Search Results
1058
Products for "AG 6D-22"
Filter
Nuron
- Description
- 15 liter (8 gallon) dust extractor tank with wheels and push bar, compatible with VC 4X-22 cordless dust extractors (wet & dry)
- Dust capacity
- 36 lb
- Application
- Cleaning, Drilling and breaking, Wood sawing, Cutting and grinding (light, up to 125 mm / 5 in), Drywall and wood sanding, Wet coring, Socket cutting
- Power source
- Cordless
- Description
- Accessories for the DS TS20-E wall saw
No technical data available
ultimate
- Description
- Ultimate diamond blade for superior cutting in metal and PVC, with permanent markings for correct usage
- Tool type
- Angle grinder, Gas saw, Battery cut-off saw
- Base material
- Metal, PVC, Steel, Wood, Cast iron
- Product Class
- Ultimate
- Description
- Light-duty basic profile for use in outdoor environments
- Material composition
- S280 or better steel
- Surface finish
- Outdoor Coated - ZM
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Accessories for the DS TS20-E wall saw
No technical data available
- Description
- Economical sleeve anchor (acorn nut)
- Head configuration
- Externally threaded w/acorn nut
- Environmental conditions
- Indoor, dry conditions
- Approvals / Test reports
- N/A
- Description
- Galvanized channel foot for fastening MQ channels to concrete
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanized
- Material thickness
- Channel connector: 4 mm, baseplate: 6 mm
- Description
- Accessories for the DS TS20-E wall saw
No technical data available
- Description
- Accessories for the DS TS20-E wall saw
No technical data available
- Description
- Accessories for the DS TS20-E wall saw
No technical data available
premium
- Description
- Extra-sharp asphalt cutter chisels for faster, more precise breaking up of asphalt or hard-packed gravel using the third-gen TE 3000 or H28 demolition tools with clamp
- Connection end
- TE-H (Hilti HEX 28)
- Application
- Asphalt cutting
- Product Class
- Premium
standard
- Description
- Single nail for fastening to concrete using powder-actuated tools
- Base materials
- Concrete (soft), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Very robust stainless steel tracking tag for tools and equipment exposed to extremely tough environments
- Dimensions (LxWxH)
- 0.7 x 0 x 1.7 in
- Barcode type
- 2D barcode (Datamatrix ECC200)
- Operating temperature range
- -40 - 392 °F
- Description
- 45-degree angle brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Adjustable brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
standard
- Description
- Collated nails for fastening to concrete and other base materials using the GX 120 gas nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
ultimate
- Description
- Angle grinder backing pads for use with fiber discs of various grain sizes
- Base material
- Steel, Stainless steel
- Product Class
- Ultimate
- Description
- 45-degree angle brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Heavy-duty angled baseplate for bracing, long span supports or inclined surfaces, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 10 mm
- Description
- Adjustable brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Durable asset tag to track construction equipment location and demand via the Hilti ON!Track tool tracking system – optimize your inventory and save time managing it
- Dimensions (LxWxH)
- 1.3 x 0.9 x 0.2 in
- Barcode type
- 2D barcode (Datamatrix ECC200)
- IP protection class
- IP 67 (IEC 60529)
- Description
- Hot-dip galvanized adjustable heavy-duty bracing and baseplate suitable for girders, concrete and steel
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 10 mm
- Description
- Adjustable brace fitting for assembling MT girder structures, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- 45-degree angle bracket for bracing MT-40 and MT-50 strut channel structures
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Ultimate SDS Plus (TE-C) hammer drill bit for anchor drilling into reinforced concrete (metric)
- Connection end
- TE-C (SDS Plus)
- Base material
- Reinforced concrete, Concrete, Brick, Masonry
- Working mode
- Hammer drilling
- Description
- Stainless steel (A4) self-drilling screw without washer for profile-to-profile facade fastenings
- Base materials
- Aluminium
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor, rural or urban environment with low pollution, Outdoor with moderate concentration of pollution, Outdoor, areas with heavy industrial pollution, Close proximity to roads, Coastal areas
- Product Class
- Premium
- Description
- 45-degree angle bracket for bracing MT-40 and MT-50 strut channel structures, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Ultimate-performance through-set undercut anchor for dynamic loads (sherardized steel)
- Material, corrosion
- Carbon steel, HDG (Hot-Dip Galvanized)/Sherardized
- Head configuration
- Externally threaded
- PROFIS Software
- No
premium
- Description
- Plastic membrane washer with pre-mounted nail, for attaching waterproofing membrane to concrete or masonry
- Application
- Water proofing
- For use with (tools)
- DX 2, DX 351, DX 460, DX 5, DX 6
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Self-drilling screw (A2 stainless steel) without washer for DBV (drained & back-ventilated) rainscreen façade installation (up to 0.16 inch)
- Screw drive/recess type
- Hexagon 8
- Base materials
- Aluminium
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor, rural or urban environment with low pollution, Outdoor with moderate concentration of pollution
- Description
- Self-drilling screw (A4 stainless steel) without washer for DBV (drained & back-ventilated) rainscreen façade installation (up to 0.16 inch)
- Screw drive/recess type
- PH #2
- Base materials
- Carbon steel, Aluminium
- Environmental Conditions
- Dry indoor, Outdoor, rural or urban environment with low pollution, Outdoor with moderate concentration of pollution, Outdoor, areas with heavy industrial pollution, Close proximity to roads, Coastal areas
- Description
- Self-securing water collector system
- Product information
- Water collector system up to Ø 67 mm
- For use with
- DD 110-W, DD 120, DD 150-U, DD 160, DD 200, DD 250, DD 250-CA, DD 350-CA, DD 500-CA
- Additional Accessory Information
- Water collector system up to Ø 67 mm
- Description
- Ultimate-power 36V 9.0 Ah Li-ion battery for extreme run time
- Weight
- 4.48 lb
- Dimensions (LxWxH)
- 7.1 x 3.9 x 4.1 in
- Working temperature range
- 1 - 140 °F
- Description
- Stop drill bit – required for installation of HDA undercut anchors
- Connection end
- TE-C (SDS Plus)
- Working mode
- Drilling, Hammer drilling
- Base material
- Concrete
- Description
- Ultimate-power 36V 5.2 Ah Li-ion battery
- Weight
- 2.98 lb
- Dimensions (LxWxH)
- 6.6 x 3.6 x 3.2 in
- Working temperature range
- 1 - 140 °F
- Description
- Modules to seal cables/pipes within transit frames in potentially explosive atmospheres
- Temperature resistance range
- -40 - 167 °F
- Free from
- Halogen (halogen content <= 0.1 weight %)
- Description
- Baseplates and fastener guides for the DX 35 semi-automatic powder actuated fastening tool
- Fastener Intake
- Single nail
- For use with (tools)
- DX 35
- Description
- Baseplates and fastener guides for the DX 35 semi-automatic powder actuated fastening tool
- Fastener Intake
- Single nail
- For use with (tools)
- DX 35
- Description
- SDS Max (TE-Y) cruciform hammer drill bit for larger-diameter drilling into concrete and masonry
- Base material
- Concrete, Masonry, Brick, Limestone
- Working mode
- Hammer drilling
- Product Class
- Ultimate
- Description
- Tripod accessory for all our line lasers
- For use with
- PM 20-CG, PM 20-CG 12V, PM 2-L, PM 2-LG, PM 30-MG, PM 40-MG, PM 4-M, PMC 46
- Additional Accessory Information
- Compact tripod with 1/4” thread, extendable up to 1.2 m and fits neatly within the case PMA 62. The user is able to set up the system quickly anywhere on the jobsite.
- Product information
- Compact tripod with 5/8” thread, including an adaptor for adjusting threads from 5/8" to 1/4", extendable up to 1.2 m allows the user to set up the system quickly anywhere on the jobsite.
- Description
- Ultimate-performance collated nails for fastening to steel using powder-actuated tools
- Base materials
- Steel
- Minimum thickness of base material (concrete)
- 80 mm
- Minimum thickness of base material (steel)
- 1/4 in
standard
- Description
- Premium collated nails for fastening to concrete and other base materials using the GX 3 gas nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Stop drill bit – required for installation of HDA undercut anchors
- Connection end
- TE-Y (SDS Max)
- Working mode
- Hammer drilling, Drilling
- Base material
- Concrete
- Description
- Baseplates and fastener guides for the DX 35 semi-automatic powder actuated fastening tool
- Fastener Intake
- Single nail
- For use with (tools)
- DX 35
- Description
- Remote/receivers and holders for your Hilti PR rotating lasers
No technical data available
- Description
- Accessory for the DG 150 concrete grinder
No technical data available
- Description
- Disassembly tool – for easy removal of HDA undercut anchors
No technical data available
- Description
- Modules to seal cables/pipes within a transit frame when high water- and gas-tightness and fire-resistance are required
- Approvals
- UL
- Temperature resistance range
- -40 - 122 °F
- Free from
- Halogen (halogen content <= 0.1 weight %)
- Description
- Ultimate-performance collated nails for fastening to concrete and other base materials using the GX 120 gas nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- 24" Continuous core bit barrels
- For use with
- DD 200, DD 350-CA, DD 500-CA
- Base materials
- Concrete
- Wet or dry operation
- Wet
ultimate
- Description
- Ultimate-performance collated nails for fastening to steel using the GX 120 gas nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 3/16 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- DD-SS single segments (25 packs)
- Base materials
- Concrete
- Drilling Mode
- N/A
- Wet or dry operation
- Wet
- Description
- Extension for SDS Max (TE-Y) hammer drill bits - 2 components required (TE-FY extension plus TE-Y-AD adapter)
- Type
- Extension
- Connection end
- TE-Y (SDS Max)
- Working mode
- Hammer drilling
- Description
- Ultimate-performance heavy-duty wedge anchor with approvals for safety-relevant applications in concrete (carbon steel, hex head)
- Material, corrosion
- Carbon steel, zinc-plated, Zinc plated (min. 5 microns)
- Head configuration
- Hex head
- Approvals / Test reports
- ICC-ES report (concrete), LABC, Seismic
- Description
- Ultimate-performance collated nails for fastening to concrete and other base materials using the GX 3 gas nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Minimum thickness of base material (steel)
- 3/16 in
- Description
- Heavy-duty box profile for use with MT-TFB components in outdoor environments
- Material composition
- S350 or better steel
- Surface finish
- Outdoor Coated - ZM
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Clamp for concealed fastening of facade panels
- Material composition
- Clamps: A2 (1.4301)
- Description
- Remote/receivers and holders for your Hilti PR rotating lasers
- Product information
- Construction laser receiver PRA 20G allows to detect the green laser beam of Hilti rotating lasers up to 150m range and displays the offset value on the digital screen
- Description
- Remote/receivers and holders for your Hilti PR rotating lasers
No technical data available
- Description
- Stainless steel (A4) hexagon nut corresponding to DIN 934
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4-70
- Surface finish
- Outdoor Plus - Stainless Steel