Search Results
648
Products for "HIT-HY 200 V3"
Filter
- Description
- Standard hand setting tools for short embedment drop-in anchors (HDI-P/HDI-P TZ)
No technical data available
Nuron
- Description
- Compact and light 22V Li-ion battery for light-duty tasks using Nuron power tools
- Weight
- 1.21 lb
- Dimensions (LxWxH)
- 5.2 x 3.2 x 1.9 in
- Working temperature range
- 1 - 140 °F
- Description
- Self-drilling screw (A2 stainless steel) with 5/16" washer for thin-medium metal-to-metal fastenings (up to 0.16 inch)
- Screw drive/recess type
- Hexagon 8
- Base materials
- Aluminium, Carbon steel
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor, rural or urban environment with low pollution, Outdoor with moderate concentration of pollution
- Description
- Self-drilling hex head screw (zinc-plated) for fastening sheet metal to steel substructures
- Screw head type
- Hexagon head
- Screw drive/recess type
- 5/16 Hexagon
- Collated
- No
- Description
- Self-drilling screw (A2 stainless steel) with 5/16" washer for fastening steel and aluminum to wood (up to 0.08 inch)
- Screw drive/recess type
- Hexagon 8
- Base materials
- Wood
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor, rural or urban environment with low pollution, Outdoor with moderate concentration of pollution
- Description
- Charging adapter for 12V batteries on C4/36 chargers
- Charger compatibility
- C 4/36-90, C 4/36-350, C4/36-DC, C 4/36-MC4, C 4/36, RC 4/36, RC 4/36-DAB
- Dimensions (LxWxH)
- 5.3 x 3.7 x 2.1 in
- Weight
- 0.4 lb
- Description
- Self-drilling screw (A2 stainless steel) without washer for DBV (drained & back-ventilated) rainscreen façade installation (up to 0.16 inch)
- Screw drive/recess type
- Hexagon 8
- Base materials
- Aluminium
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor, rural or urban environment with low pollution, Outdoor with moderate concentration of pollution
- Description
- Accessories for the DST 20-CA wall saw
No technical data available
- Description
- Multi-line laser with 3 green lines for plumbing, leveling, aligning and squaring
- Accuracy
- ±0.08 in at 33 ft
- Max. operating distance (diameter)
- 131 ft (lines), 328 ft (lines, with receiver)
- Self leveling range at room temperature
- -3.0/ +3.0° °
- Description
- Adhesive tape, metal holders, wires, cable binders, or accessory kits for ON!Track equipment management
- Operating temperature range
- -4 - 113 °F
- Description
- Helps reduce the spread of flames and smoke in residential type V-B and commercial non-rated construction
- Foam Yield (up to)
- 1.6 ft³
- Approx. tack free time (at 74°F / 50% rel. humidity)
- 12 min
- Approx. cut time (at 23°C / 50% rel. Humidity)
- 25 min
- Description
- Baseplates and fastener guides for the DX 36 powder actuated fastening tool
- Fastener Intake
- Single nail
- For use with (tools)
- DX 36
- Description
- Stud holders (M6-1/4" - M12-1/2"), designed to be paired with studs for Hilti's cordless stud fusion system
No technical data available
Nuron
- Description
- Lighter and more powerful cordless metal screwdriver for heavy duty fastening
- Tool type
- Screwdriver
- RPM
- 2000 rpm
- Max. torque
- 110.6 in-lbf
- Description
- Baseplates and fastener guides for the DX 35 semi-automatic powder actuated fastening tool
- Fastener Intake
- Single nail
- For use with (tools)
- DX 35
- Description
- Stepped drill bits for predrilling accurate holes or removing coatings for S-BT threaded screw-in studs on steel
- Base materials
- Metal
- Minimum thickness of base material (steel)
- 6 mm
- Length
- 95 mm
- Description
- Standard hand setting tools for short embedment drop-in anchors (HDI-P/HDI-P TZ)
No technical data available
- Description
- Targets used for stationing a Construction Total Station or other advanced layout tools
- For use with (local pick)
- POS 15, POS 18, POS 150, POS 180, PLT 300
- Product information
- Prism target with mount
- Description
- Replacement filters for use with Hilti air cleaners
- Filter type
- Dry
- Filter efficiency
- 99.9% filter efficiency
- Description
- Grinding hood for grinding chamfers into concrete edges with DGH 130
No technical data available
- Description
- Powerful and extremely light TE-S breaker for concrete and demolition work
- Working direction
- Floor
- Tool chuck type
- TE-S
- Weight according EPTA-Procedure 01/2003 without battery
- 32 lb
- Description
- Circular saw for heavy-duty straight cuts up to 2-3/8" depth with a 7.25" blade
- Max. cutting depth
- 2.64 in
- Blade diameter - range
- 7-1/4 - 7-15/32 in
- Cutting depth at 45 degrees
- 1-13/16 in
- Description
- Cordless pistol-grip cutter for copper and aluminum cables up to 3.2” │ 80 mm (Nuron battery platform)
- Cutting capacity
- 3,3" Al cable, 3,3" Cu cable, Al Class 1: Max. outer diameter 85 mm, Al Class 2: Max. outer diameter 85 mm, Al Class 5: Max. outer diameter 85 mm, Cu Class 1: Max. outer diameter 85 mm, Cu Class 2: Max. outer diameter 85 mm, Cu Class 5: Max. outer diameter 85 mm
- Head rotation
- 350 °
- Dimensions (LxWxH)
- 16.6 x 4.1 x 20.7 in
Nuron
- Description
- Ultimate 22V Li-ion battery built to boost the performance and run time of heavy-duty Nuron power tools
- Weight
- 2.88 lb
- Dimensions (LxWxH)
- 6.1 x 3.4 x 3 in
- Working temperature range
- 1 - 140 °F
Nuron
- Description
- Powerful and light battery-powered jackhammer for breaking up concrete and other demolition work (Nuron battery platform)
- Working direction
- Floor
- Tool chuck type
- TE-S
- Tool body weight
- 38.4 lb
- Description
- Semi-adjustable and braced angle bracket, for heavy-duty MT box profiles with 3D loading in moderately corrosive environments
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Plastic dust disposal bags for dry applications, recommended for mineral dust
- For use with
- VC 140-2-22, VC 4LX-22 T15
- Bag type
- Wet and Dry
- Bag material
- Plastic
- Description
- Fleece dust disposal and pre-filter bags for dry applications, recommended for wood
- For use with
- Tank VC 3/4-T15, VC 140-2-22
- Bag type
- Dry
- Bag material
- Fleece
New
- Description
- Subcompact-class cordless impact wrench with 3/8” friction ring anvil for economical anchoring and bolting, especially in cramped spaces
- Anvil type
- 3/8" friction ring
- Maximum torque
- 133 ft-lbs (1)
- Full hammering frequency
- 3.988 impacts/minute
- Description
- Press jaws for RLS® press fittings up to 1-3/8". Compatible with Hilti NPR 24-22 pipe press tools
- Press profile
- RLS
- Service interval
- 15.000 cycles or 1 year
Nuron
- Description
- Powerful cordless SDS Plus (TE-C) rotary hammer with Active Vibration Reduction and Active Torque Control for concrete drilling and chiseling (Nuron battery platform)
- Weight according EPTA-Procedure 01/2003 without battery
- 8.6 lb
- Optimum Hammer drilling range
- 13/32 - 31/32 in
- Single impact energy
- 2.8 ft-lbs
- Description
- Powerful SDS Plus (TE-C) rotary hammer for heavy-duty concrete drilling and corrective chiseling, with Active Vibration Reduction (AVR)
- Weight according EPTA-Procedure 01/2003 without battery
- 9.3 lb
- Optimum Hammer drilling range
- 13/32 - 25/32 in
- Single impact energy
- 2.7 ft-lbs
- Description
- Powerful SDS Plus (TE-C) rotary hammer for heavy-duty concrete drilling
- Weight according EPTA-Procedure 01/2003 without battery
- 9 lb
- Optimum Hammer drilling range
- 13/32 - 25/32 in
- Single impact energy
- 2.7 ft-lbs
- Description
- Corded two-speed, high-rpm drill driver for metal applications
- Chuck clamping range
- 1/16 - 1/2 in
- No load RPM
- gear 1: 1200 rpm; gear 2: 3300 rpm
- Maximum torque (Soft / Hard Joint)
- 451 in-lb (soft joint)
- Description
- Reciprocating saw engineered for extremely heavy-duty serial demolition and cutting to length with minimal vibration and advanced ergonomics
- Base material
- Metal, Wood, Mineral
- Stroke length
- 1-1/4 in
- Stroke rate
- 2650 strokes/minute
Nuron
- Description
- Versatile 22V Li-ion battery with optimal balance of weight, power and run time for use with Nuron power tools
- Weight
- 1.67 lb
- Dimensions (LxWxH)
- 6.1 x 3.4 x 2.1 in
- Working temperature range
- 1 - 140 °F
- Description
- Tool kit containing everything you need to start welding using Hilti Stud Fusion, in a case
- Application
- Fastening to steel
- Certificates
- CE
- Operating Temperature Range
- 5° C - 40° C
- Description
- Replacement filters for use with Hilti air cleaners
- Additional Accessory Information
- 99.97% filter efficiency
- Filter type
- Dry
- Filter efficiency
- 99.95% filter efficiency (EN 1822-1), 99.97% filter efficiency (ASTM F1977-04)
- Description
- Cleaning kits for powder actuated nailers
- For use with (tools)
- All DX tools
- Additional Accessory Information
- Flat brush for cleaning DX tools
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- All DX tools
- Pole tool length
- 36.61 in
- Description
- Tester for proof loading and determination of pullout resistance of anchors and DX fasteners
No technical data available
- Description
- Versatile diamond coring machine for handheld or rig-based coring from 8-162 mm (5/16 - 6-3/8") in diameter
- Diameter range
- 5/16 - 6-3/8 in
- Base material
- Concrete, Reinforced concrete, Asphalt, Masonry
- Operation mode
- Hand-held and rig-mounted drilling system
Nuron
- Description
- Cold-cutting cordless metal saw for extra-fast, precision cutting up to 60 mm│2-3/8” depth (Nuron battery platform)
- Max. cutting depth
- 2.36 in
- Blade diameter
- 6.5 in
- Base material
- Metal, Steel, Stainless steel, Non-ferrous metal
- Description
- Reciprocating saw blades for cutting 3-8 mm (1/8 - 5/16") thick metal
- Product Class
- Standard
- Shank
- 1/2 in universal shank
- Teeth per inch
- 14
- Description
- Small, semi-adjustable and braced angle bracket, for box profiles and C-Channel structures with 3D loading in moderately corrosive environments
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 3 mm
- Description
- Compact, light diamond coring machine for wet or dry handheld coring from 16-162 mm (5/8 - 6-3/8") in diameter
- Diameter range
- 5/8 - 6-3/8 in
- Base material
- Concrete, Masonry
- Operation mode
- Hand-held drilling system
Nuron
- Description
- Cordless LED light with powerful long-range beam and 3 modes (searchlight, floodlight, and combined) for illuminating work areas (Nuron battery platform)
- Brightness
- 1800 lm
- Weight
- 2.87 lb
- Description
- USB charging adapter for Hilti 12V batteries to charge tablets, phones and other devices with USB-C or USB-A ports
No technical data available
- Description
- Extremely compact, light and mobile diamond coring machine for rig-based concrete coring from 16-162 mm (5/8 - 6-3/8") in diameter
- Diameter range
- 5/8 - 6-3/8 in
- Base material
- Concrete
- Operation mode
- Rig-based drilling system
- Description
- Hard-sided carrying case for storing and transporting your Hilti measuring device and its accessories
- Types
- Individual tool cases
- Compatible with
- Measuring devices
- For use with
- PR 3-HVSG
- Description
- Hard-sided carrying case for storing and transporting your Hilti rotary hammer and its accessories
- Types
- Individual tool cases
- Compatible with
- Rotary hammers
- Dimensions (LxWxH)
- 17.5 x 15.6 x 4.7 mm
- Description
- Bending bar to test weld integrity during stud fusion
No technical data available
Nuron
- Description
- Compact top-handle battery cut-off saw, for cutting up to 4-3/4" with 12" blades in concrete, masonry, and metal (Nuron battery platform)
- Base materials
- All types of concrete and brick, All types of masonry (hollow brick, limestone, etc), Asphalt, Steel
- Protection class
- IEC Battery operated
- Work environment
- Interior and Exterior
Nuron
- Description
- Versatile rear-handle battery cut-off saw, for cutting up to 4-3/4" with 12" blades in concrete, masonry, and metal (Nuron battery platform)
- Base materials
- All types of concrete and brick, All types of masonry (hollow brick, limestone, etc), Asphalt, Steel, Masonry
- Protection class
- IEC Battery operated
- Work environment
- Interior and Exterior
- Description
- Compact top-handle gas saw (63cc) with blade brake, for cutting up to 4-3/4" with 12" blades in concrete, masonry, and metal
- Motor cylinder
- 63.3 cm³
- Rated power
- 3.2 kW
- Wet or dry operation
- Wet and Dry
Nuron
- Description
- Dual-bevel sliding compound miter saw with a cross cut capacity up to 100x355mm│4”x 13-3/4" (Nuron battery platform)
- Blade diameter
- 12 in
- Base material
- Wood, Plastic
- No load RPM
- gear 1: 4300 rpm
Nuron
- Description
- High visibility self-leveling laser with 3 green 360° lines and 15+ hours of run time for leveling, aligning, squaring, and plumbing (Nuron battery platform)
- Accuracy
- ±0.12 in at 33 ft
- Max. operating distance (diameter)
- 262 ft (lines), 427 ft (lines, with receiver)
- Battery type
- 22 V
Nuron
- Description
- Top-performance 22V Li-ion battery to maximize the output and run time of heavy-duty Nuron hammer drilling and cutting tools
- Weight
- 4.05 lb
- Dimensions (LxWxH)
- 6.1 x 3.4 x 3.9 in
- Working temperature range
- 1 - 140 °F
Nuron
- Description
- Cordless circular saw for wood cutting up to 60 mm | 2-3/8" with a faster 165 mm | 6-1/2" diameter universal wood saw blade
- Max. cutting depth
- 2.36 in
- Blade diameter
- 6-1/2 in
- Base material
- Drywall, Fibre board, Fibre cement board, Gypsum board, Hardwood (beech, oak etc.), Laminated board, Plastic, Plexiglass, Plywood, Softwood (fir, pine etc.), Wood, Wood composites
- Description
- Hard-sided carrying case for storing and transporting your Hilti direct fastening tool or nailer and its accessories
- Types
- Individual tool cases
- Compatible with
- Direct fastening tools