More speed and precision
Metal
Fasten self‑drilling and self‑tapping screws into steel with high-speed control. Ideal for decking, HVAC, frames and sheet-metal.
Impact drivers and wrenches
Drivers
More speed. More torque. Less strain.
Faster drives in timber
Wood
Drive long wood screws faster with high RPM and balanced handling for framing, formwork and general carpentry.
Reliable hold in hard materials
Concrete and masonry
Set concrete screws and anchors more reliably with optimized impact mechanisms designed for harder base materials.
More speed and precision
Metal
Fasten self‑drilling and self‑tapping screws into steel with high-speed control. Ideal for decking, HVAC, frames and sheet-metal.
Faster drives in timber
Wood
Drive long wood screws faster with high RPM and balanced handling for framing, formwork and general carpentry.
Reliable hold in hard materials
Concrete and masonry
Set concrete screws and anchors more reliably with optimized impact mechanisms designed for harder base materials.
For quick to high-volume fastening
Speed and control for every job
Rapid trigger response and advanced cooling help deliver reliable speed in high-volume fastening.
More work per charge
Advanced cooling and brushless drive deliver more work-per-charge while helping prevent overheating.
Clear visibility. No shadows.
Built-in LED delivers even light on your work surface to support safer, more precise fastening.
Comfortable grip all day
Slim, balanced design helps reduce fatigue, so you stay in control on repeat work and in tight spots.
More work per charge. Less energy wasted.
Power for every application
For quick jobs and repeat fastening
Choose the SID 4-22 for compact control in tight spaces. For more power and longer runs, step up to the SID 6-22.
SID 4‑22 CORDLESS IMPACT DRIVER
Lightweight, compact power
Up to
186
Low-frequency work
Light-duty, occasional fastening
SID 6‑22 CORDLESS IMPACT DRIVER
Your go-to for serial fastening
Up to
300
High-frequency tasks
Heavy-duty, continuous fastening
“The SID just keeps going. Even on heavy metal-to-metal fastening, the torque stays consistent all day.”
— MARK. D
Pick your impact driver
FAQs
Impact drivers provide both the rotational force that you get with a drill plus impact for greater efficiency in driving screws and nuts. They are great for more safely and quickly driving in fasteners into tougher base materials such as steel, wood, masonry and concrete.
The main difference between a drill driver and an impact driver is the power and rotational action you get with an impact driver. Impact drivers produce a lot of rotational force and more torque than drills, and are better for driving screws, whereas drills are better suited to drilling holes.
In addition, impact drivers are usually smaller and lighter than drills, making it more comfortable to use them for longer periods of time, and in tight spaces.
For replacing drill drivers on multifamily construction crews, the Hilti SID 6-22 cordless impact driver is designed for high-volume fastening across framing, MEP, drywall, and finish work. For crews regularly driving larger structural fasteners, the Hilti SID 8-22 impact driver provides additional torque for heavy-duty applications.
Why it's recommended:
For crews moving to a single battery platform, the Hilti SID 4-22, SID 6-22, and SID 8-22 cordless impact drivers all operate on the Nuron battery platform, allowing crews to choose the right fastening performance while using the same batteries and chargers across compatible tools.
Why it's recommended:
Shared Nuron batteries simplify fleet management.
Multiple performance levels fit different fastening applications.
Compatible chargers help reduce equipment on the jobsite.
Cordless platform supports a wide range of construction trades.
For electricians, the SID 4-22 offers power with a lighter weight. For framing crews, the Hilti SID 6-22 cordless impact driver is well suited for general framing and connector installation, while the SID 8-22 impact driver is designed for driving larger structural screws and timber fasteners.
Why it's recommended:
SID 4-22 balances power and weight.
SID 6-22 balances speed and versatility.
SID 8-22 delivers maximum torque for structural fastening.
Both feature brushless motors for demanding jobsites.
Nuron batteries provide cordless mobility.
20 Year Limited Warranty²
Defects in Material and Workmanship
Hilti will repair or replace parts that break as a result of defects in material or workmanship for 20 years.
2 Year Wear and Tear Coverage³
No cost coverage
Hilti will repair tools at no cost for 2 years from the date of purchase. Damage due to normal wear and tear is covered, including parts, labor, and shipping.
1 Day Repair Turnaround⁴
In and out of the repair center in one day, guaranteed, or the repair is free.
If Hilti does not repair a tool the same day it is received in a Tool Service Center then the repair is free - including parts, labor and shipping.
(1)This 20-2-1 Warranty modifies only the “WARRANTY” provision of Hilti’s General Terms & Conditions of Sale for Hilti-brand tools, replacing the standard 12-month product warranty. All other Terms and Conditions, including the service warranty, exclusions, disclaimers of implied warranties, and limitations of liability, remain unchanged. This is a professional warranty for tools sold for commercial and professional use and does not create additional consumer rights. Coverage applies only to Hilti-branded tool bodies and excludes batteries, chargers, components, accessories, and consumables. Customers’ statutory warranty rights remain unaffected.
(2) Exclusions apply. Products excluded from the 20-year coverage are covered only under the warranty stated in the General Terms and Conditions of Sale. Excluded products include: [grinders, SD screwdrivers, gas saws, WSR corded tools, UD/UH tools, certain hydraulic and powder actuated components, batteries, and combo kit accessories].
(3) Wear and tear coverage excludes damage due to abuse or use outside the operator’s manual. The following consumable items are excluded and are the customer’s responsibility: pistons, buffers, and spring clips for powder-actuated tools; pull-cord assemblies and filters for gas saws; filters for vacuums; and hydraulic jaws, blades, and dies for hydraulic tools. Fully excluded from wear and tear coverage: grinders, SD 4500, SD 2500, gas saws, WSR corded tools, and UD and UH tools. Covered for one (1) year only: DX 860 and DX 9. Covered for two (2) years or 200 hours of usage, whichever comes first: wall saw head, remote control, E-box, and wire saw power unit and control box.
(4) The one-day repair turnaround begins when the tool is received at a Hilti Tool Service Center (TSC). Eligibility requires pre-approval of the Repair Cost Limit (RCL); repairs authorized below the RCL or requiring a quotation are not eligible. The program is limited to five tools per company per day per TSC and applies only to tools received through Hilti-approved carriers. Delays in payment authorization or force majeure events void the guarantee. Excluded products include total stations, optical devices, detection tools, wall saws, wire saws, and HAT 28. Out-of-warranty tools qualify only with RCL pre-approval. The one-day-or-free program may be discontinued at any time. If Hilti does not meet the turnaround requirement, the customer’s exclusive remedy is a free repair, including parts, labor, and shipping. Hilti is not liable for damages or losses caused by late delivery.
Get your impact driver