Skip to main content

Experience the latest cordless innovation. Discover Nuron


Features & Applications

  • Suitable even for challenging jobsite conditions – HY 200-R V3 works in hammer drilled, hollow drilled and diamond cored holes (with TE-YRT roughening tool), at base material temperatures from 14 to 104°F. Longer working time optimized for post installed rebar
  • Design loads are now the same for dry and saturated concrete – design your structural connections more efficiently using Hilti PROFIS Engineering software
  • Practical and versatile adhesive anchor – approved for water-filled holes. No hole cleaning required when using HIT-Z anchor rods or drilling with hollow drill bit and a compatible vacuum cleaner
  • Faster, easier installation using the now fully cordless SafeSet system – save time on-site, work virtually anywhere and remove opportunities for installation errors
  • Extensive approvals available – including ESR for concrete, seismic category A-F and grout-filled masonry and ETAs for seismic C2 and service life up to 100 years
  • Structural concrete connections with post-installed rebar
  • Fastening secondary steel structures (e.g. racking, machinery, guard rails, sound barriers) to concrete
  • Anchoring structural steel connections (e.g. steel columns, beams) to concrete
  • Strengthening concrete and retrofitting reinforced concrete buildings, including replacing misplaced/missing cast-in rebar with post-installed rebar
  • Concrete connections designed both as rigid and as simply supported

Technical Data

Documents & Videos

Consulting & Support

Ratings & Reviews

HIT-HY 200-R V3 rebar installation image

Buy yourself some time with HIT-HY 200-R V3

Take quality and efficiency to new heights

Properly and efficiently installing an anchor is stressful enough when you don’t have a second to spare, but factor in adverse jobsite conditions and it only gets worse. Luckily, we’ve developed chemical anchors that help get the job done despite the hurdles a jobsite might have.

Ultimate, fast-cure adhesive HY 200-R V3 boosts the productivity of installing anchors in both wet and dry conditions. Offering ICC-ES approval for concrete, masonry and seismic loading, its working time is optimized for rebar and deep anchoring applications.

Always the right fit

With HY 200 R-V3 and its sibling HY 200-A V3, engineers can submit designs with one set of load values without having to resubmit if needs change. Both versions are interchangeable depending on the location and climate of the jobsite. The contractor can then pick whether they need HY 200-R V3 for warm climates or HY 200-A V3 for accelerated cure times in colder climates.

The SafeSet System

Construction worker using Hilti SafeSet installation method with VC 140-2-22 "vac-pack" vacuum and TE 60-22 cordless rotary hammer.

Hilti SafeSet is a proven system that helps to ensure faster, easier and safer Hilti anchor installation, every time.

With either automatic cleaning of the hole using Hilti’s Hollow Drill Bit system with the new VC 140 "vac-pack" or the zero-cleaning-required HIT-Z rod, SafeSet can save installers up to 60% on installation time while helping to limit dust caused by drilling and manual cleaning.

Construction worker using Hilti SafeSet installation method with HDE 500-22 cordless adhesive dispenser and red HIT-CR 500 cartridge holder for HIT-HY 200 adhesives. VC 140-2-22 "vac-pack" vacuum, TE 60-22 cordless rotary hammer

SafeSet is also designed to work in damp concrete, making the toughest of jobsite conditions work for you.

With the ultimate performance of HY 200 V3 combined with the SafeSet system, you can take productivity to new heights and enjoy peace of mind at the same time. As the first fully cordless system on a single battery platform, it’s the fastest, safest and easiest way to install an anchor. When you’re ready, discover the difference for yourself.

Log in to proceed
Register now
Added to cart
Added to cart
Go to shopping cart