Skip to main content
OrdersCart
ProductsSolutionsEngineering CenterSupport and DownloadsCompany
Cart
Save $60 on insertsUse code SYSTEM26Shop now
new

MP-PS 2-2 Pipe shoe

Low double pipe shoe for 136mm-144mm outer diameter #2330986

MP-PS L2-2 Double Pipe Shoe Low Version
MP-PS L2-2 Double Pipe Shoe Low Version Fixpoint
MP-PS M2-2 rotated clamp, double pipe shoe, medium version
MP-PS H2-2 rotated clamp, double pipe shoe, high version
Single pipe run mounted with MP-PS pipe shoe on MT Girder
Installed MT-System pipe rack MP-PS Pipe Shoes
MP-PS L2-2 Double Pipe Shoe Low Version vertical pipe clamps
MP-PS Single or double pipe shoe rotated pipe clamps front view

Outdoor coated (OC) pipe shoe with height and slope adjustability for heavy industrial applications with outer pipe diameters of 21-328 mm (1/2" to 12")

  • Clamping Range - D: 5.35 - 5.67 in
  • Nominal pipe size (imperial): 5 in
  • Nominal pipe size: 125 mm

Choose options

Clamping Range - D
  • 0.83 - 1.02 in
  • 1.02 - 1.22 in
  • 1.26 - 1.46 in
  • 1.5 - 1.73 in
  • 1.77 - 2.01 in
  • 2.05 - 2.28 in
  • 2.32 - 2.56 in
  • 2.68 - 2.91 in
  • 2.95 - 3.19 in
  • 3.46 - 3.7 in
  • 3.94 - 4.25 in
  • 4.33 - 4.65 in
  • 4.92 - 5.24 in
  • 5.35 - 5.67 in
  • 5.98 - 6.38 in
  • 6.42 - 6.81 in
  • 7.56 - 7.95 in
  • 8.54 - 8.94 in
  • 9.61 - 10 in
  • 10.51 - 10.91 in
  • 12.52 - 12.91 in
Height above ground to base of pipe
  • 3-1/2 - 4-9/16 in
  • 4-9/16 - 6-11/16 in
  • 6-11/16 - 8-3/4 in
Nominal pipe size (imperial)
  • 1/2 in
  • 3/4 in
  • 1 in
  • 1-1/4 in
  • 1-1/2 in
  • 2 in
  • 2-1/2 in
  • 3 in
  • 3-1/2 in
  • 4 in
  • 5 in
  • 6 in
  • 7 in
  • 8 in
  • 10 in
  • 12 in
Nominal pipe size
  • 15 mm
  • 20 mm
  • 25 mm
  • 32 mm
  • 40 mm
  • 50 mm
  • 65 mm
  • 80 mm
  • 100 mm
  • 125 mm
  • 150 mm
  • 200 mm
  • 250 mm
  • 300 mm
Pack size
  • 2 pc
  • 4 pc
 Product options
Quantity
Box
Total Pieces
2
You cannot see your company prices

Please Log in or register to see your company prices. Prices vary for Hawaii, Alaska and US Territories.

Discounted net
$353.01
$353.01
/
1 Box

Technical Data

Clamping Range - D
5.35 - 5.67 in
Nominal pipe size (imperial)
5 in
Nominal pipe size
125 mm
Fire resistance ( Yes/No)
No
Temperature resistance
-4 - 572 °F
Material composition
Base-plate: S280GD / Modif POSMAC-C, Bows: S235JR - DIN EN 10025, Middle-plate: S235JR - DIN EN 10025, Sliding-plate: PA66 + GF30, Bolt: Steel grade 8.8, Nut: Steel grade 8
Material thickness
base-plate: 4mm, Middle-plate: 7mm, Sliding-plate: 3mm, Serrated washer: 4mm
Surface finish
Outdoor Coated - HDG
Hot-dip galvanized
Yes
Stainless steel
No
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Base material type
Concrete, Steel, Modular Support
Clamping screw
M12x60
Tightening torque
37 ft-lbf
Wrench size
19 mm
Tightening torque for height adjustment
36.88 ft-lbf
Cross section width - b
1.57 in
Cross Section Thickness - s
0.2 in
Cross section width and thickness (b x s)
1.57 x 0.2 in
Height - H
9.9 in
Height above ground to base of pipe
3-1/2 - 4-9/16 in
Height above ground to base of pipe min.
3-1/2 in
Height above ground to base of pipe min. (conversion inch fractional)
3-1/2 in
Height above ground to base of pipe max.
4-9/16 in
Height above ground to base of pipe max. (conversion inch fractional)
4-9/16 in
Height above ground to center of pipe
6.318897637795276 - 7.38 in
Height above ground to center of pipe min.
6.318897637795276 in
Height above ground to center of pipe min. (conversion inch fractional)
6-5/16 in
Height above ground to center of pipe max.
7.38 in
Height above ground to center of pipe max. (conversion inch fractional)
7-3/8 in
Width - B
10.04 in
Length
10.1 in
Weight
9.9 lb
Additional product information
Friction coefficient - Sliding plate (PA66-GF30) on Zinc-Magnesium surface: 0.146, Friction coefficient - Sliding plate (PA66-GF30) on Hot Dip Galvanized surface: 0.129, PA66-GF30 vs Zn: 0.177

Documents

pdf Corrosion handbook, English [ 9.4 MB ]

Features & Applications

Features

  • One-for-all versatility – use the same pipe shoe system for fix-, slide-, guided- or freestanding supports to Hilti modular girders, steel beams and concrete
  • Extensive software support – simplify calculation by using PROFIS, Hilti FixPoint Calculator, BIM/CAD libraries and various plug-ins
  • Load data and documentation available – design according to EN13480-3, Eurocode 3 and MSS-SP58 guidelines for pipe support components
  • Quicker installation on-site – easily adjust the height and slope after fastening the pipe shoe in place
  • Wider clamping range – suitable for various different pipes with or without additional inlays

Applications

  • Fastening pipes to steel beams, concrete or Hilti modular support girders
  • Pipe installations in onshore industrial, power generation, pharmaceutical, electronics or automotive manufacturing facilities
  • Suitable for application temperatures of up to 300 °C and an insulation thickness of up to 220 mm
  • Recommended for use in Indoor or Outdoor with low to moderate pollution (C3)
Request live Product Demo

Request live Product Demo

Would you like an interactive demonstration of this product? Meet one of our product experts for a free and hands-on demonstration.

Request live Product Demo
Start live chat

Start live chat

Use this instant messaging tool to get easy and quick access to our Customer Service team. This service is available during business hours 8:00AM to 5:00 PM CST.

Start live chat
Back
Request demo
Live chat
Call me back