Engineering Center

What is the projection of a HDA-PR M16x190/40? I know the 40mm refers to the maximum fastenable thickness. I need to cover the nut and end of anchor above the baseplate for cleanability and need to know how far it will extend past the baseplate.

What is the cure time for CP 572 (example 1/8)

Is my customer able to remove the 1 Gyp. Liner to cover installation gap and the sheet of Drywall above the corridor ceiling? They would then fire safe inside the stud cavity from the ceiling to the deck. Is this something they can do to keep the rating?

We are reviewing an existing building where a cinder concrete slab has sprinkler lines that we are looking to verify the anchor capacity.

Can you please provide, Hilti CP 617 Firestop Putty Pad Environmental Product Declaration (EPD)?

ESR-3814 discusses torque and notes Tmax but does not define the Tmax value. Can you clarify? I also reviewed FTG 22Ed but did not find any info.

Looking for a dynamic head of wall detail for a 1-hour rated cmu partition to the underside of un-rated metal roof deck

In order to support our invoicing on projects I need to turn PROFIS on and off on a monthly basis. The last time I tried, using a company P.O. it was a real difficult, but I finally got it started. When I was through I notified you of our termination date (as requested in the acknowledged sales contract terms and conditions) w...

The HDG option for the HAS-V rods with HILTI HY 270 is not available in the PROFIS design software. Upon checking the technical data of the HAS-V rods, it contains a table of allowable capacities paired with adhesives, where HILTI HY-270 is included (see snapshot attached). On the other hand, HILTI Product Technical Guides sho...

We are reviewing the Hilti KH-EZ anchor data for an application in precast 'sandwich' panels (1 1/2 outer shell) and have identified what appears to be a conflict between the published hollow-core document and the requirements contained in ESR-3027. Please advise if the hmin values from the ESR can be ignored for this applicat...