Hot-Dip Galvanized

MQK-21-F

Hot-dip galvanized (HDG) bracket for medium-duty applications

• Material thickness: Channel: 2 mm, baseplate: 6 mm
• Material composition: S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153

$138.00

Compare (1)

MQK-41-F

Hot-dip galvanized (HDG) bracket with a 41 mm high, single MQ strut channel for medium-duty applications

• Material thickness: Channel: 2 mm, baseplate: 8 mm
• Material composition: S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153

From $52.95

Compare (1)

MQK-41 D-F

Hot-dip galvanized (HDG) double bracket for medium-duty applications

• Material thickness: Channel: 2 mm, baseplate: 10 mm
• Material composition: S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153

$183.00

Compare (1)

MQK-S-F

Hot-dip galvanized (HDG) angle brace for brackets

• Material thickness: 3 mm
• Material composition: S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153

$545.00

Compare (1)

MQN-HDG plus

Hot-dip galvanized (HDG) channel connector for joining any elements with a butterfly opening

• Tightening torque: 30 ft-lbf
• Material composition: Bolt: M10 grade 8.8 - DIN ISO 898, Nut: C4C - DIN EN 10263, Plate: DD11 - DIN EN 10111
• Surface finish: Multi-layer coating – performance in salt spray test equal to hot dipped galvanizing

$491.00

Compare (1)

MQA-F

Hot-dip galvanized (HDG) pipe clamp saddle for connecting threaded components (imperial) to MQ strut channels

• Material composition: Nut: C4C - EN 10263-2, Plate: S235JR - EN 10025-2, Plastic: PBT
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153

From $186.00

Compare (1)

MQM-F

Hot-dip galvanized (HDG) wing nut for connecting modular support system components

• Material composition: Wings: Plastic PA, Nut: C4C - DIN EN 10263
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
• Weight: 0.07 lb.

From $84.95

Compare (1)

MQZ-F

Hot-dip galvanized (HDG) bored plate for trapeze assembly and anchoring (imperial)

• Material composition: S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
• Weight: 0.19 lb.

From $52.25

Compare (1)

MQW 90°-F

Angle HDG

• Material composition: S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
• Material thickness: 4 mm

From $86.75

Compare (1)

MQW 45°/135°-F

Hot-dip galvanized (HDG) 45- or 135-degree angle for connecting multiple MQ strut channels

• Material composition: S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
• Number of holes: 8

$180.00

Compare (1)

MQV-F

Hot-dip galvanized flat channel connector used as a longitudinal extender for MQ strut channels

• Material composition: S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
• Material thickness: 4 mm

$65.25

Compare (1)

MQV-F

Hot-dip galvanized channel connector used as a longitudinal extender for MQ strut channels

• Material composition: S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
• Material thickness: 4 mm

$165.00

Compare (1)

MQV 2/2 D-F

Hot-dip galvanized channel foot for fastening strut channels to concrete

• Material composition: S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
• Material thickness: 4 mm

$172.00

Compare (1)

MQV-2D-F

Hot-dip galvanized (HDG) channel connector for two-dimensional structures

• Material composition: S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
• Material thickness: 4 mm

$317.00

Compare (1)

MQP-1-F

Hot-dip galvanized (HDG) channel foot for fastening channels to concrete in light/medium-duty applications

• Material composition: S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
• Material thickness: 4 mm

$80.50

Compare (1)

MQP-45-F

Hot-dip galvanized (HDG) channel foot for fastening channels to concrete at an angle

• Material composition: S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
• Material thickness: 4 mm

$171.00

Compare (1)

MQP-F

Hot-dip galvanized (HDG) channel foot for fastening channels to concrete

• Material composition: S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
• Material thickness: Channel connector: 4 mm, baseplate: 6 mm

$727.00

Compare (1)

MQT-F

Hot-dip galvanized (HDG) beam clamp for connecting MQ strut channels directly to steel beams

• Wrench size: 13 mm
• Tightening torque: 7 ft-lbf
• Material composition: U-bolt: S235JRG2 - DIN EN 10025

$179.00

Compare (1)

MQB-F

Hot-dip galvanized (HDG) clamp for fastening MQ strut channels to concrete

• Material composition: S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
• Material thickness: 4 mm

$85.50

Compare (1)

HS

Installation channel 13/16" - 12 ga HDG

• Material composition: Carbon steel
• Height: 13/16 in
• Slot length: 2-1/2 in

From $88.50

Compare (1)

HS

Installation channel 1 5/8" - 12 ga HDG

• Material composition: Carbon steel
• Surface finish: Hot-dip galvanized - ASTM A123
• Height: 1-5/8 in

From $77.75

Compare (1)

HS

Installation channel B2B 1 5/8" - 12 ga HDG

• Material composition: Carbon steel
• Surface finish: Hot-dip galvanized - ASTM A123
• Height: 3-1/4 in

$114.00

Compare (1)

HS

Installation channel B2B 2 7/16" - 12 ga (HDG)

• Material composition: Carbon steel
• Surface finish: Hot-dip galvanized - ASTM A123
• Height: 4-7/8 in

$214.00

Compare (1)

MEK

Channel end cap

• Surface finish: n/a
• Weight: 0.01 lb.

From $50.75

Compare (1)

MIQ New

Girder

• Height: 3.5 in
• Material composition: S275JR - EN 10025
• Surface finish: Hot-dip galvanized, 65 µm - ASTM A123

From $366.00

Compare (1)

MIQC-C New

Hot-dip galvanized (HDG) baseplate for fastening MIQ girders to concrete for heavy-duty applications

• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized 55 µmDIN EN ISO 1462
• Tightening torque: 62 ft-lbf

From $96.75

Compare (1)

MIQB-S New

Hot-dip galvanized (HDG) baseplate for fastening MIQ girders to steel

• Material composition: D11 MOD - HN 547, S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized 55 µmDIN EN ISO 1462

From $145.00

Compare (1)

MIQC-S New

Hot-dip galvanized (HDG) baseplate for fastening MIQ girders to steel for heavy-duty applications

• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized 55 µmDIN EN ISO 1462

From $209.00

Compare (1)

MI-DGC

Hot-dip galvanized (HDG) double beam clamp for connecting MI girders to steel beams for heavy-duty applications

• Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 62 ft-lbf

From $249.00

Compare (1)

MIQC-L New

Hot-dip galvanized (HDG) medium-duty connectors to connect two MIQ girders

• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized 55 µmDIN EN ISO 1462
• Tightening torque: 62 ft-lbf

$249.00

Compare (1)

MIQC-H New

Hot-dip galvanized (HDG) heavy-duty connectors to connect two MIQ girders

• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
• Surface finish: Hot-dip galvanized 55 µmDIN EN ISO 1462
• Set: Yes

From $177.00

Compare (1)

MIQC-E New

Hot-dip galvanized (HDG) connector used to connect MIQ girders longitudinally for long spans in heavy-duty applications

• Material composition: DD11 MOD - HN 547, S275JR - DIN EN 10025
• Surface finish: Hot-dip galvanized 55 µm DIN EN ISO 1462
• Set: Yes

$222.00

Compare (1)

MIQA-T New

T-head bolt

• Tightening torque: 62 ft-lbf
• Material composition: Bolt: grade 8.8 - DIN EN ISO 898, Plastic: PBT
• Surface finish: Hot-dip galvanized, 45 µm - DIN EN ISO 1461

$175.00

Compare (1)

MIQM New

Wing nut

• Material composition: Nut: C4C - DIN EN 10263, Plastic: PA 6.6
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153

From $152.00

Compare (1)

MI

Hot-dip galvanized (HDG) installation girders with greater adjustability for heavy-duty applications

• Material composition: DD11 MOD - HN 555, S235JR - EN 10025
• Surface finish: Hot-dip galvanized, 75 µm - ASTM A123

From $498.00

Compare (1)

MIC-C90-DH New

Hot-dip galvanized (HDG) bracket to concrete for heavy-duty applications

• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025;Baseplate : ASTM A36
• Surface finish: HDG: min 75 µm - ASTM A123

From $229.00

Compare (1)

MIC-C120-DH New

Hot-dip galvanized (HDG) bracket to concrete for heavy-duty applications

• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025, Baseplate : ASTM A36
• Surface finish: HDG: min 75 µm - ASTM A123

From $348.00

Compare (1)

MIC-S90H New

Hot-dip galvanized (HDG) bracket for heavy-duty fastenings to steel

• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025, Baseplate : ASTM A36
• Surface finish: HDG: min 75 µm - ASTM A123

From $279.00

Compare (1)

MIC-S120H New

Hot-dip galvanized (HDG) bracket for heavy-duty fastenings to steel

• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025, Baseplate : ASTM A36

From $331.00

Compare (1)

MIC-C-AA/-D

Hot-dip galvanized (HDG) baseplate for fastening MI-90 girders to concrete using two anchors

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 62 ft-lbf

$242.00

Compare (1)

MIC-C-DH New

Hot-dip galvanized (HDG) baseplate for fastening MI-90 girders to concrete for heavy-duty applications

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 62 ft-lbf

From $455.00

Compare (1)

MIC-C-UH New

Connector (concrete)

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 62 ft-lbf

$179.00

Compare (1)

MIB-CDH New

Hot-dip galvanized (HDG) baseplate for fastening MI girders to concrete

• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025

$465.00

Compare (1)

MIC-S

Connector (steel)

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 62 ft-lbf

$332.00

Compare (1)

MIC-SH New

Hot-dip galvanized (HDG) baseplate for fastening MI-90 girders to steel for heavy-duty applications

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 62 ft-lbf

From $356.00

Compare (1)

MIC-SH New

Hot-dip galvanized (HDG) baseplate for fastening MI-120 girders to concrete for heavy-duty applications

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 62 ft-lbf

From $400.00

Compare (1)

MIB-SH New

Hot-dip galvanized (HDG) baseplate for fastening MI girders to steel

• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
• Surface finish: HDG: min 55 µm - DIN EN ISO 1461

From $269.00

Compare (1)

MI-SGC M16 New

Hot-dip galvanized (HDG) single beam clamp for connecting MI steel baseplates to steel beams

• Thread - M: M16
• Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461

$229.00

Compare (1)

MIC-CU-MAH New

Hot-dip galvanized (HDG) connector for fastening girders directly to concrete at angles between 0 and 180 degrees

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 62 ft-lbf

$259.00

Compare (1)

MIC-SC

Hot-dip galvanized (HDG) connector used with MI baseplates that allow for free positioning of the girder

• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
• Surface finish: None (primer coating-basic connector)

$108.00

Compare (1)

MIC-UH New

Standard hot-dip galvanized (HDG) connector for fastening MI girders to one another

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Backing plate, Tooth plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Backing plate, Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 62 ft-lbf

From $364.00

Compare (1)

MIC-BA /H New

Ultimate hot-dip galvanized (HDG) connectors offering highest versatility within the MI modular system

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Backing plate, Tooth plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Backing plate, Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 62 ft-lbf

From $272.00

Compare (1)

MIC-T

Hot-dip galvanized (HDG) connector for fastening MI girders perpendicularly to one another

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Tooth plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 62 ft-lbf

$255.00

Compare (1)

MIC-L

Hot-dip galvanized (HDG) connector for fastening MI girders perpendicularly to one another

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Backing plate, Tooth plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Backing plate, Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
• Set: Yes

$335.00

Compare (1)

MIC-90-LH New

Hot-dip galvanized (HDG) connector offering highest load capacity within the MI and MIQ modular system

• Material composition: C30 - DIN EN 10250-2
• Surface finish: HDG: 55 µm - DIN EN ISO 1461
• Set: Yes

$391.00

Compare (1)

MIC-U-MA

Hot-dip galvanized (HDG) multi-angle connector used with MIC-MAH connectors for fastening MI girders to one another at an angle

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Tooth plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 62 ft-lbf

$255.00

Compare (1)

MIC MAH New

Hot-dip galvanized (HDG) multi-angle connector for fastening MI girders to steel beams at an angle

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 62 ft-lbf

From $386.00

Compare (1)

MIA-EC

Girder end cap for safer and neater covering of MI and MIQ girder ends

• Material composition: Moplen EP 240H
• Temperature resistance: -22 - 194 °F

From $68.50

Compare (1)

MIC-E

Hot-dip galvanized (HDG) connector used to connect MI girders longitudinally for long spans in heavy-duty applications

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 62 ft-lbf

From $333.00

Compare (1)

MIA-OH

Hot-dip galvanized (HDG) screw for easier fastening and one-handed adjustment of MI and MIQ connectors

• Material composition: Steel grade 8.8
• Surface finish: HDG: 45 µm - DIN EN ISO 1461
• Tightening torque: 62 ft-lbf

From $61.50

Compare (1)

MIA-EH

Hot-dip galvanized (HDG) screw with an integrated toothed plate for easier fastening and one-handed adjustment of MI and MIQ connectors

• Material composition: Bolt: Steel grade 8.8; Tooth plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562
• Surface finish: HDG: 45 µm - DIN EN ISO 1461
• Tightening torque: 62 ft-lbf

From $105.00

Compare (1)

M12-F-SL-WS 3/4"

Hot-dip galvanized (HDG) hexagon nut with self-locking mechanism used with all MI connectors

• Material composition: Steel grade 8
• Surface finish: HDG: 45 µm - DIN EN ISO 1461
• Tightening torque: 62 ft-lbf

$175.00

Compare (1)

MIA-TP

Hot-dip galvanized (HDG) tooth plate used with the MIA-OH bolt for fastening of MI and MIQ connectors

• Material composition: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562
• Surface finish: HDG: 45 µm - DIN EN ISO 1461

$79.25

Compare (1)

MIA-EH-P

Hot-dip galvanized (HDG) plate for easier fastening and one-handed adjustment of MI and MIQ connectors

• Material composition: Plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; Spring: 1.4319 AISI 302, 1.4310 DIN EN 10088
• Surface finish: HDG: 45 µm - DIN EN ISO 1461

$129.00

Compare (1)

MIC-MI/MQ-X

Hot-dip galvanized (HDG) connector for fastening MQ strut channels parallel to MI girders

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 40 µm - DIN EN ISO 10684
• Tightening torque: 37 ft-lbf

$558.00

Compare (1)