Engineering Center

Can't seem to find one in the selection software.

For Insulated Pipes. The Fixed Point shall be installed directly on the pipe itself before applying the Insulation. As sometimes the insulation has large thicknesses. I believe this will lead to failure in the fixed point mechanism, as there is no fixed grip on the pipe itself. Kindly advice my understanding is cor...

When using Hilti Profis Engineering, there is an option to set the hole condition at either Hammer Drilled or Core Drilled. What is the impact of this toggle? I don't see a difference in the demand to capacity ratios when changing this toggle.

I have a new email address. Can you please help me update? I don't see a way to change my email address in my profile.

We are using a metal roofing system (Butler MR-24 roofing system) on our project. The 1-hr rated wall of the fire pump room terminates at the bottom of the metal panel roof similar to your System No. CJ-D-0010 as we are using a pre-engineered metal building w/ Z purlins etc. We also have another condition within the same room ...

We have a condition where we have up to 40 1/2" MC cables that need to penetrate a 2-hr wall. Typically they are grouped together into "bundles" of 5. What firestop system would work for this? There are also 4 pipes that are penetrating the wall in the same area, and so I don't know if it would be better to have one large fire...

base plate for a column with Channel- how to model

PROFIS engineering suite will not allow me to change the embedment (120mm) for cast in place hex head anchors. Is there any way to go more than 120mm embedment?

WHERE IS ACI 318-14 - 17.5.1.3 IMPLEMENTED IN THE PROFIS CALCULATIONS FOR BUILT UP GROUT PADS?

I'm working with an existing building that has a composite deck with 2 1/2" of concrete above the upper flute of a 3" steel deck. I would like to use KH-EZ screw anchors to anchor some equipment to the top of the concrete, so I am referring to ESR-3027. The applicable table would be Table 9. However, the table has a note that ...