Skip to main content
Cart
ProductsSolutionsEngineering CenterSupport and DownloadsCompany
Cart

In the Decking 201 Webinar it was stated spot welds cannot be made in (4) plies of deck. I understood that the parameter is based on total thickness of plies(0.15") and not number plies. Can you refer me to the standard that limits the number of plies?

Posted by Aaron C Hellamalmost 4 years ago
In the Decking 201 Webinar it was stated spot welds cannot be made in (4) plies of deck. I understood that the parameter is based on total thickness of plies(0.15") and not number plies. Can you refer me to the standard that limits the number of plies?

Deck Fastening webinar

Deck,Fastening
1 Reply
Posted by Emily almost 4 years ago

Hi Aaron,

For information on the 4 Layer condition for Hilti’s power-actuated fasteners, see Section 4.2 on page 2 of ESR-2776. For further technical assistance within North America, please contact hnatechnicalservices@hilti.com.

Regards,
Emily