Search Results
1089 Products for "te-1500 breaker hammer"
Filter
- Description
- Ultimate-performance collated nails for fastening to concrete and other base materials using the GX 120 gas nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
standard
- Description
- Single nail for fastening to concrete using powder-actuated tools
- Base materials
- Concrete (soft), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Collated drywall screw (Kwik-cote coated) for the SD-M 2 screw magazine – for fastening drywall boards to wood
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 2 screw magazine
- Description
- Node for assembling strut channels in a T shape
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Flat T channel connector for fastening two MT strut channels together, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Ultimate-performance short drop in anchor for shallow embedments in cracked/uncracked concrete and seismic applications
- Environmental conditions
- Dry indoor
- Approvals / Test reports
- FM (Factory Mutual), Seismic, UL (Underwriter Laboratories)
- Material, corrosion
- Carbon steel, zinc-plated
Nuron
- Description
- Ultimate 22V Li-ion battery built to boost the performance and run time of heavy-duty Nuron power tools
- Weight
- 2.88 lb
- Dimensions (LxWxH)
- 6.1 x 3.4 x 3 in
- Working temperature range
- 1 - 140 °F
- Description
- #3 pilot point screw for the SD-M 2 screw magazine - for fastening untreated wood or metal-backed drywall boards to metal
- Screw head type
- Phillips flat head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 2 screw magazine
- Description
- Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to wood
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- Collated drywall screw (zinc-plated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- Online training course providing practical knowledge on the safety features and risks when using electric saws, explaining how to better avoid hazards
- Target Group
- Workers, Installers, Foremen, HSE Managers
- Language
- English, German, Polish, Romanian, Turkish, French, Spanish, Portuguese, Dutch
- Duration
- 45 minutes
- Description
- Online training course providing practical knowledge on the risks caused by flying sparks from angle grinders, and how to help prevent them
- Target Group
- Workers, Installers, Foremen, HSE Managers
- Language
- English
- Duration
- 45 minutes
- Description
- Sealing for the DD-WC-SM water dam for core bit diameters from 24 mm (15/16") to 162 mm (6-3/8")
- Accessory type
- Sealing washers
- For use with
- DD 120, DD 150-U, DD 160, DD 200, DD 250, DD 250-CA, DD 350-CA, DD 500-CA
- Description
- Sealing for the DD-WC-ML water dam for core bit diameters from 24 mm (15/16") to 250 mm (9-13/16")
- Accessory type
- Sealing washers
- For use with
- DD 200, DD 250, DD 250-CA, DD 350-CA, DD 500-CA
- Description
- Sealing for the DD-WC-S water dam for core bit diameters from 8 mm (5/16") to 87 mm (3-7/16")
- Accessory type
- Sealing washers
- For use with
- DD 120, DD 150-U, DD 160, DD 200, DD 250, DD 250-CA, DD 350-CA, DD 500-CA
- Description
- Cut Assist autofeed unit to assist the drilling process with rig-based diamond coring systems – for use with the DD 250-CA
- For use with
- DD 250-CA
- Weight
- 9.26 lb
- Dimensions (LxWxH)
- 6.9 x 5.4 x 12.8 in
- Description
- Economical sleeve anchor (tie wire head)
- Head configuration
- Tie wire
- Environmental conditions
- Indoor, dry conditions
- Approvals / Test reports
- N/A
- Description
- Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to wood or metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- Node for assembling strut channels in a T shape, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- Accessory type
- Screws
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- For use with
- DST 20-CA
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- Accessory type
- Hand tools
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- Accessory type
- Flanges
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- Accessory type
- Flanges
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- Accessory type
- Flanges
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- Accessory type
- Flanges
- Description
- Cast-in anchor channels with upgraded load capacity and multiple embedment depths for economical fastening of curtain wall façades
- Material, corrosion
- Carbon Steel, Hot-Dip Galvanized
- PROFIS Software
- Yes
- Product type
- Anchor channel
- Description
- Omega shaped rail for the first layer of the substructure
- Width
- 110 mm
- Material composition
- EN AW-6063 T66
- Material thickness
- 2.0 mm
ultimate
- Description
- Ultimate non-woven belts to be used with the tube belt sander for fine grinding and finishing of stainless steel, steel, aluminum and other metals
- Product Class
- Ultimate
- Base material
- Stainless steel, Steel
- Description
- Autofeed unit to assist the drilling process with rig-based diamond coring systems – for use with the DD 350-CA and DD 500-CA
- For use with
- DD 350-CA, DD 500-CA
- Weight
- 9.92 lb
- Dimensions (LxWxH)
- 14.2 x 7.6 x 5.2 in
- Description
- Cleaner to remove uncured foam from most work surfaces, as well as from around the dispenser
No technical data available
- Description
- Calibration card for S-BT threaded screw-in studs to ensure the correct screw-in depth
No technical data available
- Description
- Calibration card for S-BT threaded screw-in studs to ensure the correct screw-in depth
No technical data available
- Description
- Durable asset tag to track construction equipment location and demand via the Hilti ON!Track tool tracking system – optimize your inventory and save time managing it
- Dimensions (LxWxH)
- 1.3 x 0.9 x 0.2 in
- Barcode type
- 2D barcode (Datamatrix ECC200)
- IP protection class
- IP 67 (IEC 60529)
- Description
- Node with pre-assembled Fast-Lock nut and bolt for assembling strut channels in a T shape
- Material composition
- S235JR, Q235B
- Material and coating
- Carbon steel - indoor coated
- Material thickness
- 4 mm
- Description
- Extension hose to be used together with the HIT-SZ piston plug for injectable hybrid/epoxy mortal
- Plug Diameter
- 12 - 35 mm
- Description
- Extension hose to be used together with the HIT-SZ piston plug for injectable hybrid/epoxy mortal
No technical data available
- Description
- Extension hose to be used together with the HIT-SZ piston plug for injectable hybrid/epoxy mortal
- Plug Diameter
- 20 - 55 mm
- Description
- Wedge-puller tool to quickly remove the compression wedge when retrofitting additional cables within a transit frame
- Temperature resistance range
- -40 - 122 °F
- Description
- Universal target plates to increase the measurement accuracy of laser meters over long ranges or on critical surfaces
- For use with (local pick)
- PM 2-L, PM 4-M, PR 2-HS, PR 30-HVS, PR 300-HV2S
- Product information
- Increases measuring range over long distances and in unfavorable lighting conditions. Dimensions: 130 x 120 mm, black
- Additional Accessory Information
- Increases measuring range over long distances and in unfavorable lighting conditions. Dimensions: 130 x 120 mm, black
- Description
- Node with pre-assembled Fast-Lock nut and bolt for assembling strut channels in a T shape, for outdoor use with low pollution
- Material composition
- S235JR, Q235B
- Material and coating
- Carbon steel - outdoor coated
- Material thickness
- 4 mm
- Description
- Inspection card S-IC BT for S-BT threaded screw-in studs to ensure the correct screw-in depth
No technical data available
- Description
- Soft washer for use with collated nails to attach waterproofing membrane to concrete or masonry
- Application
- Water proofing
- For use with (tools)
- BX 3, DX 351, DX 460, DX 5, DX 6, GX 120, GX 3
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor temporary applications
- Description
- Soft washer for use with collated nails to attach waterproofing membrane to concrete or masonry
- Application
- Water proofing
- For use with (tools)
- BX 3, DX 351, DX 460, DX 5, DX 6, GX 120, GX 3
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor temporary applications
- Description
- Clamp for channel-to-channel or channel-to-girder cross-connections with MT strut channel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Clamp for channel-to-channel or channel-to-girder cross-connections with MT strut channel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Clamp for channel-to-channel or channel-to-girder cross-connections with MT strut channel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Ceiling clip with ultimate-performance nail and pre-tied wire
- Application
- Acoustic ceiling
- Material
- Carbon steel
- Base materials
- Steel, Concrete (soft), Concrete (tough), Concrete (lightweight over metal deck)
- Description
- Adapter to allow post-installed water dams to be used with 2" CFS-DID drop-in devices
No technical data available
- Description
- Edge-of-slab water sealant for use with CFS-EOS QS preformed firestop – helping contractors to reduce delays caused by weather, while improving your productivity and reducing the risk of water damage
- Approvals
- Intertek
- Application
- Sealants
- Movement
- Yes
- Description
- Exchangeable chuck/adapter to simplify drilling and screwdriving in tight spaces using the SFE 2-A12 multi-head drill driver
- For use with
- SFE 2-A12
- Product information
- 13 mm (1/2”) keyless chuck – standard drill chuck for HSS, auger and spade bits, etc.
- Description
- Exchangeable chuck/adapter to simplify drilling and screwdriving in tight spaces using the SFE 2-A12 multi-head drill driver
- For use with
- SFE 2-A12
- Product information
- Hex bit holder – locking chuck for standard hex bits
- Description
- Exchangeable chuck/adapter to simplify drilling and screwdriving in tight spaces using the SFE 2-A12 multi-head drill driver
- For use with
- SFE 2-A12
- Product information
- Right-angle drill driver adapter – gives you additional reach when working with limited clearance
- Description
- Exchangeable chuck/adapter to simplify drilling and screwdriving in tight spaces using the SFE 2-A12 multi-head drill driver
- For use with
- SFE 2-A12
- Product information
- Offset chuck – you can drive screws straight-on with only 10 mm clearance from an adjacent surface
- Description
- Fastener guide used to fasten X-BT threaded studs with the BX 3-BT and BX 3-BTG battery-actuated tools
- Fastener Intake
- Threaded stud
- Description
- Fastener guide used to fasten X-BT threaded studs with the BX 3-BT and BX 3-BTG battery-actuated tools
- Fastener Intake
- Threaded stud
- Description
- Fastener guide used to fasten X-BT threaded studs with the BX 3-BT and BX 3-BTG battery-actuated tools
- Fastener Intake
- Threaded stud
- Description
- Fastener guide used to fasten X-BT threaded studs with the BX 3-BT and BX 3-BTG battery-actuated tools
- Fastener Intake
- Threaded stud