I am using PROFIS for a typical baseplate in concrete. I noticed that for a TZ2 mechanical bolt w/ 5/8" diameter not all embedment options are available. Specifically, no bolt with hef larger than 4" is available as an option. However, on the product website, the maximum bolt length for a 5/8" bolt diameter is 10". Is there any way to port all of the available product lengths?
Hi Miguel,
Based on Table 1 in ESR-4266, Hilti has tested for three different effective embedment depths for the 5/8" KB-TZ2 with the deepest embedment being 4". The reason for the varying lengths of the KB-TZ2 is due to the ability to fasten down fixtures of varying thicknesses. Information on these thickness requirements can be found on page 328 of Hilti's Anchor Fastening Product Technical Guide.
Regards,
Ashley