Profis includes some non-Hilti products as anchor options (i.e. hex head, heavy hex head, embed plate, etc.). When these options are selected, the solutions include the following "cast in place installation per MPII". Where is the technical details on how these are to be installed shown? And what is MPII?
Hi Jeff,
MPII refers to the "Manufacturer's Published Installation Instructions." When PROFIS includes non-Hilti anchor options (such as hex head bolts, heavy hex head anchors, embed plates, etc.), the note “cast-in-place installation per MPII” indicates that the anchor is not manufactured by Hilti and that Hilti does not provide installation instructions or product-specific technical details for those items.
If you have any further questions, please reach out to hnatechnicalservices@hilti.com.
Best,
Mia
So Profis will analyze these products, but we don't get enough information to confirm the details? My specific question was for a cast-in bolt, where is the "embedment" dimensions taken - to extreme end of the bolt, or to the underside of the bolt head (where the bearing in tension occurs). And there would similar pretty straightforward dimensional questions the embed plate with headed stud condition. The program must be using the embedment depth variable to define some of these dimensions used in the calculations, though it is just not clearly defined how.