Search Results
822 Products for "6-22 impact driver"
Filter
- Description
- Versatile and powerful SDS Max (TE-Y) rotary hammer for concrete drilling and chiseling, with Active Vibration Reduction (AVR) and Active Torque Control (ATC)
- Weight according EPTA-Procedure 01/2003 without battery
- 17.2 lb
- Single impact energy
- 5.8 ft-lbs
- Hammer drilling diameter range
- 15/32 - 3-15/16 in
- Description
- Compact top-handle gas saw (63cc) with blade brake, for cutting up to 4-3/4" with 12" blades in concrete, masonry, and metal
- Motor cylinder
- 63.3 cm³
- Rated power
- 3.2 kW
- Wet or dry operation
- Wet and Dry
- Description
- Optical level for everyday leveling tasks with 20x magnification
- Magnification
- 20 x
- Compensator type
- Air-damping
- IP protection class
- IP 55 (EN 60529)
- Description
- Exchangeable chuck/adapter to simplify drilling and screwdriving in tight spaces using the SFE 2-A12 multi-head drill driver
- For use with
- SFE 2-A12
- Product information
- Hex bit holder – locking chuck for standard hex bits
- Description
- Exchangeable chuck/adapter to simplify drilling and screwdriving in tight spaces using the SFE 2-A12 multi-head drill driver
- For use with
- SFE 2-A12
- Product information
- Right-angle drill driver adapter – gives you additional reach when working with limited clearance
- Description
- Exchangeable chuck/adapter to simplify drilling and screwdriving in tight spaces using the SFE 2-A12 multi-head drill driver
- For use with
- SFE 2-A12
- Product information
- Offset chuck – you can drive screws straight-on with only 10 mm clearance from an adjacent surface
- Description
- Tester for proof loading and determination of pullout resistance of anchors and DX fasteners
No technical data available
- Description
- Semi-automatic powder actuated tool for fastening single nails in medium-duty applications on both concrete and steel
- Dimensions (LxWxH)
- 13.6 x 2 x 6.2 in
- Weight
- 5.3 lb
- Fastener Intake
- Single
- Description
- Gas nailer for insulation fastening on soft and some tough concrete and cold formed steel studs (insulation board thickness 25 – 200 mm | 1" – 7 7/8")
- Fastener Intake
- Single
- Fastener length range
- 0.98 - 7.87 in
- Power source type
- GC 52 Gas can
- Description
- Advanced heavy-duty diamond drilling tool with optional Cut Assist autofeed unit for coring very small to large diameter holes of 12-500 mm (1/2" - 20”)
- Diameter range
- 15/32 - 19-11/16 in
- Base material
- Concrete, Reinforced concrete, Asphalt
- Operation mode
- Rig-based drilling system
- Description
- Variable speed angle grinder with slide switch for cutting and grinding in metal, concrete, and masonry with discs up to 5”
- Disc diameter
- 5 in
- No load RPM
- gear 1: 3000 rpm; gear 2: 4000 rpm; gear 3: 5000 rpm; gear 4: 6000 rpm; gear 5: 7500 rpm; gear 6: 9400 rpm
- Trigger type
- Constant on
- Description
- Powerful corded angle grinder with dead man’s switch for cutting and grinding in metal, concrete, and masonry with discs up to 5” (14-amp)
- Disc diameter
- 5 in
- No load RPM
- gear 1: 9400 rpm
- Trigger type
- Paddle with deadman
- Description
- Multi-line laser with 3 green 360° lines for plumbing, leveling, aligning and squaring
- Accuracy
- ±0.12 in at 33 ft
- Max. operating distance (diameter)
- 131 ft (lines), 328 ft (lines, with receiver)
- Self leveling range at room temperature
- -4.0/ +4.0° °
- Description
- Three-phase heavy-duty diamond coring machine with high-frequency motor and optional auto-feed unit for rig-based concrete coring from 82-600 mm (3-7/32 - 23-5/8”) in diameter
- Diameter range
- 3-7/32 - 23-5/8 in
- Base material
- Concrete, Reinforced concrete
- Operation mode
- Rig-based drilling system
- Description
- Customized screwdriver bits for Hilti screw fastening systems
- Connection end
- Hexagonal
- Description
- Short-stroke gas nailer for drywall track
- Tool body weight
- 8.2 lb
- Fastener Intake
- Collated
- Fastener length range
- 0.55 - 1.54 in
- Description
- Gas nailer with single power source for drywall track, electrical, mechanical and building construction applications
- Dimension (L x W)
- 436 x 132 mm
- Tool body weight
- 8.8 lb
- Fastener Intake
- Collated
- Description
- Versatile breaker for demolishing or chiseling floors and occasional wall applications (with universal power cord)
- Working direction
- Floor, Wall
- Tool chuck type
- TE-S
- Weight according EPTA-Procedure 01/2003 without battery
- 27.6 lb
- Description
- Easy-to-use laser meter for distance and area measurements up to 60 m / 200 ft
- Measuring range
- 8 in - 197 ft
- Measurement accuracy
- 1.5 mm
- Measuring functions
- Single and continuous measurement
- Description
- Very powerful dust extractor for connection with power tools and jobsite clean ups (wet & dry), 60l tank - OSHA compliant with 300 CFM
- Water capacity
- 13 gal (US)
- Container capacity
- 60 l
- Dust capacity
- 159 lb
- Description
- Professional-performance screwdriver bit with torsion zone and holding function for better sticking in soft joint applications
- Connection end
- 1/4 in Hex shank
- Description
- Ultimate SDS Plus (TE-C) hammer drill bit for anchor drilling into reinforced concrete (metric)
- Connection end
- TE-C (SDS Plus)
- Base material
- Reinforced concrete, Concrete, Brick, Masonry
- Working mode
- Hammer drilling
- Description
- Setting tools and accessories for the Kwik-Con + and Kwik-Con II+ screw anchors
- Material, corrosion
- N/A
- Head configuration
- N/A
- Material composition
- N/A
standard
- Description
- Collated nails for fastening to concrete and other base materials using the GX 120 gas nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Customized nut setter for Hilti decking screw fastening systems
- Connection end
- 1/4 in Hex shank
- Description
- Professional-performance screwdriver bit with torsion zone for soft joint applications
- Connection end
- 1/4 in Hex shank
- Description
- Ultimate-performance pre-set undercut anchor for dynamic loads (sherardized steel)
- Material, corrosion
- Carbon steel, HDG (Hot-Dip Galvanized)/Sherardized
- Head configuration
- Externally threaded
- PROFIS Software
- No
- Description
- Sanding discs for DWS 225 long-neck drywall sanders
- Base material
- Drywall, Gypsum, Wood
- Description
- Heavy-duty reciprocating saw blade for demolishing wood containing nails – extra-strong in metal, fast in wood
- Product Class
- Premium
- Shank
- 1/2 in universal shank
- Teeth per inch
- 6
- Description
- Ultimate SDS Max (TE-Y) hammer drill bit for exceptional concrete drilling performance (imperial)
- Connection end
- TE-Y (SDS Max)
- Base material
- Reinforced concrete, Concrete, Masonry, Brick, Limestone
- Working mode
- Hammer drilling
standard
- Description
- Reciprocating saw blade for flexible, fine cutting of 1-3 mm (< 1/8") sheet metal
- Product Class
- Standard
- Shank
- 1/2 in universal shank
- Teeth per inch
- 24
ultimate
- Description
- Ultimate-performance collated nails for fastening to steel using the GX 120 gas nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 3/16 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Ultimate-performance through-set undercut anchor for dynamic loads (sherardized steel)
- Material, corrosion
- Carbon steel, HDG (Hot-Dip Galvanized)/Sherardized
- Head configuration
- Externally threaded
- PROFIS Software
- No
premium
- Description
- High-performance abrasive grinding disc for fast, rough grinding of stainless/carbon steel (Type 27)
- Base material
- Steel, Stainless steel
- Product Class
- Premium
- Grain type
- Zirconium
- Description
- Ultimate-performance ceramic grinding disc for fast, rough grinding – recommended for stainless steel (Type 27)
- Base material
- Steel, Stainless steel
- Product Class
- Ultimate
- Grain type
- Ceramic
- Description
- Optional extras/spare parts for DWS 225 long-neck drywall sanders
No technical data available
- Description
- Stop drill bit – required for installation of HDA undercut anchors
- Connection end
- TE-C (SDS Plus)
- Working mode
- Drilling, Hammer drilling
- Base material
- Concrete
- Description
- Heavy-duty reciprocating saw blade designed for demolishing wood containing nails – strong in metal, fast in wood
- Product Class
- Premium
- Shank
- 1/2 in universal shank
- Teeth per inch
- 6
premium
- Description
- Heavy-duty reciprocating saw blade for drywall demolition – strong and smooth in metal, fast in boards
- Product Class
- Premium
- Shank
- 1/2 in universal shank
- Teeth per inch
- 10
- Description
- Premium core bit for coring in all types of concrete – for ≥2.5 kW tools
- For use with
- DD 200, DD 250-CA, DD 350-CA, DD 500-CA
- Base materials
- Concrete
- Drilling Mode
- Rig-mounted
- Description
- Moldable firestop putty to help protect electrical outlet boxes, junction boxes and metallic washer/dryer boxes
- Approx. Density
- 1.6 g/cm³
- Color
- Red
- Surface burning characteristics UL 723 (ASTM E84)
- Flame spread: 15<BR>Smoke development: 10
standard
- Description
- Premium collated nails for fastening to concrete and other base materials using the GX 3 gas nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Stop drill bit – required for installation of HDA undercut anchors
- Connection end
- TE-Y (SDS Max)
- Working mode
- Hammer drilling, Drilling
- Base material
- Concrete
standard
- Description
- Single nail for fastening to concrete using powder-actuated tools
- Base materials
- Concrete (soft), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Disassembly tool – for easy removal of HDA undercut anchors
No technical data available
- Description
- Ultimate-performance collated nails for fastening to concrete and other base materials using the GX 120 gas nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Masonry drill bit for drilling holes primarily in masonry
- Connection end
- Cylindrical
- Base material
- Masonry, Drywall, Light-weight concrete
- Working mode
- Hammer drilling, Drilling only
ultimate
- Description
- Ultimate core bit for coring in all types of concrete – for use with the DD EC-1 and DD 30-W (incl. Hilti C+ quick-release connection end)
- For use with
- DD 30-W
- Base materials
- Concrete
- Drilling Mode
- Hand-held, Rig-mounted
- Description
- Ultimate-performance collated nails for fastening to concrete and other base materials using the GX 3 gas nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Minimum thickness of base material (steel)
- 3/16 in
- Description
- Reciprocating saw blades for cutting 3-8 mm (1/8 - 5/16") thick metal
- Product Class
- Standard
- Shank
- 1/2 in universal shank
- Teeth per inch
- 14
ultimate
- Description
- Ultimate HSS cobalt drill bit for drilling in thick metal and stainless steel, DIN 338 compliant (imperial)
- Product Class
- Ultimate
- Connection end
- Smooth shank
- Material composition
- M35 material & 5% cobalt
- Description
- Premium diamond cup wheel for the DG/DGH 150 diamond grinder – for faster grinding of concrete, screed and natural stone
- Tool type
- Concrete grinder DG/DGH 150
- Base material
- Concrete, Screed, Natural stone
- Product Class
- Premium
- Description
- Modular, versatile accessories to adapt CP 680 firestop cast-in sleeves for use in virtually any slab
No technical data available
- Description
- Longer-lasting reciprocating saw blade for cutting 5-15 mm (3/16 - 9/16") thick metal
- Product Class
- Premium
- Shank
- 1/2 in universal shank
- Teeth per inch
- 10
- Description
- Ultimate diamond cup wheel for the DG/DGH 150 diamond grinder – for faster grinding of concrete, screed and natural stone
- Tool type
- Concrete grinder DG/DGH 150
- Base material
- Concrete, Screed, Natural stone
- Product Class
- Ultimate
ultimate
- Description
- Ultimate-performance single nail for fastening to concrete and other base materials using powder-actuated tools
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Clip for mounting SZ 20 system
- Height
- 15 mm
- Length
- 40 mm
- Material composition
- Plastic
New
ultimate
- Description
- Ultimate carbide reciprocating saw blades for demolition and fast cutting through metal, wood and other materials
- Product Class
- Ultimate
- Teeth per inch
- 6
- Blade features
- Long life, Fast cut, Straight cut, Carbide tipped
- Description
- Optional extras/spare parts for DWS 225 long-neck drywall sanders
No technical data available
- Description
- Optional extras/spare parts for DWS 225 long-neck drywall sanders
No technical data available