450-S, AG 115/ 450 -D
- Description
- Dust removal system and components for grinding with Hilti angle grinders
- For use with
- AG 115, AG 450
- Product information
- For use with AG 115 / 450-S, AG 115/ 450 -D