Engineering Center

Do you have an insert anchor that can take 17K Tension and 2 Kips shear using a safety factor of 4. it will support a cantilever tower on a concrete pad

I am looking for a UL listing for a 4" max pipe penetration in a U 415 shaft wall.

Do you have a detail for fire stop around a structural I-Beam that is penetrating a rated assembly?

I need the installation key

I am building a cabin on a solid rock bluff and want to epoxy all thread into the rock to anchor the structure. Does Hilti have a product that has been proven to work in rock?

We have a field condition between a 1 hour rated wall and a spray-applied fireproofed steel beam. There is not enough room to get a tool up into the space between the beam and the adjacent wall. We have terminated the wall at the same level as the bottom flange of the beam and then fire-sealed. Which HILTI material would be ...

Can you provide a UL number for the attached Pipe penetration detail using firestopping. 2 Hour Firerating using intrumescent Fire Stopping

Hello Hilti FPE team. Is there a firestop system for Aquatherm piping through a gypsum board shaft wall? 50Pa is required. However, if there's even a system with 2.5Pa I'd like to know. Access to the pipe is only from one side of the wall but if need be I could access both sides of the shaft wall. If systems are not availab...

HIT HY-200 suitable use for install rebar under slab?

Is it possible to have access or purchase the 4-Part Advanced Anchor Series (https://ask.hilti.com/article/live-4-part-advanced-anchor-series-fall-2019/kryonu) that was offered in the fall of 2019?