Skip to main content
Hilti
  1. Home
  2. Products
  3. Modular Support Systems
  4. Hot-Dip Galvanized Products

Heavy-duty channel system (MI)

Hilti's strongest heavy-duty channel system saving time and increasing productivity in various applications

All prices discounted net
Hilti's strongest heavy-duty channel system saving time and increasing productivity in various applications
Filter Start Over
Product type
Base material type
42 Products
All prices discounted net
All prices discounted net

MI girder

Hot-dip galvanized (HDG) installation girders for constructing adjustable, heavy-duty MEP supports and modular 3D structures
  • Material composition: DD11 MOD – HN 555-4, S235JR – EN10025-2
  • Surface finish: Hot-dip galvanized, 75µm - DIN EN ISO 1461
From $715.00

MIC-C90-DH

Hot-dip galvanized (HDG) bracket to concrete for heavy-duty applications
  • Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025;Baseplate : ASTM A36
  • Surface finish: HDG: min 75 µm - ASTM A123
From $270.00

MIC-C120-DH

Hot-dip galvanized (HDG) bracket to concrete for heavy-duty applications
  • Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025, Baseplate : ASTM A36
  • Surface finish: HDG: min 75 µm - ASTM A123
From $402.00

MIC-S90H

Hot-dip galvanized (HDG) bracket for heavy-duty fastenings to steel
  • Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025, Baseplate : ASTM A36
  • Surface finish: HDG: min 75 µm - ASTM A123
From $338.00

MIC-S120H

Hot-dip galvanized (HDG) bracket for heavy-duty fastenings to steel
  • Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025, Baseplate : ASTM A36
From $382.00

MIC-C-AA

Hot-dip galvanized (HDG) baseplate for fastening MI-90 girders to concrete using two anchors
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 62 ft-lbf
$305.00

MIC-C-DH

Hot-dip galvanized (HDG) baseplate for fastening MI-90 girders to concrete for heavy-duty applications
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 62 ft-lbf
From $573.01

MIC-C-UH

Connector for fastening MI girders to concrete
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 62 ft-lbf
$227.00

MIC-CU-MAH

Hot-dip galvanized (HDG) connector for fastening girders directly to concrete at angles between 0 and 180 degrees
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 62 ft-lbf
$327.00

MIB-CDH

Hot-dip galvanized (HDG) baseplate for fastening MI girders to concrete
  • Material composition: S235JR - DIN EN 10025-2
  • Surface finish: HDG - EN ISO 1461
$548.00

MIC-S

Connector (steel)
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 62 ft-lbf
Error occurred

Please contact us.

MIC-SH Baseplate (for MI-90)

Hot-dip galvanized (HDG) baseplate for fastening MI-90 girders to steel for heavy-duty applications
  • Material composition: Connector: S235 - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 62 ft-lbf
From $449.00

MIC-SH Baseplate (for MI-120)

Hot-dip galvanized (HDG) baseplate for fastening MI-120 girders to steel for heavy-duty applications
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 62 ft-lbf
From $504.00

MIB-SH

Hot-dip galvanized (HDG) baseplate for fastening MI girders to steel
  • Material composition: S235JR - DIN EN 10025-2
  • Surface finish: HDG: min 55 µm - DIN EN ISO 1461
From $339.00

MI-DGC

Hot-dip galvanized (HDG) double beam clamp for connecting MI girders to steel beams for heavy-duty applications
  • Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt 48 µm - DIN EN ISO 10684; Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 62 ft-lbf
From $314.00

MI-SGC M12

Hot-dip galvanized (HDG) single beam clamp for connecting MIQ steel baseplates to steel beams
  • Thread connection - M: M12
  • Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
$353.00

MI-SGC M16

Hot-dip galvanized (HDG) single beam clamp for connecting MI steel baseplates to steel beams
  • Thread connection - M: M16
  • Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
$288.00

MIC-SC

Hot-dip galvanized (HDG) connector used with MI baseplates that allow for free positioning of the girder
  • Material composition: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2
  • Surface finish: None (primer coating-basic connector)
$136.00

MIC-E

Hot-dip galvanized (HDG) connector used to connect MI girders longitudinally for long spans in heavy-duty applications
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 62 ft-lbf
From $419.00

MIC-UH

Standard hot-dip galvanized (HDG) connector for fastening MI girders to one another
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Backing plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Backing plate, Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 62 ft-lbf
From $458.00

MIC-BA /H

Ultimate hot-dip galvanized (HDG) connectors offering highest versatility within the MI modular system
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Backing plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Tooth Plate: S235 - EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Backing plate, Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 62 ft-lbf
From $343.00

MIC-T

Hot-dip galvanized (HDG) connector for fastening MI girders perpendicularly to one another
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Tooth plate: S235 - EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 62 ft-lbf
$322.00

MIC-L

Hot-dip galvanized (HDG) connector for fastening MI girders perpendicularly to one another
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Backing plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Tooth plate: S235 - EN10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Backing plate, Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
  • Set: Yes
$422.00

MIC-90-LH

Hot-dip galvanized (HDG) connector offering highest load capacity within the MI and MIQ modular system
  • Material composition: S235JR - DIN EN 10025-2
  • Surface finish: HDG: 55 µm - DIN EN ISO 1461
  • Set: Yes
$493.00

MIC-U-MA

Hot-dip galvanized (HDG) multi-angle connector used with MIC-MAH connectors for fastening MI girders to one another at an angle
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Tooth plate: S235 - EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 62 ft-lbf
$322.00

MIC MAH

Hot-dip galvanized (HDG) multi-angle connector for fastening MI girders to steel beams at an angle
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 62 ft-lbf
From $487.00

MIA-EC

Girder end cap for safer and neater covering of MI and MIQ girder ends
  • Material composition: Moplen EP 240H
  • Temperature resistance: -22 - 194 °F
From $86.25

MIC-MI/MQ-X

Hot-dip galvanized (HDG) connector for fastening MQ strut channels perpendicular to MI girders
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 40 µm - DIN EN ISO 10684
  • Tightening torque: 37 ft-lbf
$696.00

MIA-EH

Hot-dip galvanized (HDG) screw with an integrated toothed plate for easier fastening and one-handed adjustment of MI and MIQ connectors
  • Material composition: Bolt: Steel grade 8.8; Tooth plate: S235 - EN 10025-2
  • Surface finish: HDG: 45 µm - DIN EN ISO 1461
  • Tightening torque: 62 ft-lbf
From $132.00

MIA-EH-P

Hot-dip galvanized (HDG) plate for easier fastening and one-handed adjustment of MI and MIQ connectors
  • Material composition: Plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Spring: EN 10270-3
  • Surface finish: HDG: 45 µm - DIN EN ISO 1461
$163.00

MIA-OH

Hot-dip galvanized (HDG) screw for easier fastening and one-handed adjustment of MI and MIQ connectors
  • Material composition: Steel grade 8.8
  • Surface finish: HDG: 45 µm - DIN EN ISO 10684
  • Tightening torque: 62 ft-lbf
From $77.50

MIA-TP

Hot-dip galvanized (HDG) tooth plate used with the MIA-OH bolt for fastening of MI and MIQ connectors
  • Material composition: S235 - EN 10025-2
  • Surface finish: HDG: 45 µm - DIN EN ISO 1461
$99.95

M12-F-SL-WS 3/4"

Hot-dip galvanized (HDG) hexagon nut with self-locking mechanism used with all MI connectors
  • Material composition: Steel grade 8
  • Surface finish: HDG: 45 µm - DIN EN ISO 1461
  • Tightening torque: 62 ft-lbf
$219.00

MIC-PS/MIC-PSP

Hot-dip galvanized (HDG) connector for fastening pipe shoes to MI girders for heavy-duty applications with expansion
  • Material composition: U-bolt: Steel grade 8.8; Plate: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Nut: Steel grade 8
  • Surface finish: HDG: U-bolt, Nut 45 µm - DIN EN ISO 1461; Plate: 55 µm - DIN EN ISO 1461
  • Tightening torque: 44 ft-lbf
$322.00

MIC-TRC

Hot-dip galvanized (HDG) connector for fastening M12 (1/2") and M20 (3/4") threaded rods to MI girders
  • Material composition: Connector, Square washer: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector, Square washer 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
  • Tightening torque: 51 ft-lbf
From $101.00

MP-US OC

New product
Premium
Outdoor coated (OC) pipe straps for universal piping applications
  • Material composition: DX51D-ZM300 - EN 10346:2015
  • Surface finish: Zinc-Magnesium coating
  • Product Class: Premium
From $14.25

MP-UB OC (imperial)

New product
Standard
Outdoor coated (OC) U-bolts for universal piping applications
  • Fire resistance ( Yes/No): No
  • Material composition: Q235 or better steel
  • Surface finish: Hot-dip galvanized, 45 µm - DIN EN ISO 1461
From $17.50

MIC-UB

Hot-dip galvanized (HDG) connector for fastening U-bolts to MI girders
  • Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Washer: DIN EN ISO 7089; Bolt: Steel grade 8.8; Nut: Steel grade 8
  • Surface finish: HDG: Connector, Square washer 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
  • Wrench size: 19 mm
From $260.00

MIA-BO

Hot-dip galvanized (HDG) U-bolt for fastening pipe shoes to MI girders
  • Material composition: U-bolt: Steel grade 8.8 - ISO 898-1; Nut: Steel grade 8
  • Surface finish: HDG: 48 µm - DIN EN ISO 10684
  • Tightening torque: 62 ft-lbf
From $333.00

MIC-PG

Insert to reduce friction when fastening pipe shoes and U-bolts to MI girders
  • Material composition: Plate: PE-UH MW; Anchor: PA
  • Temperature resistance: -328 - 194 °F
  • Coefficient of sliding friction: 0.15
$216.00

HDG grade 8 hexagon nut DIN 934

Hot-dip galvanized (HDG) grade 8 hexagon nut corresponding to DIN 934
  • Material composition: Steel grade 8
  • Surface finish: Hot-dip galvanized - DIN EN ISO 10684
  • Base material type: n/a
From $7.75
Back to products ()
Compare
Products ()
Log in to proceed
Register now
Contact us
Contact
Call us
Call us
You can reach us toll free at:
1-800-879-8000
Español: 1-800-879-5000
US Export Sales: 1-800-950-6163
Customer Service hours of operation:
Let us call you back
Request callback
Call back currently not available

We can call you during our business hours:

Mon 8:00 AM - 5:00 PM CDT
Tue 8:00 AM - 5:00 PM CDT
Wed 8:00 AM - 5:00 PM CDT
Thu 8:00 AM - 5:00 PM CDT
Fri 8:00 AM - 5:00 PM CDT
Live chat with us
Chat with us
Live chat currently not available

You can reach our live chat during business hours:

Mon 8:00 AM - 5:00 PM CDT
Tue 8:00 AM - 5:00 PM CDT
Wed 8:00 AM - 5:00 PM CDT
Thu 8:00 AM - 5:00 PM CDT
Fri 8:00 AM - 5:00 PM CDT
Send us a message
Send us a message
Use the following form to send us your request.
* Required fields
You will receive an copy of your message.
* Required fields
Looking for a Hilti Store? Find a Hilti Store
Added to cart
Added to cart
Go to shopping cart

Hilti = registered trademark of Hilti Corporation, 9494 Schaan, Liechtenstein
© 2009-2016, Right of technical and program changes reserved, S.E. & O.

Hilti USA
Service Hotline: (800) 879-8000