Search Results
648
Products for "HIT-HY 200 V3"
Filter
- Description
- Premium Asphalt over Concrete blade designed for fast cutting on low horsepower saws
- Tool type
- Floor saw
- Base material
- Asphalt over Concrete
- Arbor size
- 1 in
- Description
- Setting tool for internally threaded sleeves
No technical data available
- Description
- Vertical fiberglass bracket - Medium
- Material composition
- Polyamide, EN AW-6063 T66
- Width
- 62 mm
- Height
- 80 mm
- Description
- Base connector for anchoring 3D, heavy-duty MT-90 girder structures to concrete in outdoor environments with low to moderate pollution (C3)
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 3 mm
- Description
- Hot-dip galvanized (HDG) flat washer corresponding to ISO 7089
- Material composition
- Steel - DIN EN ISO 7089
- Surface finish
- Outdoor Coated - HDG
- Load range
- Light duty
- Description
- Hard-sided carrying case for storing and transporting your Hilti concrete saw or slitting tool and its accessories
- Types
- Individual tool cases
- Compatible with
- Concrete saws
- Dimensions (LxWxH)
- 29.9 x 20.9 x 10.2 mm
Nuron
- Description
- Cordless 6-Ton dieless crimper for crimping cables up to 500 kcmil │ 240 mm² (Nuron battery platform)
- Crimping capacity
- 10-240 mm² Al (fine stranded), 10-240 mm² Al (stranded), 10-240 mm² Cu (fine stranded), 10-240 mm² Cu (stranded)
- Dimensions (LxWxH)
- 4.6 x 3 x 14.9 in
- Battery System
- Nuron
- Description
- Optical level for everyday leveling tasks with 20x magnification
- Magnification
- 20 x
- Compensator type
- Air-damping
- IP protection class
- IP 55 (EN 60529)
- Description
- Economical, multiple-use replacement coils for reusing HCA coil anchors in a new drill hole
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- N/A
- Base materials
- Concrete (uncracked)
- Description
- High-pressure gas can for use with the GX 3 gas nailer
- For use with (tools)
- GX 3, GX 3-ME
- Substances contained
- i-buthene, propene, propane
- Storage temperature - min.
- 41 °F
- Description
- Threaded screw-in stud (Stainless Steel, Metric thread) for electrical connections on steel in highly corrosive environments - Recommended maximal cross section of connected cable: 120 mm² / AWG 4.0
- Point type
- Blunt tip
- Base materials
- Steel
- Corrosion protection
- Equivalent corrosion protection as A4(316)
- Description
- Threaded screw-in stud (multilayer coated carbon steel - corrosion protection comparable to HDG) for electrical connections on steel in mildly corrosive environments - Recommended maximal cross section of connected cable: 120 mm² / AWG 4.0
- Point type
- Blunt tip
- Base materials
- Steel
- Corrosion protection
- Duplex coating equivalent to 45 µm hot dipped galvanized
- Description
- Notched T-bolts for tension, perpendicular and parallel shear loads (3D loads)
- Material, corrosion
- Carbon Steel, Hot-Dip Galvanized
- Compatible Anchor Channel
- HAC-50, HAC-60
- Channel profile
- HAC-V 35, HAC-V 40, HAC-V 50, HAC-V 60, HAC-V 70, HAC-V Rebar XTS, HAC-V EDGE
- Description
- Serrated T-bolts for tension, perpendicular and parallel shear loads (3D loads)
- Material, corrosion
- Carbon Steel, Hot-Dip Galvanized, Carbon steel, zinc-plated
- Compatible Anchor Channel
- HAC-30
- Channel profile
- HAC-V-T 50, HAC-V-T 70, HAC-V-T EDGE, HAC-V-T Rebar XTS
- Description
- Rivet nose pieces for fastening steel, aluminum and stainless-steel rivets with your RT 6-22 cordless rivet tool (available sizes include 2.4mm to 4.8mm | 3/32”to 3/16”)
No technical data available
- Description
- Concrete grinder for grinding and finishing of wall surfaces
- Weight according EPTA-Procedure 01/2003 without battery
- 5.6 lb
- Base material
- Concrete, Cement
- No load RPM
- gear 1: 3000 rpm; gear 2: 4100 rpm; gear 3: 5200 rpm; gear 4: 6400 rpm; gear 5: 7400 rpm; gear 6: 8700 rpm
- Description
- Reciprocating saw blade for flexible, fine cutting of 1-3 mm (< 1/8") sheet metal
- Product Class
- Standard
- Shank
- 1/2 in universal shank
- Teeth per inch
- 24
- Description
- #3 pilot point screw for fastening untreated wood or metal-backed drywall boards to metal
- Screw drive/recess type
- PH #2
- Base materials
- Carbon steel
- Environmental Conditions
- Dry indoor
- Description
- Drill stand for heavy duty Hilti coring machines (see technical data for tool compatibility)
- Fixation mode
- Anchor, vacuum with add-on vacuum pad
- Angular coring
- Yes
- Column extension
- Yes
- Description
- Carriages and carriage accessories
- Product information
- Adapter for fitting the DD-HD 30 drill stand to a rail for stitch coring
- Additional Accessory Information
- Adapter for fitting the DD-HD 30 drill stand to a rail
- Description
- Injectable mortar accessories for blowing out (Air nozzle)
No technical data available
- Description
- Fully automatic, highly versatile powder-actuated nailer for single fasteners
- Dimensions (LxWxH)
- 18.7 x 2.7 x 7.5 in
- Weight
- 7.4 lb
- Fastener Intake
- Single
- Description
- Press jaws for PP profile press fittings up to 2". Compatible with NPR 32-A pipe press tools
No technical data available
- Description
- Press jaws for thick-walled profile press fittings up to 1. Compatible with Hilti NPR 32-22/A pipe press tools.
No technical data available
- Description
- Actuators for NPR PR press rings. Compatible with NPR 32-22/A pipe press tools
- Press profile
- n/a
- Service interval
- 1 year
- Description
- Press rings for ProPress® profile press fittings from 2.5" to 4". Compatible with NPR 32-A pipe press tools
No technical data available
- Description
- Press rings for thick-walled profile press fittings up to 4. Compatible with Hilti NPR 32-22/A pipe press tools.
- Press profile
- MP (Megapress, Powerpress)
- Description
- Longer-lasting reciprocating saw blade for cutting 5-15 mm (3/16 - 9/16") thick metal
- Product Class
- Premium
- Shank
- 1/2 in universal shank
- Teeth per inch
- 10
- Description
- Drill stand for heavy duty Hilti coring machines (see technical data for tool compatibility)
- Fixation mode
- Anchor, vacuum with add-on vacuum pad
- Angular coring
- Yes
- Column extension
- Yes
- Description
- Drill stand for heavy duty Hilti coring machines (see technical data for tool compatibility)
- Angular coring
- Yes
- Column extension
- Yes
- For use with
- DD 250-CA, DD 350-CA, DD 500-CA
- Description
- Drill stand for heavy duty Hilti coring machines (see technical data for tool compatibility)
- Angular coring
- Yes
- Column extension
- Yes
- For use with
- DD 250-CA, DD 350-CA, DD 500-CA
- Description
- Baseplates and baseplate accessories
- Fixation mode
- Anchor
- Product information
- Steel base plate for DD-HD 30 drill stands
- Additional Accessory Information
- Alternative anchor base plate made of steel
- Description
- Carriages and carriage accessories
- For use with
- DD 350-CA, DD 500-CA
- Product information
- Increases the drillable diameter range of the DD-HD 30 drill stand by 150 mm. Recommended for core bits larger than 302mm diameter.
- Additional Accessory Information
- Increases the drillable diameter range of the DD-HD 30 drill stand by 150 mm. Recommended for core bits larger than 302mm diameter.
- Description
- Cross columns
- Product information
- Cross-column adapter for the DD-HD 30 drill stand
- Additional Accessory Information
- Cross-column adapter for the DD-HD 30 drill stand
- Description
- Baseplates and baseplate accessories
- Fixation mode
- Vacuum
- Product information
- Vacuum pad for DD-HD 30 drill stand
- Additional Accessory Information
- Vacuum pad for DD-HD 30 drill stand
- Description
- Baseplates and baseplate accessories
- For use with
- DD-HD 30
- Product information
- Set of wheels for DD-HD 30 drill stands
- Additional Accessory Information
- Set of wheels for DD-HD 30 drill stands
- Description
- Common jack screw spindle
- Product information
- Accessory to brace DD-HD 30 drill stands
- Additional Accessory Information
- Accessory to brace DD-HD 30 drill stands
- Description
- General accessories
- For use with
- DD 350-CA, DD 500-CA
- Product information
- Depth gauge for the DD-HD 30 drill stand
- Additional Accessory Information
- Depth gauge for the DD-HD 30 drill stand
- Description
- Accessories for the DS TS20-E wall saw
No technical data available
- Description
- Accessories for the DS TS20-E wall saw
No technical data available
- Description
- Accessories for the DS TS20-E wall saw
No technical data available
- Description
- Baseplates and baseplate accessories
- Fixation mode
- Vacuum
- Product information
- Vacuum pad to drill in pipes with DD-HD 30 drill stands. Can be affixed to pipes with a min. diameter of 300 mm and allows coring holes up to 250 mm diameter.
- Additional Accessory Information
- Vacuum pad to drill in pipes with DD-HD 30 drill stands
- Description
- Column extension for Hilti core drill stands
- Column extension
- n/a
- Additional Accessory Information
- 100 cm long column extension for DD-HD 30 drill stand, includes eccentric pin.
- Product information
- 100 cm long column extension for DD-HD 30 drill stand
- Description
- Allows water collector systems to be fixed to a drill stand – compatible with the WMS 100 water management system
- Product information
- Water collector holder for DD-HD 30 drill stand
- For use with
- DD 200, DD 250, DD 250-CA, DD 350-CA, DD 500-CA
- Additional Accessory Information
- Water collector holder for DD-HD 30 drill stand
Nuron
- Description
- Cordless double cut shears for fast cuts in spiral and ventilation ducts up to 4 x 0.9 mm│20 Gauge - with Hilti SSH CD blades included (Nuron battery platform)
- Material type
- Flat sheet, C.L.U. profile
- Rated voltage
- 21.6 V
- Tool body weight
- 4.9 lb
- Description
- Column extension for Hilti core drill stands
- Column extension
- n/a
- Additional Accessory Information
- 30 cm long column extension for DD-HD 30 drill stand, includes eccentric pin.
- Product information
- 30 cm long column extension for DD-HD 30 drill stand
- Description
- Braced angle bracket for heavy-duty strut channel structures subject to 3D loads, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Braced angle bracket for heavy-duty MT girder structures subject to 3D loads, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring 3D, heavy-duty MT-90 girder structures to concrete, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring 3D, heavy-duty MT-100 girder structures to concrete, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Multi-voltage compact charger for all Hilti Li-ion batteries
- Battery voltage compatibility
- 22 V, 36 V
- Output power
- 90 W
- Output current
- 4 A
- Description
- Multi-voltage, multi-bay charger for Hilti Li-ion batteries (excluding Nuron batteries)
- Battery voltage compatibility
- 22 V, 36 V
- Output power
- 90 W
- Output current
- 4 A
- Description
- Multi-voltage fast charger for all Hilti Li-ion batteries
- Battery voltage compatibility
- 22 V, 36 V
- Output power
- 350 W
- Output current
- 9 A
- Description
- Very robust aluminum asset tag with metal wire shackle for tracking tools and equipment exposed to heavy usage
- Dimensions (LxWxH)
- 1 x 0.4 x 1.4 in
- Barcode type
- 2D barcode (Datamatrix ECC200)
- Operating temperature range
- -4 - 149 °F
- Description
- Extension adapter for M8 threaded studs in highly corrosive environments
- Application
- Grating
- For use with (tools)
- BX 3, DX 351, DX 460, DX 5, DX 6, GX 120, GX 3
- Corrosion protection
- Stainless steel A4(316) or equivalent
- Description
- Soft washer for use with collated nails to attach waterproofing membrane to concrete or masonry
- Application
- Water proofing
- For use with (tools)
- BX 3, DX 351, DX 460, DX 5, DX 6, GX 120, GX 3
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor temporary applications
- Description
- Plastic membrane washer with pre-mounted nail, for attaching waterproofing membrane to concrete or masonry
- Application
- Water proofing
- For use with (tools)
- DX 2, DX 351, DX 460, DX 5, DX 6
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Medium-duty C-Channel profile for use with MT-FL/MT-TL components in outdoor environments
- Material composition
- S280 or better steel
- Surface finish
- Outdoor Coated - ZM
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Medium-duty C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Medium-duty double C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280GD
- Surface finish
- Indoor Coated - Pre-galvanized
- Material thickness
- 2 mm