Search Results
861
Products for "dx 5"
Filter
- Description
- Clamp with pre-assembled Fast-Lock nut and bolt for channel-to-channel cross-connections with MT strut channel
- Material composition
- Q235B
- Material and coating
- Carbon steel - indoor coated
- Material thickness
- 4 mm
- Description
- Clamp with pre-assembled Fast-Lock nut and bolt for channel-to-channel cross-connections with MT strut channel, for outdoor use with low pollution
- Material composition
- Q235B
- Material and coating
- Carbon steel - outdoor coated
- Material thickness
- 4 mm
- Description
- Clamp for channel-to-channel or channel-to-girder cross-connections with MT strut channel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Clamp for channel-to-channel or channel-to-girder cross-connections with MT strut channel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Channel connector plate for fixing panels to strut or MT girders, including for hot/cold containment in data centers
- Material composition
- Q235B - ASTM A36
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 3 mm
- Description
- High-pressure gas can for use with the GX 2 and GX-IE gas nailers
- For use with (tools)
- GX 2, GX-IE, GX-IE XL
- Substances contained
- 1-buthene, propene, propane, polyglycol
- Storage temperature - min.
- 41 °F
- Description
- DD-SS single segments (25 packs)
- Base materials
- Concrete
- Drilling Mode
- N/A
- Wet or dry operation
- Wet
ultimate
- Description
- Single nail for fastening to concrete and steel using powder-actuated nailers
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
ultimate
- Description
- Collated nail for fastening to concrete and steel using powder-actuated nailers
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Short-stroke gas nailer for drywall track
- Tool body weight
- 8.2 lb
- Fastener Intake
- Collated
- Fastener length range
- 0.55 - 1.54 in
- Description
- Self-securing water collector system
- For use with
- DD-WMS 100
- Description
- Depth gauge for use with drywall screwdrivers for a precise adjustment of setting depth
- Length
- 2 in
- Weight
- 0.1 lb
- Description
- Chuck adapter
- Product information
- Adapter to fit DD 200, DD 350 and DD 500 on M2 drill stand
- Additional Accessory Information
- Adapter to fit DD 200, DD 350 and DD 500 on M2 drill stand
- Description
- Core bit extension
- Working length
- 20 in
- Diameter
- 46.7 mm
- Description
- Core bit extension
- Working length
- 20 in
- Diameter
- 46.7 mm
- Description
- Depth gauge for use with drywall screwdrivers for a precise adjustment of setting depth
- Length
- 2 in
- Weight
- 0.1 lb
- Description
- Premium cut-out bit with guide point for cutting drywall and gypsum board
- Base material
- Drywall, Gypsum
- Product Class
- Premium
- Description
- Ultimate diamond cup wheel for the DG/DGH 150 diamond grinder – for grinding green and abrasive concrete
- Tool type
- Concrete grinder DG/DGH 150
- Base material
- Green concrete, Screed
- Product Class
- Ultimate
- Description
- Starting aid for hand-held diamond core bits
No technical data available
- Description
- Corded drywall screwdriver with 4500 rpm for drywall applications
- Max. torque
- 7 ft-lbs
- Rated voltage
- 120 V
- Weight
- 3.1 lb
Nuron
- Description
- Power-class cordless impact driver with high-speed brushless motor and precise handling to help you save time on high-volume fastening jobs (Nuron battery platform)
- Feature
- LED light ring around the chuck
- Chuck type
- 1/4" hexagonal click-in
- No load RPM
- gear 1: 1800 rpm; gear 2: 2700 rpm; gear 3: 3600 rpm
Nuron
- Description
- Compact brushless impact driver optimized for more reliable and efficient non-structural fastening in wood and metal (Nuron battery platform)
- Feature
- LED light around the chuck
- Chuck type
- 1/4" hexagonal click-in
- No load RPM
- gear 1: 3000 rpm
Nuron
- Description
- Compact, cordless right-angled impact driver for reaching tough to access applications
- Feature
- LED light
- Chuck type
- 1/4" hexagonal click-in
- No load RPM
- gear 1: 1600 rpm; gear 2: 2250 rpm
Nuron
- Description
- Nuron battery-powered cordless nailer for fastening drywall track and light-duty materials to concrete, steel, and masonry
- Dimensions (LxWxH)
- 18.7 x 5.9 x 15.2 in
- Fastener Intake
- Nails on strip
- Rated voltage
- 21.6 V
- Description
- Gas nailer with single power source for drywall track, electrical, mechanical and building construction applications
- Dimension (L x W)
- 436 x 132 mm
- Tool body weight
- 8.8 lb
- Fastener Intake
- Collated
Nuron
- Description
- Compact, light and fast cordless inline press tool compatible with interchangeable 24 kN press jaws (Nuron battery platform)
- Tool Press force
- 24 kN
- For use with jaws
- NPR PC Jaws
- Pressing capacity metal pipes
- 1-1/4 in
Nuron
- Description
- Versatile and comfortable cordless inline press tool compatible with interchangeable 32 kN press jaws and rings (Nuron battery platform)
- Tool Press force
- 32 kN
- For use with jaws
- NPR PS standard press jaws;NPR PR press rings;NPR PA 1 actuator;NPR PA 2 actuator;NPR PA 5 actuator
- Pressing capacity metal pipes
- 2-1/8 in
- Description
- Powerful D-grip SDS Plus (TE-C) rotary hammer drill with chipping function
- Weight according EPTA-Procedure 01/2003 without battery
- 7.5 lb
- Optimum Hammer drilling range
- 1/4 - 5/8 in
- Single impact energy
- 1.7 ft-lbs
- Description
- Hanger for concealed fastening of façade cladding using mechanical fasteners for rear fixing
- Height
- 63.5 mm
- Length
- 50 mm
- Material composition
- EN AW-6063 T66
- Description
- Hanger for concealed fastening of façade cladding using mechanical fasteners for rear fixing
- Height
- 63.5 mm
- Length
- 50 mm
- Material composition
- EN AW-6063 T66
- Description
- Hanger for concealed fastening of façade cladding using mechanical fastener for rear fixing
- Height
- 63.5 mm
- Length
- 50 mm
- Material composition
- EN AW-6063 T66
- Description
- Hanger for concealed fastening of façade cladding using mechanical fastener for rear fixing
- Height
- 63.5 mm
- Length
- 50 mm
- Material composition
- EN AW-6063 T66
- Description
- Hanger for concealed fastening of façade cladding using undercut anchors
- Height
- 63.5 mm
- Length
- 50 mm
- Material composition
- Aluminum EN AW-6063 T66
- Description
- Hard-sided carrying case for storing and transporting your Hilti measuring device and its accessories
- Types
- Individual tool cases
- Compatible with
- Measuring devices
- Description
- Hard-sided carrying case for storing and transporting your Hilti rotary hammer and its accessories
- Types
- Individual tool cases
- Compatible with
- Rotary hammers
- Dimensions (LxWxH)
- 22.8 x 5.9 x 18.1 mm
- Description
- Hard-sided carrying case for storing and transporting your Hilti rotary hammer and its accessories
- Types
- Individual tool cases
- Compatible with
- Rotary hammers
- Description
- Hard-sided carrying case for storing and transporting your Hilti cable cutter or crimper and its accessories
- Types
- Individual tool cases
- Compatible with
- Cutters and crimpers
- Dimensions (LxWxH)
- 19.5 x 15.6 x 5.9 mm
- Description
- Prisms and reflectors for construction total stations
- For use with (local pick)
- POS 150, POS 180
- Product information
- Reflector rod for precisely targeting to the point
- Additional Accessory Information
- Reflector rod for precisely targeting to the point
- Description
- Prisms and reflectors for construction total stations
- For use with (local pick)
- PLT 300
- Description
- Prisms and reflectors for construction total stations
- For use with (local pick)
- POS 15, POS 18, POS 150, POS 180, PLT 300
- Description
- Receivers and target plates for multi-directional lasers
- For use with (local pick)
- PM 2-L, PM 40-MG, PM 2-LG, PR 3-HVSG, PM 30-MG, PR 30-HVSG
- Product information
- Significantly improves the visibility of the green laser beam. The magnetic target plate attaches perfectly to the metal frame, freeing both hands for easy levelling of the suspended ceiling
- Additional Accessory Information
- Significantly improve the visibility of the green laser beam. The magnetic target plate attaches perfectly to the metal frame, freeing both hands for easy leveling of the suspended ceiling
- Description
- Universal target plates to increase the measurement accuracy of laser meters over long ranges or on critical surfaces
- For use with (local pick)
- PM 2-L, PM 4-M, PR 2-HS, PR 30-HVS, PR 300-HV2S
- Product information
- Increases measuring range over long distances and in unfavorable lighting conditions. Dimensions: 130 x 120 mm, black
- Additional Accessory Information
- Increases measuring range over long distances and in unfavorable lighting conditions. Dimensions: 130 x 120 mm, black
- Description
- Receivers and target plates for multi-directional lasers
- For use with (local pick)
- PD-CS, PD-E, PD-I, PD-S, PM 4-M, PMC 46, PMP 45
- Product information
- Significantly improve the visibility of the red laser beam
- Additional Accessory Information
- Significantly improve the visibility of the red laser beam
- Description
- Receivers and target plates for multi-directional lasers
- For use with (local pick)
- PMC 46, PMP 45, PM 20-CG, PM 20-CGE
- Product information
- Target plate for easy alignment of objects with points and combi lasers
- Additional Accessory Information
- For easy alignment of objects
- Description
- Accessory for Hilti detection systems/concrete scanners (please note the compatibility of specific items)
No technical data available
- Description
- Tripods and measuring rods compatible with rotating lasers
- For use with
- PR 2-HS, PR 30-HVS, PR 30-HVSG, PR 3-HVSG, PR 400-22, PR 40-22, PR 40G-22
- Additional Accessory Information
- "Made from aluminum, adjustable in height between 1m and 5 m, weight 1.92 kg. Aluminum is 100% recycled, reducing CO2 by 85%. "
- Product information
- E scale and metric (cm) telescopic levelling staff made from aluminum, adjustable in height between 1m and 5 m, weight 1.92 kg
- Description
- Tripods and measuring rods compatible with rotating lasers
- Additional Accessory Information
- "Imperial (in) and metric (cm) aluminum measuring rod with a maximum adjustable height of 7'11"" (2.41 m).Aluminum is 100% recycled, reducing CO2 by 83%."
- Product information
- Imperial (in) and metric (cm) aluminum measuring rod with a maximum adjustable height of 7'11" (2.41 m)
- Max. Height
- 2400 mm
- Description
- Grease to lubricate chucks for rotary hammers, demolition hammers and breakers
No technical data available
ProKit
- Description
- Tool box with 5gal | 19l capacity, built with impact resistance, IP65 rating, and interlocking system for one-handed operation (ProKit Modular Storage System)
- Size
- M
- Dimensions (LxWxH)
- 15.2 x 21.8 x 6.6 in
- Internal dimensions
- 14.4 x 20.3 x 4 in
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
- Description
- Extension cord for Hilti SDS Max (TE-Y) rotary hammers and breakers
No technical data available
- Description
- Depth gauge to set maximum drilling depth
No technical data available
- Description
- Seal for the DD-WCS water collector system
- For use with
- DD 160, DD 200, DD 250, DD 250-CA, DD 350-CA, DD 500-CA
- Description
- Collated Clean-Tec cartridges for use with powder actuated nailers
- For use with (tools)
- DX 2, DX 351, DX 351 CT, DX 351 M/E, DX 351 MX 27, DX 351 MX 32, DX 36, DX 450, DX 460 F10, DX 460 F8, DX 460 F8S12, DX 460 FP8, DX 460 GR, DX 460 IE, DX 460 IE-XL, DX 460 MX, DX 460 MX, DX 460 SM, DX 460 SR, DX 462 CM, DX 462 CM, DX 462 F8, DX 462 F8S12, DX 5 F10, DX 5 F10 PTR, DX 5 F8, DX 5 F8S12, DX 5 GR, DX 5 IE, DX 5 IE-XL, DX 5 MX, DX 5 MX, DX 5 SM, DX A40, DX A41
- Cartridge type
- 6.8/11 M10
- Cartridge strip capacity
- 10
ProKit
- Description
- ProKit Trolley with durable 10.5" | 27cm wheels and connection points for stacking or hanging up to 250lb | 113kg of ProKit storage (ProKit Modular Storage System)
- Dimensions (LxWxH)
- 12 x 21.3 x 43.8 in
- ProKit compatible
- Yes
- Types
- Trolleys
ultimate
- Description
- Ultimate diamond cup wheel for angle grinders – for finishing grinding concrete and natural stone
- Tool type
- Cordless angle grinder, Corded angle grinder
- Base material
- Concrete, Natural stone
- Product Class
- Ultimate
ultimate
- Description
- Ultimate diamond cup wheel for angle grinders – for faster grinding of concrete, screed and natural stone
- Tool type
- Cordless angle grinder, Corded angle grinder, Concrete grinder DGH 130
- Base material
- Concrete, Screed, Natural stone
- Product Class
- Ultimate
premium
- Description
- Premium diamond cup wheel for angle grinders – for faster grinding of concrete, screed and natural stone
- Tool type
- Cordless angle grinder, Corded angle grinder, Concrete grinder DGH 130
- Base material
- Concrete, Screed, Natural stone
- Product Class
- Premium
standard
- Description
- Standard diamond cup wheel for angle grinders – for faster grinding of concrete, screed and natural stone
- Tool type
- Cordless angle grinder, Corded angle grinder
- Base material
- Concrete, Screed, Natural stone
- Product Class
- Standard