Medium-duty channel system (MQ)
Medium-duty channel systems for a wide range of 3D applications
All prices discounted net
An error occurred
Unfortunately, products matching your chosen category can not be loaded, due to technical issues. Please try again later. Thank you for your understanding.
No products matching your requirements
Unfortunately, there are no products matching your requirements. Please udpate or reset your applied filters.
All prices discounted net
Ultimate galvanized adjustable channel plate for trapeze applications
- Wrench size: 1/2 in
- Material composition: DD11 MOD - HN 547, DC04 - DIN EN 10130
- Surface finish: Electro galvanized - for dry indoor use only
Galvanized pipe clamp saddle for connecting threaded components to strut channels
- Product Class: Premium
- Thread connection - M: 3/8 in
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025
Galvanized wing nut for connecting modular support system components
- Tightening torque: N/A ft-lbf
- Surface finish: Electro galvanized - for dry indoor use only
Galvanized bracket with a 21 mm, high single MQ strut channel for medium-duty indoor applications
- Material thickness: 2 mm
- Material composition: S250GD - DIN EN 10346
- Surface finish: Sendzimir galvanized – for dry indoor use only
Galvanized double bracket for medium-duty indoor applications
- Material thickness: Channel: 2 mm, baseplate: 8 mm
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
Galvanized bracket with a 41 mm high, 3 mm thick single MQ strut channel
- Material thickness: Channel: 3 mm, baseplate: 8 mm
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
Galvanized bracket with a 72 mm high, single MQ strut channel for medium-duty applications
- Material thickness: Channel: 2.75 mm, baseplate: 10 mm
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
Galvanized angle brace for brackets
- Material thickness: 3 mm
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
Galvanized pipe clamp saddle for connecting threaded components (imperial) to MQ strut channels
- Product Class: Premium
- Material composition: Nut: C4C - EN 10263-2, Plate: S235JR - EN 10025-2, Plastic: PBT
- Surface finish: Electro galvanized - for dry indoor use only
Galvanized wing nut for connecting modular support system components
- Thread connection - M: 1/4 in
- Material composition: Wings: Plastic PA, Nut: C4C - DIN EN 10263
- Surface finish: Electro galvanized - for dry indoor use only
Galvanized bored plate for fire-tested trapeze assembly and anchoring
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
Galvanized 90-degree pre-assembled angle for connecting multiple MQ strut channels
- Wrench size: 17 mm
- Tightening torque: 30 ft-lbf
- Material composition: Angle: DD11 - DIN EN 10111, Bolt: M10 grade 8.8 - DIN ISO 898
Galvanized 90-degree angle for connecting multiple MQ strut channels
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Number of holes: 8
Galvanized 90-degree heavy angle for connecting multiple MQ strut channels in medium/heavy-duty applications
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 4 mm
Galvanized flat T channel connector for fastening two MQ channels together
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 4 mm
Galvanized channel foot for fastening channels to concrete
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 4 mm
Galvanized flexible channel connector for two-dimensional structures
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 4 mm
Galvanized channel connector for three-dimensional structures
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 4 mm
Galvanized channel foot for fastening channels to concrete in light/medium-duty applications
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 4 mm
Galvanized channel foot for fastening channels to concrete at an angle
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 4 mm
Galvanized clamp for cross-connection of one MQ strut channel to another
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 4 mm
Clamp (channel to concrete)
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 4 mm
Galvanized pivoting element for fastening channels to most common base materials
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 4 mm
Galvanized elements for assembling 3D structures on site
- Wrench size: 17 mm
- Tightening torque: 30 ft-lbf
- Surface finish: Electro galvanized - for dry indoor use only
Galvanized channel tie to create double channels
- Tightening torque: 15 ft-lbf
- Thread connection - M: M10
- Material composition: S235JR - DIN EN 10025
Galvanized channel foot for fastening MQ channels to concrete
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: Channel connector: 4 mm, baseplate: 8 mm
Galvanized flexible channel connector used as a longitudinal extender for MQ strut channels
- Material composition: S235JRG2 - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 4 mm
Galvanized flat channel connector used as a longitudinal extender for MQ channels
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 4 mm
Galvanized flat T channel connector for fastening two MQ strut channels together
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 4 mm
Galvanized 45- or 135-degree angle for connecting multiple MQ strut channels
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 4 mm
Galvanized 90-degree angle for connecting multiple MQ strut channels
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Number of holes: 3
Galvanized channel foot for fastening MQ channels to concrete
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: Channel connector: 4 mm, baseplate: 6 mm
Galvanized flexible channel connector for two-dimensional structures
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 4 mm
Summary:
Medium-duty channel systems for a wide range of 3D applications