Engineering Center

We are building a Pergola / Trellis 10' X 80' with 10 columns on existing pool deck. The deck is been reinforcing under the location of each column by other company. Our Engineer made the calculations for Wedge anchors, but the Engineer of the Master Project wants to change them for an Epoxy anchors, because the waterproofin...

Is the CFP-SP AWHB a hard coat? How resistant to damage is it? Does it chip or can be picked at? If the paint finish is damaged does that compromise the intumescent coating? Is there any special training needed to repair paint coating if it is damaged? Can the CFP-SP WB 120 be used at exterior applications?

What is the difference between the Hilty HAS-V-36 anchor and a standard off the shelf F1554, grade 36 threaded rod? Can a standard threaded rod be used in substitution for HAS-V-36 with HIT-HY 200 Epoxy?

If a TZ expansion anchor is installed and torqued to the tabulated value from Table 1 or Table 14, does that mean the anchor is installed properly or would pull testing still need to be required?

Profis is saying all of our liscense seats are in use, but no on the the office has it open. Does it take time for the liscense to reset once someone logs off?

For a 4 bolt base plate connection, does Hilti Profis check the concrete shear by taking all the shear force in the 2 bolts closest to the edge of the concrete?

Wood panelized roof is insulated and has 4" or 6" purlins. Need assembly detail for a wood panelized roof condition.

We are using a 1-1/4" diameter rod that will be epoxied with the RE 500 system in concrete. What is the maximum diameter of the hole in the concrete? Contractor drilled a 1-5/8" hole in the concrete. Is this adequate?

Coverage Rate of Fire Finish

Hi I am interested at what price I can buy the machine SF6H-22