Engineering Center

My 1 Hilti PDH certificate is not showing up for the 23OCT2025 Hilti Webinar regarding HIT-HY 200 V3 A fast cure adhesive designed for real life jobsites. Please advise how I retrieve this certificate of completion / attendance. The webinar page says that 1 Hilti PDH will be provided. Link: HIT-HY 200 V3: A fast cure adhes...

I'm trying to register for an upcoming webinar on 11-11-25 and I'm getting an message, No results found. How can I register?

Good morning, I am trying to register for the Roof Deck Connections and the Factors that Affect Performance webinar and there is nothing showing to register for, even though it was advertised in an email.

Many of the design values for anchors into precast hollow core panels specify a minimum compressive strength of 7,000psi as shown in the footnotes of the tables. Is there an adjustment factor or formula that can be used to obtain design values for anchors into panels with a lower concrete strength?

Can someone guide me on how to apply Supplementary Reinforcement in profis? I am not sure where to input the data.

Hi Why does Hilti Profis not use 1.0 for bond splitting factor for post-installed rebars (adhesive anchor) in tension when there is supplemental reinforcement in uncracked concrete ? The equations 17.6.5.5.1a & 17.6.5.5.1b in ACI 318-19 are only for uncracked concrete without supplementary reinforcement. This often causes the ...

Please see attached detail. What are your thoughts on this?

Please see attached detail. What are your thoughts on this?

When I am trying to design an anchor in Hilti for ACI 318-19 Case 3 the program checks the breakout of concrete for the full force, but it checks the anchor steel shear strength for half of force only like shown in Case 1. Why is Hilti not loading the front anchors with all the load for the steel strength per section 17.7.1.1 ...

Not able to download my webinar attanding certificate PROFIS Engineering Diaphragm Design Software Demo (PROFIS-D).of 10/28/25