Multi-duty channel system (MT)
More flexible, easier-to-use modular strut and girder system for 3D structures
All prices discounted net
An error occurred
Unfortunately, products matching your chosen category can not be loaded, due to technical issues. Please try again later. Thank you for your understanding.
No products matching your requirements
Unfortunately, there are no products matching your requirements. Please udpate or reset your applied filters.
All prices discounted net
- Material composition: S280 or better steel
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 2.75 mm
Strut channel with corrosion-resistant coating
- Material composition: S280 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 2.75 mm
- Material composition: S280 or better steel
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 2.75 mm
Strut channel with corrosion-resistant coating
- Material composition: S280 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 2.75 mm
Back-to-back double strut channel
- Material composition: S280 or better steel
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 2 mm
Back-to-back double strut channel with corrosion-resistant coating
- Material composition: S280 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 2 mm
Square box section with corrosion-resistant coating
- Material composition: S350 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 2.75 mm
Heavy-duty rectangular box section with corrosion-resistant coating
- Material composition: S350 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 3 mm
Heavy-duty square box section with corrosion-resistant coating
- Material composition: S350 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 3 mm
Extra-heavy-duty rectangular box section with corrosion-resistant coating
- Material composition: S350 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 4 mm
Angle bracket for assembling light-duty strut channel structures
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 6 mm
Angle bracket for assembling light-duty strut channel structures in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 6 mm
Elongated angle bracket for assembling strut channel structures
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 6 mm
Elongated angle bracket for assembling strut channel structures in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 6 mm
Wing fitting for assembling strut channel structures
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 6 mm
Wing fitting for assembling strut channel structures in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 6 mm
Right-angle connector for assembling strut channel structures
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
Right-angle connector for assembling strut channel structures in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
Right-angle, elongated connector for assembling strut channel structures
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
Right-angle, elongated connector for assembling strut channel structures in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
Node for assembling strut channels in a T shape
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
Node for assembling strut channels in a T shape in outdoor environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
Adjustable angle bracket for assembling strut channels in a T shape
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
Adjustable angle bracket for assembling strut channels in a T shape in outdoor environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
Double wing fitting for connecting three strut channels in a 3D structure
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 6 mm
Double wing fitting for connecting three strut channels in a 3D structure in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 6 mm
Triple wing fitting for connecting four strut channels in a 3D structure
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 6 mm
Triple wing fitting for connecting four strut channels in a 3D structure in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 6 mm
Splice connector for coupling MT strut channels end-to-end (MT-40, 50, 60, 40D)
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
Splice connector for coupling MT strut channels end-to-end (MT-40, 50, 60, 40D)
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
Braced angle bracket for heavy-duty strut channel structures subject to 3D loads in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 3 mm
Braced angle bracket for heavy-duty MT girder structures subject to 3D loads in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
Adjustable, braced angle bracket for girder and strut channel structures subject to 3D loading in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 3 mm
Adjustable, braced angle bracket for heavy-duty MT girder structures subject to 3D loading in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
Flange for constructing T-beams using MT girders
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
Gusset plate for L-shaped connections with MT-70 and MT-80 girders
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
Gusset plate for T-shaped connections with MT-70 and MT-80 girders
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
Gusset plate for T-shaped connections with MT-80 or MT-100 girders
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
Splice connector for coupling MT-90 or MT-100 girders end-to-end
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 6 mm
Splice connector for coupling MT-70 or MT-80 girders end-to-end
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 5 mm
Base connector for anchoring light-duty strut channel structures to concrete or steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
Post base connector for anchoring light-duty strut channel structures to concrete or steel in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
Base connector for anchoring light-duty strut channel structures to concrete or steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
Base connector for anchoring light-duty strut channel structures to concrete or steel in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
Base connector for anchoring strut channel structures to concrete or steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
Base connector for anchoring strut channel structures to concrete and steel in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
Base connector for anchoring strut channel structures under 3D loading to concrete or steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 8 mm
Base connector for anchoring strut channel structures under 3D loading to concrete and steel in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 8 mm
Base connector for anchoring strut channel structures under 3D loading to concrete and steel or steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 8 mm
Base connector for anchoring strut channel structures under 3D loading to concrete and steel in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 8 mm
Base connector for anchoring MT-70 and MT-80 girder structures to concrete and steel in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 8 mm
Base connector for anchoring MT-70 and MT-80 girder structures to concrete in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 12 mm
Base connector for anchoring 3D, heavy-duty MT-90 girder structures to concrete in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 12 mm
Base connector for anchoring 3D, heavy-duty MT-100 girder structures to concrete in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 12 mm
Base connector for fixation of MT-90 and MT-100 girder structures to steel in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 15 mm
Base connector for fixation of MT-90 and MT-100 girder structures to steel in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 15 mm
Base connector for fixation of MT-90 and MT-100 girder structures to steel in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 15 mm
Welded starter bracket for fastening MT girders to steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 6 mm
Heavy-duty sandwich plate for fastening girder structures to steel beams
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 15 mm
Beam clamp for fastening MT-70 and MT-80 girders to steel beams
- Surface finish: Hot-dip galvanized - for outdoor use
Beam clamp for fastening MT-90 and MT-100 girders to steel beams
- Surface finish: Hot-dip galvanized - for outdoor use
Adjustable brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
Adjustable brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete in outdoor environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
45-degree angle brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
45-degree angle brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
45-degree angle bracket for bracing MT-40 and MT-50 strut channel structures
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
45-degree angle bracket for bracing MT-40 and MT-50 strut channel structures in moderately corrosive environments
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
Adjustable brace fitting for assembling MT girder structures
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
Hexagon bolt for use with Twist-Locks when assembling strut channel structures
- Surface finish: Pre-galvanized - for dry indoor use only
Hexagon bolt for use with Twist-Locks when assembling strut channel structures in moderately corrosive environments
- Surface finish: Hot-dip galvanized plus - for outdoor use
Thread-forming bolt for use when assembling MT girder structures
- Surface finish: Hot-dip galvanized plus - for outdoor use
Adjustable guiding bracket for fastening sliding pipe shoes to MT-70 and 80 girders
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 6 mm
Adjustable guiding bracket for fastening sliding pipe shoes to MT-90 and 100 girders
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 6 mm
Low-friction interface for use between pipe shoes and MT-70 and 80 girders
No technical data available
Low-friction interface for use between pipe shoes and MT-90 and 100 girders
No technical data available
Low-friction interface for use between pipe shoes and the MT-U-Gl T-Beam
No technical data available
Channel end cap for MT-20 strut channels
No technical data available
Channel end cap for MT-30 strut channels
No technical data available
Channel end cap for MT-40 and MT-50 strut channels
No technical data available
Channel end cap for MT-60 strut channels
No technical data available
Channel end cap for MT-70 girders
No technical data available
Channel end cap for MT-80 girders
No technical data available
Channel end cap for MT-90 girders
No technical data available
Channel end cap for MT-100 girders
No technical data available
Nut for attaching media to MT strut channels
- Material composition: High Strength Steel
- Surface finish: Pre-galvanized - for dry indoor use only
Nut for attaching media to MT strut channels in moderately corrosive environments
- Material composition: High Strength Steel
- Surface finish: Hot-dip galvanized plus - for outdoor use
Slotted angle plate for attaching media to MT girders in moderately corrosive environments
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
Nut for attaching media to MT strut channels
- Material composition: High Strength Steel
- Surface finish: Pre-galvanized - for dry indoor use only
Nut for attaching media to MT strut channels in moderately corrosive environments
- Material composition: High Strength Steel
- Surface finish: Hot-dip galvanized plus - for outdoor use
Summary:
More flexible, easier-to-use modular strut and girder system for 3D structures