Search Results
1005
Products for "te70"
Filter
New
premium
- Description
- Collated nails for fastening plywood to steel framing using the BX 4 cordless nailer
- Base materials
- Steel
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Environmental Conditions
- Dry indoor
premium
- Description
- Collated nails for fastening plywood to steel framing using the GX 3 gas nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 3/16 in
- Corrosion protection
- Galvanized zinc coated <20 µm
premium
- Description
- Collated nails for fastening plywood to steel framing using the GX 2 gas nailer
- Base materials
- Steel
- Corrosion protection
- Galvanized zinc coated <20 µm
- Environmental Conditions
- Dry indoor
ultimate
- Description
- Collated nails for fastening plywood to steel framing using the GX 120 gas nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 3/16 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Software to assist the planning of sealing and fire protection around cables and pipes, in addition to a 3D PDMS Library
- Supported operating system
- Windows 10, Windows 7
- Security and authorizations
- Hilti signed software
- Description
- Foam positioning aid to center and align glass panes in the metal shoe, for use with the HIT-HY 270 adhesive anchor
No technical data available
- Description
- Ultimate-performance through-set undercut anchor for dynamic loads (sherardized steel)
- Material, corrosion
- Carbon steel, HDG (Hot-Dip Galvanized)/Sherardized
- Head configuration
- Externally threaded
- PROFIS Software
- No
- Description
- Cast-in accessory to allow the installation of a single-stack waste pipe aerator system
No technical data available
New
premium
- Description
- Collated nails for fastening to concrete and other base materials using the BX 4 cordless nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Environmental Conditions
- Dry indoor
premium
- Description
- Collated nails for fastening to concrete and other base materials using the BX 3 cordless nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
premium
- Description
- Collated nails for fastening to concrete and other base materials using the GX 3 gas nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Minimum thickness of base material (steel)
- 3/16 in
New
standard
- Description
- Collated nails for fastening to concrete and other base materials using the BX 4 cordless nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Environmental Conditions
- Dry indoor
standard
- Description
- Collated nails for fastening to concrete and other base materials using the GX 3 gas nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
standard
- Description
- Collated nails for fastening to concrete and other base materials using the BX 3 cordless nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
ultimate
- Description
- Collated nail for fastening metal decks to bar joists using the DX 9 powder-actuated nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 1/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
ultimate
- Description
- Collated nail for fastening metal decks to steel structures using the DX 9 powder-actuated nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 1/4 in
- Corrosion protection
- Galvanized zinc coated <20 µm
premium
- Description
- Single nail for fastening to concrete and other base materials using the BX 3 cordless nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
standard
- Description
- Collated nails for fastening to concrete and other base materials using the GX 2 gas nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
premium
- Description
- Collated nails for fastening to concrete and other base materials using the GX 2 gas nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
standard
- Description
- Collated nails for fastening to concrete and other base materials using the GX 120 gas nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
premium
- Description
- Collated nails for fastening to concrete and other base materials using the GX 120 gas nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Platform to simplify the placement of post-drill, cast-in firestop sleeves on corrugated metal decks
No technical data available
- Description
- Accessories for the DS TS20-E wall saw
No technical data available
- Description
- Accessories for the DS TS20-E wall saw
No technical data available
- Description
- Accessories for the DS TS20-E wall saw
No technical data available
- Description
- Accessories for the DS TS20-E wall saw
No technical data available
- Description
- Accessories for the DS TS20-E wall saw
No technical data available
- Description
- Stud- or surface-mounted gangplate to increase the capacity of firestop speed sleeves and simplify cable management
- Maximum wall thickness
- 300
- Product Class
- Ultimate
- Application temperature range
- 23 - 122 °F
- Description
- Galvanized beam clamp for connecting the open side or back of strut channels directly to steel beams
- Material composition
- S355 MC - DIN EN 10149-2, Screw: strength class 8.8, Plastic: PA 6.6
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- 24" Continuous core bit barrels
- For use with
- DD 200, DD 350-CA, DD 500-CA
- Base materials
- Concrete
- Wet or dry operation
- Wet
- Description
- 48" Continuous core bit barrels
- For use with
- DD 200, DD 350-CA, DD 500-CA
- Base materials
- Concrete
- Wet or dry operation
- Wet
- Description
- DD-B 12" long threaded barrel sections
- For use with
- DD 200, DD 350-CA, DD 500-CA
- Base materials
- Concrete
- Drilling Mode
- N/A
- Description
- Metal pipe clamp mount with pre-installed threaded stud for light-duty electrical/mechanical fastenings on ceilings and use with collated nails
- Base materials
- Concrete, Steel
- Environmental Conditions
- Dry indoor
- Material
- Carbon steel
New
premium
- Description
- Insulation fastener for installing continuous insulation directly to cold-formed steel stud framing without the use of sheathing
- Application
- Rigid Board Insulation
- Insulation material
- Hard board (e.g. XPS, PUR, PIR), Mineral wool
- Base materials
- Steel
- Description
- Collated drywall screw (Kwik-cote coated) for the SD-M 2 screw magazine – for fastening drywall boards to wood
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 2 screw magazine
- Description
- Flat T channel connector for fastening two MT strut channels together
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Nuron
- Description
- Ultimate 22V Li-ion battery built to boost the performance and run time of heavy-duty Nuron power tools
- Weight
- 2.88 lb
- Dimensions (LxWxH)
- 6.1 x 3.4 x 3 in
- Working temperature range
- 1 - 140 °F
- Description
- Allows water collector systems to be fixed to a drill stand – compatible with the WMS 100 water management system
- Product information
- Water collection system for handheld applications for DD 150-U
- For use with
- DD 150-U
- Additional Accessory Information
- Water collection system for handheld applications for DD 150-U
- Description
- Allows water collector systems to be fixed to a drill stand – compatible with the WMS 100 water management system
- Product information
- Water collector holder for DD-ST 120, DD-ST 150 and DD-ST 160 drill stands
- For use with
- DD 120, DD 150-U, DD 160
- Additional Accessory Information
- Water collector holder for DD-ST 120, DD-ST 150 and DD-ST 160 drill stands
- Description
- Allows water collector systems to be fixed to a drill stand – compatible with the WMS 100 water management system
- Product information
- Water collector holder for DD-HD 30 drill stand
- For use with
- DD 200, DD 250, DD 250-CA, DD 350-CA, DD 500-CA
- Additional Accessory Information
- Water collector holder for DD-HD 30 drill stand
- Description
- Online training course providing practical knowledge of the risks when using drilling and demolition equipment, and how to help prevent them
- Target Group
- Workers, Operators, Installers, Foremen, HSE Managers
- Language
- English, German, Polish, Romanian, Turkish, French, Spanish, Portuguese, Dutch, Swedish, Slovene
- Duration
- 45 minutes
- Description
- Collated drywall screw (zinc-plated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- #3 pilot point screw for the SD-M 2 screw magazine - for fastening untreated wood or metal-backed drywall boards to metal
- Screw head type
- Phillips flat head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 2 screw magazine
- Description
- Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to wood
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- Collated drywall screw (zinc-plated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- Online training course providing practical knowledge on the safety features and risks when using electric saws, explaining how to better avoid hazards
- Target Group
- Workers, Installers, Foremen, HSE Managers
- Language
- English, German, Polish, Romanian, Turkish, French, Spanish, Portuguese, Dutch, Swedish, Slovene
- Duration
- 45 minutes
- Description
- Online training course providing practical knowledge on the risks caused by flying sparks from angle grinders, and how to help prevent them
- Target Group
- Workers, Installers, Foremen, HSE Managers
- Language
- English, Spanish, French, German, Dutch, Swedish, Slovene, Romanian, Portuguese, Polish, Turkish
- Duration
- 45 minutes
- Description
- Node for assembling strut channels in a T shape
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Flat T channel connector for fastening two MT strut channels together, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
Nuron
- Description
- Top-performance 22V Li-ion battery to maximize the output and run time of heavy-duty Nuron hammer drilling and cutting tools
- Weight
- 4.05 lb
- Dimensions (LxWxH)
- 6.1 x 3.4 x 3.9 in
- Working temperature range
- 1 - 140 °F
- Description
- Sealing for the DD-WC-S water dam for core bit diameters from 8 mm (5/16") to 87 mm (3-7/16")
- For use with
- DD 120, DD 150-U, DD 160, DD 200, DD 250, DD 250-CA, DD 350-CA, DD 500-CA
- Description
- Sealing for the DD-WC-SM water dam for core bit diameters from 24 mm (15/16") to 162 mm (6-3/8")
- For use with
- DD 120, DD 150-U, DD 160, DD 200, DD 250, DD 250-CA, DD 350-CA, DD 500-CA
- Description
- Sealing for the DD-WC-ML water dam for core bit diameters from 24 mm (15/16") to 250 mm (9-13/16")
- For use with
- DD 200, DD 250, DD 250-CA, DD 350-CA, DD 500-CA
- Description
- Cut Assist autofeed unit to assist the drilling process with rig-based diamond coring systems – for use with the DD 250-CA
- For use with
- DD 250-CA
- Weight
- 9.26 lb
- Dimensions (LxWxH)
- 6.9 x 5.4 x 12.8 in
- Description
- Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to wood or metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- Cut Assist autofeed unit to assist the drilling process with rig-based diamond coring systems – for use with the DD 150-U (03)
- For use with
- DD 150-U
- Weight
- 9.26 lb
- Dimensions (LxWxH)
- 6.9 x 5.4 x 12.8 in
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
No technical data available
- Description
- Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws
- For use with
- DST 20-CA