Heavy-duty channel system (MI)

MI girder

Hot-dip galvanized (HDG) installation girders for constructing adjustable, heavy-duty MEP supports and modular 3D structures

Material composition: DD11 MOD – HN 555-4, S235JR – EN10025-2
Surface finish: Hot-dip galvanized, 75µm - DIN EN ISO 1461

From $550.00

Compare (1)

MIC-C90-DH

Hot-dip galvanized (HDG) bracket to concrete for heavy-duty applications

Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025;Baseplate : ASTM A36
Surface finish: HDG: min 75 µm - ASTM A123

From $245.00

Compare (1)

MIC-C120-DH

Hot-dip galvanized (HDG) bracket to concrete for heavy-duty applications

Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025, Baseplate : ASTM A36
Surface finish: HDG: min 75 µm - ASTM A123

From $365.40

Compare (1)

MIC-S90H

Hot-dip galvanized (HDG) bracket for heavy-duty fastenings to steel

Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025, Baseplate : ASTM A36
Surface finish: HDG: min 75 µm - ASTM A123

From $307.00

Compare (1)

MIC-S120H

Hot-dip galvanized (HDG) bracket for heavy-duty fastenings to steel

Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025, Baseplate : ASTM A36

From $347.55

Compare (1)

MIC-C-AA

Hot-dip galvanized (HDG) baseplate for fastening MI-90 girders to concrete using two anchors

Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

$277.00

Compare (1)

MIC-C-DH

Hot-dip galvanized (HDG) baseplate for fastening MI-90 girders to concrete for heavy-duty applications

Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $521.01

Compare (1)

MIC-C-UH

Connector for fastening MI girders to concrete

Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

$206.00

Compare (1)

MIC-CU-MAH

Hot-dip galvanized (HDG) connector for fastening girders directly to concrete at angles between 0 and 180 degrees

Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

$297.00

Compare (1)

MIB-CDH

Hot-dip galvanized (HDG) baseplate for fastening MI girders to concrete

Material composition: S235JR - DIN EN 10025-2
Surface finish: HDG - EN ISO 1461

$498.01

Compare (1)

MIC-S

Connector (steel)

Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

Error occurred

Please contact us.

Compare (1)

MIC-SH Baseplate (for MI-90)

Hot-dip galvanized (HDG) baseplate for fastening MI-90 girders to steel for heavy-duty applications

Material composition: Connector: S235 - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $408.00

Compare (1)

MIC-SH Baseplate (for MI-120)

Hot-dip galvanized (HDG) baseplate for fastening MI-120 girders to steel for heavy-duty applications

Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $458.00

Compare (1)

MIB-SH

Hot-dip galvanized (HDG) baseplate for fastening MI girders to steel

Material composition: S235JR - DIN EN 10025-2
Surface finish: HDG: min 55 µm - DIN EN ISO 1461

From $308.00

Compare (1)

MI-DGC

Hot-dip galvanized (HDG) double beam clamp for connecting MI girders to steel beams for heavy-duty applications

Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt 48 µm - DIN EN ISO 10684; Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $285.00

Compare (1)

MI-SGC M12

Hot-dip galvanized (HDG) single beam clamp for connecting MIQ steel baseplates to steel beams

Thread connection - M: M12
Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461

$321.00

Compare (1)

MI-SGC M16

Hot-dip galvanized (HDG) single beam clamp for connecting MI steel baseplates to steel beams

Thread connection - M: M16
Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461

$262.00

Compare (1)

MIC-SC

Hot-dip galvanized (HDG) connector used with MI baseplates that allow for free positioning of the girder

Material composition: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2
Surface finish: None (primer coating-basic connector)

$124.00

Compare (1)

MIC-E

Hot-dip galvanized (HDG) connector used to connect MI girders longitudinally for long spans in heavy-duty applications

Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $381.00

Compare (1)

MIC-UH

Standard hot-dip galvanized (HDG) connector for fastening MI girders to one another

Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Backing plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Backing plate, Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $416.00

Compare (1)

MIC-BA /H

Ultimate hot-dip galvanized (HDG) connectors offering highest versatility within the MI modular system

Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Backing plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Tooth Plate: S235 - EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Backing plate, Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $312.00

Compare (1)

MIC-T

Hot-dip galvanized (HDG) connector for fastening MI girders perpendicularly to one another

Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Tooth plate: S235 - EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

$293.00

Compare (1)

MIC-L

Hot-dip galvanized (HDG) connector for fastening MI girders perpendicularly to one another

Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Backing plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Tooth plate: S235 - EN10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Backing plate, Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
Set: Yes

$384.00

Compare (1)

MIC-90-LH

Hot-dip galvanized (HDG) connector offering highest load capacity within the MI and MIQ modular system

Material composition: S235JR - DIN EN 10025-2
Surface finish: HDG: 55 µm - DIN EN ISO 1461
Set: Yes

$448.00

Compare (1)

MIC-U-MA

Hot-dip galvanized (HDG) multi-angle connector used with MIC-MAH connectors for fastening MI girders to one another at an angle

Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Tooth plate: S235 - EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

$293.00

Compare (1)

MIC MAH

Hot-dip galvanized (HDG) multi-angle connector for fastening MI girders to steel beams at an angle

Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $443.00

Compare (1)

MIA-EC

Girder end cap for safer and neater covering of MI and MIQ girder ends

Material composition: Moplen EP 240H
Temperature resistance: -22 - 194 °F

From $78.50

Compare (1)

MIC-MI/MQ-X

Hot-dip galvanized (HDG) connector for fastening MQ strut channels perpendicular to MI girders

Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 40 µm - DIN EN ISO 10684
Tightening torque: 37 ft-lbf

$633.00

Compare (1)

MIA-EH

Hot-dip galvanized (HDG) screw with an integrated toothed plate for easier fastening and one-handed adjustment of MI and MIQ connectors

Material composition: Bolt: Steel grade 8.8; Tooth plate: S235 - EN 10025-2
Surface finish: HDG: 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $120.00

Compare (1)

MIA-EH-P

Hot-dip galvanized (HDG) plate for easier fastening and one-handed adjustment of MI and MIQ connectors

Material composition: Plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Spring: EN 10270-3
Surface finish: HDG: 45 µm - DIN EN ISO 1461

$148.00

Compare (1)

MIA-OH

Hot-dip galvanized (HDG) screw for easier fastening and one-handed adjustment of MI and MIQ connectors

Material composition: Steel grade 8.8
Surface finish: HDG: 45 µm - DIN EN ISO 10684
Tightening torque: 62 ft-lbf

From $70.50

Compare (1)

MIA-TP

Hot-dip galvanized (HDG) tooth plate used with the MIA-OH bolt for fastening of MI and MIQ connectors

Material composition: S235 - EN 10025-2
Surface finish: HDG: 45 µm - DIN EN ISO 1461

$90.75

Compare (1)

M12-F-SL-WS 3/4"

Hot-dip galvanized (HDG) hexagon nut with self-locking mechanism used with all MI connectors

Material composition: Steel grade 8
Surface finish: HDG: 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

$199.00

Compare (1)

MIC-PS/MIC-PSP

Hot-dip galvanized (HDG) connector for fastening pipe shoes to MI girders for heavy-duty applications with expansion

Material composition: U-bolt: Steel grade 8.8; Plate: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Nut: Steel grade 8
Surface finish: HDG: U-bolt, Nut 45 µm - DIN EN ISO 1461; Plate: 55 µm - DIN EN ISO 1461
Tightening torque: 44 ft-lbf

$293.00

Compare (1)

MIC-TRC

Hot-dip galvanized (HDG) connector for fastening M12 (1/2") and M20 (3/4") threaded rods to MI girders

Material composition: Connector, Square washer: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector, Square washer 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 51 ft-lbf

From $92.00

Compare (1)

MP-US OC

Premium

Outdoor coated (OC) pipe straps for universal piping applications

Material composition: DX51D-ZM300 - EN 10346:2015
Surface finish: Zinc-Magnesium coating
Product Class: Premium

From $13.00

Compare (1)

MP-UB OC (imperial)

Standard

Outdoor coated (OC) U-bolts for universal piping applications

Fire resistance ( Yes/No): No
Material composition: Q235B - ASTM A36
Surface finish: Hot-dip galvanized, 45 µm - DIN EN ISO 1461

From $16.00

Compare (1)

MIC-UB

Hot-dip galvanized (HDG) connector for fastening U-bolts to MI girders

Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Washer: DIN EN ISO 7089; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector, Square washer 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Wrench size: 19 mm

From $236.00

Compare (1)