MIQ Girder New
Girder for heavy-duty MEP supports and modular framing
- Height: 3.5 in
- Material composition: S235JR – DIN EN 10025-2
- Surface finish: Hot-dip galvanized, 65µm – DIN EN ISO 1461
From
$388.00
MIQM New
Wing nut
- Material composition: Nut: C4C - DIN EN 10263, Plastic: PA 6.6
- Surface finish: Hot-dip galvanized, 55 µm - DIN EN ISO 1461
From
$163.00
MIQC-C New
Hot-dip galvanized (HDG) baseplate for fastening MIQ girders to concrete for heavy-duty applications
- Material composition: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2
- Surface finish: Hot-dip galvanized 55 µm - DIN EN ISO 1461
- Tightening torque: 62 ft-lbf
From
$104.00
MIQB-S New
Hot-dip galvanized (HDG) baseplate for fastening MIQ girders to steel
- Material composition: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2
- Surface finish: Hot-dip galvanized 55 µm - DIN EN ISO 1461
From
$155.00
MIQC-S New
Hot-dip galvanized (HDG) baseplate for fastening MIQ girders to steel for heavy-duty applications
- Material composition: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2
- Surface finish: Hot-dip galvanized 55 µm - DIN EN ISO 1461
From
$224.00
MIQC-L New
Hot-dip galvanized (HDG) medium-duty connectors to connect two MIQ girders
- Material composition: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2
- Surface finish: Hot-dip galvanized 55 µm - DIN EN ISO 1461
- Tightening torque: 62 ft-lbf
$266.00
MIQC-H New
Hot-dip galvanized (HDG) heavy-duty connectors to connect two MIQ girders
- Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2
- Surface finish: Hot-dip galvanized 55 µm - DIN EN ISO 1461
- Set: Yes
From
$189.00
MIQC-E New
Hot-dip galvanized (HDG) connector used to connect MIQ girders longitudinally for long spans in heavy-duty applications
- Material composition: S235JR - DIN EN 10025-2
- Surface finish: Hot-dip galvanized 55 µm - DIN EN ISO 1461
- Set: Yes
$238.00
Hot-dip galvanized (HDG) double beam clamp for connecting MI girders to steel beams for heavy-duty applications
- Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt 48 µm - DIN EN ISO 10684; Nut 45 µm - DIN EN ISO 1461
- Tightening torque: 62 ft-lbf
From
$266.00
Hot-dip galvanized (HDG) screw with an integrated toothed plate for easier fastening and one-handed adjustment of MI and MIQ connectors
- Material composition: Bolt: Steel grade 8.8; Tooth plate: S235 - EN 10025-2
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
- Tightening torque: 62 ft-lbf
From
$112.00
Hot-dip galvanized (HDG) hexagon nut with self-locking mechanism used with all MI connectors
- Material composition: Steel grade 8
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
- Tightening torque: 62 ft-lbf
$186.00
Hot-dip galvanized (HDG) tooth plate used with the MIA-OH bolt for fastening of MI and MIQ connectors
- Material composition: S235 - EN 10025-2
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
$84.75
Hot-dip galvanized (HDG) plate for easier fastening and one-handed adjustment of MI and MIQ connectors
- Material composition: Plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Spring: EN 10270-3
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
$138.00
Girder end cap for safer and neater covering of MI and MIQ girder ends
- Material composition: Moplen EP 240H
- Temperature resistance: -22 - 194 °F
From
$73.25
