Search Results
850 Products for "dx 5"
Filter
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- Accessory type
- Flanges
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- Accessory type
- Flanges
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- Accessory type
- Flanges
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- Accessory type
- Flanges
- Description
- Silicone-based sealant providing maximum movement in fire-rated joints and pipe penetrations
- LEED VOC
- 38 g/l
- Base materials
- Concrete, Masonry, Metal
- Application temperature range
- 35 - 104 °F
- Description
- 24" Continuous core bit barrels
- For use with
- DD 200, DD 350-CA, DD 500-CA
- Base materials
- Concrete
- Wet or dry operation
- Wet
- Description
- 48" Continuous core bit barrels
- For use with
- DD 200, DD 350-CA, DD 500-CA
- Base materials
- Concrete
- Wet or dry operation
- Wet
ultimate
- Description
- Data cable hook for supporting cable bundles on walls or ceilings
- Application
- Conduit Fastening, Cable Fastenings
- Material
- Carbon steel, Polyamide (PA), Flame-retardant, Plenum rated
- Base materials
- Concrete
- Description
- Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- Single drywall screw (phosphate-coated) for fastening drywall boards to wood
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- No
- Description
- Easy-to-install speed lock clevis hanger for pipes
- Material composition
- Carbon steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
ultimate
- Description
- Ultimate-performance Zirconium cut-off wheel for precise, low-vibration metalwork using an angle grinder – recommended for stainless steel
- Product Class
- Ultimate
- Base material
- Steel, Stainless steel
- Tool type
- Angle grinder
- Description
- Universal fasteners for concrete
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick)
- Minimum thickness of base material (steel)
- 1/4 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Ultimate SDS Max (TE-Y) hollow hammer drill bit for virtually dust-free drilling in concrete
- Connection end
- TE-Y (SDS Max)
- Base material
- Reinforced concrete, Concrete
- Head shape
- Multi Cutter
ultimate
- Description
- Ultimate X-Change module for faster, smoother coring in virtually all types of concrete
- For use with
- DD 200, DD 250-CA, DD 350-CA
- Base materials
- Concrete
- Drilling Mode
- Rig-mounted
ultimate
- Description
- 1/2" (inch) short impact socket for tightening bolts and anchors
- Connection end
- 1/2 in square
- Short/Long
- Short
- Material coating/plating/finish
- Black phosphate
- Description
- Aircraft extension drill bits are designed for drilling in steel when extra length is required. Each diameter comes in 6" length. Delivery: 2-7 days throughout the U.S., 10-14 days to Canada.
- Connection end
- Smooth shank
New
ultimate
- Description
- Stainless steel threaded studs for use with Hilti Stud Fusion, including sealing washer and safety flange nut
- Base materials
- Carbon steel
- Corrosion protection
- Stainless steel A5
- Environmental Conditions
- Outdoor, areas with heavy industrial pollution
ultimate
- Description
- Ultimate X-Change module for coring in all types of masonry
- For use with
- DD 110-D, DD 110-W, DD 130, DD 150-U
- Base materials
- Masonry
- Drilling Mode
- Hand-held, Rig-mounted
- Description
- Injectable cementitious adhesive anchor for fire-resistant structural rebar connections
- Base materials
- Concrete (cracked), Concrete (uncracked)
- Base material condition (as per approval)
- Dry, Wet
- Approvals / Test reports
- ETA, Fire
- Description
- Economical sleeve anchor (Phillips flat head)
- Head configuration
- Countersunk Phillips
- Environmental conditions
- Indoor, dry conditions
- Approvals / Test reports
- N/A
- Description
- Connectors and U-Bolts for attaching single pipe runs to vertical MT box profiles
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Baseplates and baseplate accessories
- Fixation mode
- Vacuum
- Product information
- Vacuum pad for DD-ST 120 and DD-ST 160 drill stands - 566 mm x 73 mm
- Additional Accessory Information
- Vacuum pad for DD-ST 120 and DD-ST 160 drill stands
- Description
- Single drywall screw (phosphate-coated) for fastening drywall boards to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- No
ultimate
- Description
- 3/4" (inch) long impact sockets for tightening bolts and anchors
- Connection end
- 3/4 in square
- Short/Long
- Long
- Product Class
- Ultimate
- Description
- High-performance tool-set drop in anchor
- Environmental conditions
- Dry indoor
- Approvals / Test reports
- FM (Factory Mutual), UL (Underwriter Laboratories)
- Material, corrosion
- Carbon steel, zinc-plated
ultimate
- Description
- Ultimate HSS cobalt drill bit for drilling in thick metal and stainless steel, DIN 338 compliant (imperial)
- Product Class
- Ultimate
- Connection end
- Smooth shank
- Material composition
- M35 material & 5% cobalt
- Description
- Accessories for use with the TE DRS 4/6 dust removal system
No technical data available
- Description
- Accessories for use with the TE DRS 4/6 dust removal system
No technical data available
- Description
- Tool bags for storing and carrying chisels up to 50 cm (20") long
- Connection end
- TE-S
- Application
- n/a
- For use with
- All Hilti chisels up to length 50cm
- Description
- Carbide tipped rebar cutter with SDS-Plus connection end for use in hammer drills. Use rotation mode only to drill through rebar
No technical data available
- Description
- Tungsten Carbide Teeth Hole Cutters for fast drilling in steel, stainless, and tough alloys.
- Base material
- Metal, Stainless steel, Sheet Metal, Metal Plate, Carbon steel, Cast iron
- Connection end
- Hex shank
- Description
- Ductile metal cutting disc for gas saws
- Base material
- Ductile metal
- Tool type
- Gas saw
- Blade / disc shape
- Type 41
ultimate
- Description
- 1/2" (inch) long impact socket for tightening bolts and anchors
- Connection end
- 1/2 in square
- Short/Long
- Long
- Material coating/plating/finish
- Black phosphate
- Description
- Masonry drill bit for drilling holes primarily in masonry
- Connection end
- Cylindrical
- Base material
- Masonry, Drywall, Light-weight concrete
- Working mode
- Hammer drilling, Drilling only
- Description
- 16” | 40cm narrow kerf bar for use with 3/8" | 9.52mm Low Profile™ chains on the SCN 60-22 cordless chain saw
- Chain Drive Links
- 56
- Bar Length
- 16 in
- Chain Pitch
- 0.37 in
- Description
- 16” | 40cm narrow kerf bar for use with 3/8" | 9.52mm Low Profile™ chains on the SCN 60-22 cordless chain saw
- Chain Drive Links
- 56
- Bar Length
- 16 in
- Chain Pitch
- 0.37 in
- Description
- 16” | 40cm low kickback saw chain with 3/8" | 9.52mm Low Profile™ pitch for the SCN 60-22 cordless chain saw
- Chain Drive Links
- 56
- Bar Length
- 16 in
- Chain Pitch
- 0.37 in
- Description
- 16” | 40cm low kickback saw chain with 3/8" | 9.52mm Low Profile™ pitch for the SCN 60-22 cordless chain saw
- Chain Drive Links
- 56
- Bar Length
- 16 in
- Chain Pitch
- 0.37 in
- Description
- Common jack screw spindle
- Accessory type
- Fastening elements
- Product information
- Accessory to brace DD-ST 150 and DD-ST 160 drill stands
- Additional Accessory Information
- Accessory to brace DD-ST 150 and DD-ST 160 drill stands
- Description
- Baseplates and baseplate accessories
- Product information
- Wheel (1 piece) for DD-ST 150 and DD-ST 160 drill stands
- Additional Accessory Information
- Wheel (1 piece) for DD-ST 150 and DD-ST 160 drill stands
- Description
- Water collector holder for Hilti coring systems
- Accessory type
- Water management systems
- Product information
- Water dam for diameters up to 87 mm
- For use with
- DD 120, DD 150-U, DD 160, DD 200, DD 250, DD 250-CA, DD 350-CA, DD 500-CA
- Description
- Accessory for vacuum cleaners
- Accessory type
- Adapters
- For use with
- VC 125-9, VC 150-6 G01, VC 300-17X
- Product information
- Hose connection for the DG 150, DD 110 & DCH angle connector
- Description
- Accessories
- Accessory type
- Fastening elements
- Product information
- Compact flexible clamping nut
- Additional Accessory Information
- Compact flexible clamping nut
- Description
- General accessories
- Accessory type
- Depth gauges
- Product information
- Depth gauge for DD 150-U and DD 160 drill stands
- Additional Accessory Information
- Depth gauge for DD 150-U and DD 160 drill stands
- Product information
- BT chuck for DD 110-D, DD 100-W and DD 120
- Additional Accessory Information
- BT chuck for DD 110-D, DD 100-W and DD 120
- Product information
- BS chuck for DD 200, DD 350 and DD 500
- Additional Accessory Information
- BS chuck for DD 200, DD 350 and DD 500
premium
- Description
- Single formwork nail for use with powder-actuated tools on concrete
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Steel
- Minimum thickness of base material (concrete)
- 3-1/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- High-performance anchor rod for injectable adhesive mortars and adhesive HVU2 capsule (carbon steel, ASTM F1554 grade 105, zinc-plated)
- Material, corrosion
- Carbon steel, zinc-plated
- Base materials
- Concrete (cracked), Concrete (uncracked), Masonry (hollow), Masonry (solid)
- PROFIS Software
- Yes
- Description
- Ultimate-performance multi-thread, cast-in-place threaded inserts for concrete on wood formwork with approvals
- Approvals / Test reports
- FM (Factory Mutual), ICC-ES report (concrete), LABC, Seismic, UL (Underwriter Laboratories)
- Base materials
- Concrete (cracked), Concrete (lightweight), Concrete (uncracked)
- Material, corrosion
- Carbon steel, zinc-plated
- Description
- Replacement parts and optional extras for Hilti cordless nibblers, including dies, punches, guides and cases
No technical data available
- Description
- Replacement parts and optional extras for Hilti cordless nibblers, including dies, punches, guides and cases
No technical data available
- Description
- Replacement parts and optional extras for Hilti cordless nibblers, including dies, punches, guides and cases
No technical data available
- Description
- Replacement parts and optional extras for Hilti cordless nibblers, including dies, punches, guides and cases
No technical data available
- Description
- Replacement parts and optional extras for Hilti cordless nibblers, including dies, punches, guides and cases
No technical data available
- Description
- Replacement parts and optional extras for Hilti cordless nibblers, including dies, punches, guides and cases
No technical data available
- Description
- Replacement parts and optional extras for Hilti cordless nibblers, including dies, punches, guides and cases
No technical data available
- Description
- Replacement parts and optional extras for Hilti cordless nibblers, including dies, punches, guides and cases
No technical data available
- Description
- Replacement parts and optional extras for Hilti cordless nibblers, including dies, punches, guides and cases
- Additional Accessory Information
- For cutting laterally or longitudinally across fluted or corrugated sheet metal.
- Description
- Replacement parts and optional extras for Hilti cordless nibblers, including dies, punches, guides and cases
No technical data available