Posted by Robert Hutchinsoabout 4 years ago
1/2" Has-E Anchors
I am inquiring as to what the hole tolerances are for has E anchors. The spec calls for 9/16 but is 5/8 within tolerance?
1 Reply
Posted by Ashley Couronabout 4 years ago
Hi Robert,
Depending on the adhesive anchor that you are installing, Hilti has some limited published testing for anchors installed into larger holes. Please refer to Hilti’s Technical Bulletin for HIT-RE 500 V3 with Large Annular Gap for technical information regarding installation into larger holes.
Regards,
Ashley